PDA

View Full Version : electrical problem in s13 hud


bo2o
04-11-2007, 06:28 AM
ok so i was jumping my car from sitting.
had cheap wires to jump with first off that sucked ass
during that we were reving the other car and i was trying to start the other
all the suddent i see the hud display flash and the rpm's jump all the way.

the car starts and runs.

but the fan, ac, hud, radio, seat belt donest work.

checked the all the fuses they all seem to be good

except: the left side fuses which were radio blower and that kinda stuff they didnt have any source but the fuses were fine.

used a test light everything checked out fine.

pulled out that 80 amp grey fused and tested both teminals and both of them are live. shouldnt one side be grounded? its weird that both side were. there was no path for the + side to go in that fuse.

another weird thing was. You now how thers 2 plugs on the positive side of the battery which are for acceccerys

the bigger one is like if it has power coming out of it. when grouded to chassis. i thought power was suppose to go into it.

the smaller one doesnt have any thing no ground or power coming out of that either.

seems to that something with that smaller wire got fried.

would something be wrong with alternator?
imma do a load test with the charging system.


please help. dont flame. i dont need 3 guys telling me to search. i dont need 4 guys tellling me i need to take english again. i always try to help out other fellow members. and this isnt my car its my friends car and its stuck on my driveway.. i dont need to know about electron theory, and the path of electricity. i know all that stuff.
im A6, and A8 certified. i know its not a big woopie doo but i do have it
and i bet my girlfriend can get it to, its that easy to get your smog licence haha

positron
04-11-2007, 01:07 PM
Check the grey 75A ignition fuse in the fuse block near the battery. When I blew mine all those things went out.

bo2o
04-11-2007, 02:08 PM
i checked it it was ok