wont go into gear

[tougejunkie]

i was driving last night and i go to put the clutch to change the gear (uuuhhh)
and the clutch pedal was really stiff, so i couldnt press it down. luckly i was by a gas station and coasted to a stop. i pop my hood do a visual :confused: .. all i did was look to see if there was enough clutch fluid, yep, see if the lines were intact,yep and then i had no idea. i couldnt even put it into gear.. so i sit there pumping the clutch like its gonna do something. then i pull as hard as i can into 4th. after about 2 mins of trying in slams into 4th, i drive home trying not to crash becuase my clutch is hella stiff and wont go in all the way.. soo i get home and now i cant put in any gear at all. is there anything i can do?

[lok]

What kind of clutch do you have?

Maybe you broke the pivot point, where the clutch fork pivots.

Maybe your clutch threw a spring and it wont let the pressure plate release.

[smurfgcr]

are you hearing any screeching noises when you try to engage/disengage?

[tougejunkie]

its stock oem
hmmm anything i can do now? or will i have to tow it
like a clutch place?
i wonder if it will cost alot...

[tougejunkie]

are you hearing any screeching noises when you try to engage/disengage?
yes! i do! hmm

[smurfgcr]

well if you hear that, your TO bearing is probally shot and its time to replace that with your clutch and all the other stuff. if you have time and another way to get around. diy. its cheaper.

[tougejunkie]

well if you hear that, your TO bearing is probally shot and its time to replace that with your clutch and all the other stuff. if you have time and another way to get around. diy. its cheaper.
greeeat new clutch.. dam.. well is there anything i can do to move it?
or i prolly have to get it towed huh? cause i dont have any where to work on it..

[kansas240]

greeeat new clutch.. dam.. well is there anything i can do to move it?
or i prolly have to get it towed huh? cause i dont have any where to work on it..

move it, you mean drive it? No way. Call AAA. Changing a clutch is easy. Unless its parked on a hill, you are at the place you have to work on it, less you can afford to pay someone.

[tougejunkie]

would i have to replace the whole clutch? my clutch is fine, it takes a lot of abuse, prolly why that thing is broken.. cause i no if i take to a clutch place their gonna be like oh oh u need a brand new one!! and no i dont..

[smurfgcr]

if your going to take off the tranny, you might as well get a new clutch, and resfurface your flywheel. and what makes you so confident your clutch itself is alright? your gonna feel like an ass if you leave it, and that shit goes out a week after you bolt the tranny back up. you can get an oem clutch kit with clutch, TO, and pilot for about 130.

[uthemofo]

if you have the tranny off and your doing a TO bearing...why not do a clutch? is it really worth your time to put back the old one??? no..no it isnt

New clutch

[tougejunkie]

ok ok update..
i had one of my knowledgeable friends take a look at my situation..
and he sed i need a new master cyl. so i go get one and swap them out.. do some bleeding and its still hard to press down the clutch and it wont go into any gear.. so i was thought next step is slave cyl. soo i picked up one too.. i hear a buzzing noise when i press down the clutch not the distinct throw out bearing noise.. so im going to replace the slave and hope it works.. any suggestions>?