FS 1991 300zx Turbo reduced price

[chrisman2k]

Reposting with new pics and a price of 15k OBO, or trades.... looking for S14 swapped.... PM me with whatcha got

As many of us have had to do, I have to sell my toy. I am sending out a feeler to see if I can get some decent money for my Z. Its a total sleeper, and is just getting broken in after a full rebuild. Some of its highlights are:

-Fully built motor .40 over, forged pistons, 1.2 hks metal head gasket, ARP bolts through out, nismo race bearings on rods/crank, micro-polished everything, fluxed, nismo race oil pump, Nismo water pump, thermostat, re-ground cams, multi-angle valve job, and a bunch of other stuff I can't remember off the top of my head

-Koyo Radiator with electric fan conversion and manual overide
-FMIC
-Custom twin pop intake in corners of bumper
- JWT computer
-Flowed nismo 555cc injectors
-Modded JWT sport 500 turbos
-Fidenza 10.2lbs flywheel
-8 puck sprung hub racing clutch
-Nismo fuel pump
-Stainless brake lines F/R
-drilled/slotted front, drilled rear disks
-HKS SSQV
-Short throw shifter (3 inches from 1-2, and 3-4)
-SAFC II
-AVCR
-Megan split downpipes
-Megan test pipes
-5Zigan Single exit exhaust, 4inch pipe, 4.5 tip (real deal, not some ghetto welded fart can)
( For a short time i have a LaBree quad round tip dual exhaust avalible)
-Apexi EL I boost gauge
-HICAS removed
-Sweade steering wheel
-Blue LED backlite gauges (not stick on el gauges)
-Faux sweade inplace of stock tweed inserts
-and lots of other little stuff, and extras to go with it.

Click pics!

http://img1.putfile.com/thumb/2/3122202091.jpg (http://www.putfile.com/pic.php?img=4662386)
http://img1.putfile.com/thumb/2/3122202047.jpg (http://www.putfile.com/pic.php?img=4662387)
http://img1.putfile.com/thumb/2/3122202072.jpg (http://www.putfile.com/pic.php?img=4662388)
http://img1.putfile.com/thumb/2/3122202193.jpg (http://www.putfile.com/pic.php?img=4662389)
http://img1.putfile.com/thumb/2/3122202142.jpg (http://www.putfile.com/pic.php?img=4662390)
http://img1.putfile.com/thumb/2/3122202182.jpg (http://www.putfile.com/pic.php?img=4662391)
http://img1.putfile.com/thumb/2/3122202183.jpg (http://www.putfile.com/pic.php?img=4662392)
http://img1.putfile.com/thumb/2/3122202154.jpg (http://www.putfile.com/pic.php?img=4662393)
http://img1.putfile.com/thumb/2/3122202264.jpg (http://www.putfile.com/pic.php?img=4662394)
http://img1.putfile.com/thumb/2/3122202281.jpg (http://www.putfile.com/pic.php?img=4662395)
http://img1.putfile.com/thumb/2/3122202247.jpg (http://www.putfile.com/pic.php?img=4662396)
http://img1.putfile.com/thumb/2/3122202256.jpg (http://www.putfile.com/pic.php?img=4662398)
http://img1.putfile.com/thumb/2/3122202292.jpg (http://www.putfile.com/pic.php?img=4662399)
http://img1.putfile.com/thumb/2/3122202372.jpg (http://www.putfile.com/pic.php?img=4662400)
http://img1.putfile.com/thumb/2/3122202390.jpg (http://www.putfile.com/pic.php?img=4662401)

[chrisman2k]

Pardon Me! The Exaust On The Car Is Now The Labree Shown In The Pics!

[91gst]

bump for a clean 300z, looks like mine but with a shiny smile haha

[chrisman2k]

Thats what my friends say. lol

[turbo98]

Mileage? clean title? Still have ac? Any codes or anything?

[trsilvias13]

trade for a rhd silvia s13?

[FusionR240sx]

yea... mileage, clean title? reason for steering wheel setup?

[chrisman2k]

Clean title, 1178xx miles, full interior, AC (can use a checkup, i don't use it) I like the smaller wheel better than the factory one, still have it and its clean. No codes, but needs a tune, its still being broken in (260 miles on build) As the pics show, interior is probably a 9-9.5 out of 10.

[chrisman2k]

true RHD s13? pics?

[chrisman2k]

OK, lets not all jump on this at once!

[chrisman2k]

Wow, no "cash" offers either

[chrisman2k]

Bumpity bump!

[SoloZ32]

Priced high no? Why did you decided to get a rebuild. No connecting rods on the fully rebuilt motor? And what do you mean modded jwt sport 500 turbos?

[chrisman2k]

^^^^^^^ First off, sick ass looking Z :bowdown: , second, I was told from the guys at Z1 that the weekest point of the motor was the pistons, and the rest was fine for what my goals were, so they had to go. Yea, the price is a little high to start, but that is what we all do. We put our cars up for sale for a price that we feel that we should get for our car, based on time and money, sweat and tears we put in it, then factor in market price. For the modded sport 500's, when I did the rebuild, I did the turbo's too and I went with a slightly different AR's. The guy who did my turbos out in Phoenix is a garrett freek and totally certified by them. So he "spiced" them up a bit as he put it. Boost is about 300-400 revs later, but they hit way harder.:rawk:


CAR IS SOLD!!! THANKS FOR EVERYONES HELP!!!

New pics of rb25 swapped S14.5 comming soon!

[chrisman2k]

Oh, forgot to mention, i am basing the spool characteristics and the way they "hit" by my buddies car. He doesn't have a built motor, but he picked up a set of the 500's that needed a rebuild. So when Matts (pronounced motts, the turbo guy) did his, thats the way he did it. So when time came, he did the same for me. Maybe they will spool quicker because I am bored 40 over.... but I will never know because the car is gone *tear*