View Full Version : I've got it fixed!!!
HKrpS13
08-06-2002, 01:10 PM
The problem I had was when I get to a stop, the RPM drops so much, the engine stops. To fix this, you need to adjust your A.A.C. (accesory air control). Turn your engine, leave it for a while, then adjust the AAC so the RPM is 700 for 91-and up and 750 for 89-90 (around there, I forgot). After that you adjust your timing.
After doing this, I had no problem until I stoped with the A/C on. When I have the A/C on, it did the same thing. I'm not sure why yet.
Starlin
08-06-2002, 02:06 PM
Mine does that when AC is off, But when I turn on the AC it idles fine. If I turn that up would my idle climb way high when I turn on the AC?
Starlin
HKrpS13
08-07-2002, 12:42 AM
I don't know about that. I think the problem with yours is either the idle is set at a low position or there's something wrong with the airflow meter.
Why adjust the idle valve when things were running just fine before?
This 'stumbling' problem happend to my '89 and it was resolved with soaking the AIV/AAC (whatever it is... i forget <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> ) in carb cleaner. Rinse, dry, stick it back on. Hasn't been a problem now for months..
HKrpS13
08-08-2002, 02:22 AM
Are you talking about the throttle body? I don't know what kind of problem you had with your 240SX but this is how I figot mine fixed.
What was your problem?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.