PDA

View Full Version : Will these parts fit an SR20DE (RWD) ??


heated heavy
04-10-2007, 10:59 AM
Can anyone confirm that these parts will fit a RWD SR20DE (Non-turbo) ?

- KA24E (SOHC) distributor cap and rotor
- 92 Sentra spark plug wires
- KA24DE (DOHC) injectors and O-rings

My car is getting a lot of fuel dumped and my oil even has a strong fuel smell to it. The car has a rough idle and dies sometimes at stops. I replaced all gaskets, so I am pretty sure I don’t have a vacuum leak. I also have a new oxygen sensor and spark plugs.
I also heard that a bad coolant temp sensor will make the car dump a lot of fuel. Is this the sensor that is connected near the water pump inlet? Also, should I change the oil right away if it seems to have fuel mixed with it, or will this even affect the cars running condition?
Also, my car doesn’t have a coolant overfill reservoir right now. Would this affect my running condition at all?

Thanks for any help.

drewc87
04-10-2007, 12:35 PM
what year is the sr20de out of. i work at an autoparts store so i can lookup the parts for both and see if the #'s are the same.

heated heavy
04-10-2007, 01:50 PM
Im not sure what the year is but its out of the S13 chassis.
Thanks alot.

drewc87
04-10-2007, 02:45 PM
ok ill check it out 2maro im about to leave work now

drewc87
04-11-2007, 07:50 AM
injectors are the same. wires from a 92 sentra should be the same if it was a 2.0. the cap and rotor will not work.

heated heavy
04-11-2007, 10:05 AM
sweet, thanks for the research. Guess Ill have to order the cap and rotor overseas.

drewc87
04-11-2007, 10:29 AM
or you could prolly use the cap and rotor of an sr20de off a sentra. i couldnt see them being different.