240sx stainless steel brake lines SWAP?

[wangan_cruiser]

im planning on installing my stainless steel braid brake lines. but later on im wondering if i tried to swap my regular calipers into 300zx brake upgrade or q45. would it be ok? anyone have a based experience suggestion? will it work?

[JDMClifford]

im prety sure you will need conversion lines or fittings. but q45 you dont.

[aznpoopy]

for 300zx brakes you will need conversion lines

[g6civcx]

im planning on installing my stainless steel braid brake lines. but later on im wondering if i tried to swap my regular calipers into 300zx brake upgrade or q45. would it be ok?

I don't know what caliper you currently have now. Therefore, I would not know if the lines that would fit your calipers would fit Z32 or Q45 brakes


anyone have a based experience suggestion?

I don't know what "a based experience suggestion" is. Therefore, I don't know if I have it or not.

will it work?

I don't know what "it" is. Therefore, I don't know if "it" will work or not.


Read this link very carefully and try to clear up your original post if you would like more detailed answers.

http://www.pdm-racing.com/products/brakeslines.html

[arkive43]

lines wont swap over... there not interchangeable...

[510skater]

i used j30 front calipers and my s13 ss lines worked fine...the lines will aslo work with q45 calipers they look the same as the j30's

[attracted]

regular lines wont work on z32 calipers not because the threading is not the same its because a regular 240 uses a banjo on the caliper therefore has the tabs on the caliper whihc wont let the banjo spin but on the z32 calipers they use a stragiht 10*1 double inverted flare fitting and the banjo tabs do not exist

you can take the risk as far as it goes for bolting it up but i can almost assure u they will come loose with time and we all know having no brakes sucks

[pbcstylez]

hey sorry to thread jack can anybody recommend a brand of ss lines they prefer and have used for z32 to s14 BMC

[g6civcx]

can anybody recommend a brand of ss lines they prefer and have used for z32 to s14 BMC

Are these two questions related? I don't understand what you're asking. What is your question?

SS lines generally replace the rubber hoses that go from the caliper to the hardline. Unless you're asking about my specific setup, which has no hardline. I have SS lines going straight from the BMC to the caliper.

Also, are you asking if anybody has used a Z32 BMC on an S14 before? Search and you will find a ton of people doing that.

Are you asking which SS lines go well with the Z32 BMC? It doesn't matter because the BMC doesn't touch the SS lines, unless you're referrin to my setup.