Complete VQ swap for sale for a 240sx, $2,650!

[Fred Allen Burge]

Hey guys/gals,

I'm selling my complete motor swap out of my S14! This will include:

Engine

Tranny (6 speed with modified shifter linkage to fit an S chassis!)

Fuel rails with proper FPR for a return style fuel setup

Alternator

Starter (350Z)

Intake manifold (350z)

Exhaust manifolds (350Z with the LH already modified to clear your steering shaft!)

Clutch and flywheel (350Z)

RWD 350Z oil pans already installed!

RWD motor mounts, ready to bolt into your 240sx!



This setup is ready to bolt into your 240, all the hard stuff is already done. I'm selling this package for $2,650 (negotiable). That's just a little more than the average SR or RB package but way, way more unique and with arguably more power potential. This motor will put down to the wheels as much or more than a stock SR with more low end torque to boot, and if you want to turbocharge it it will put down more than 300hp at 10psi or less! This requires NO modifications to your car's frame or crossmember or trannsmission tunnel.

I can ship this setup anywhere in the US for an additional charge and it will be professionally crated and protected.

If your interested you can contact me at [email protected]

http://www.engineswaptech.com/photos/vq35de_s14/images/295/original.aspx





Thanks!

Fred

P.S. I'm not getting rid of the car or quiting the project this is just a temporary necessity!

[OCIS]

If you were only in CA.

[Wes_s13]

wow good luck on the sale man..very nice swap! someone jump on this

[Fred Allen Burge]

Like I say, I can ship this anwhere! I work at a auto recycler and we have professional packing equipment and supplies to make sure it survives the trip, I'm sure we can work something out on the shipping cost.


Thanks,
Fred

[krappy]

what about harness ECU and all that?

[OCIS]

Will PM me a shipping quote to 92630.

Thanks

[Fred Allen Burge]

what about harness ECU and all that?

There's no ECU or wiring include with this, you can run a Z ecu, Maxima ECU or standalone, lots of options!

Fred

[cdlong]

what are the specs on the engine? vq30, right?

[Streak_Act]

Wsup fred! I've talked to you about this swap a lot, trying to maybe get this done, why are selling it? =(

[Fred Allen Burge]

This is the VQ35DE from an 02 Maxima, around 235hp to the wheels is about average for this motor stock. With the Z intake and exhaust manifolds and a decent exhaust I'd expect a little bit more, maybe 250hp or so.

I'm selling to get some cash together to pay off some debt and get a decent garage built so I can build this sucker right - from the ground up! Once the body is where I want it I'll pick up another VQ setup and be back on track.


Fred

[GSXRJJordan]

very cool swap... I would love to hear that VQ35 snarl from an S14. Not a bad price either, considering all the hard work's been done. Good luck!

[chris300zr]

does the swap include the driveshaft?

[Fred Allen Burge]

does the swap include the driveshaft?

I left it off the list on purpose (because I want to keep it) but if the buyer is paying asking price and paying shipping themselves then I could include the shaft for the asking price $2,650.


Fred

[Fred Allen Burge]

Tuesday afternoon bump! Buy me!

Fred

[Fred Allen Burge]

http://www.engineswaptech.com/photos/vq35de_s14/images/300/400x300.aspx

http://www.engineswaptech.com/photos/vq35de_s14/images/297/400x300.aspx

[Fred Allen Burge]

http://www.engineswaptech.com/photos/vq35de_s14/images/118/400x260.aspx

More picture bump!

Fred

[dopeyx27]

damn i want this...

[Fred Allen Burge]

No, you need this! Buy me and make the 240 of you dreams!

Fred

[Fred Allen Burge]

Still for sale, somebody's got to snap this stuff up!

Fred

[Fred Allen Burge]

Sold!





If anyone is interested in a VQ30 based package just let me know (I'm out of decently priced VQ35's right now).