Help! Sr Power Steering Copper Washers?

[GR8WHITE]

Does anyone know where to get the two copper washers that sit around the banjo bolt that attaches to the power steering pump, they go in between the the bolt and the high pressure hose that goes into the pump, i ordered the washers for the ka24de p.s. pump from nissan but they are too small. Help!

[[email protected]]

hehe which one?

http://www.streetneeds.com/uploads/auser/untitled1.JPG

looks like alot of stuff.

[[email protected]]

Simplifed non HICAS models:

http://www.streetneeds.com/uploads/auser/untitled2.JPG

[HalveBlue]

Go to your local auto parts store and see if they have anything. I went to NAPA when I lost a couple of the copper o-rings for the ABS actuator.

They were pretty pricey for a couple of copper gaskets but I'm sure still cheaper than buying directly from Nissan.

They fit perfectly and have never leaked or caused any other problems.

[[email protected]]

PART# 49726-Y0100 $2.00 EACH from Nissan

[GR8WHITE]

Thanks for the part # man, but that is the same one that i got from nissan that was too small, maybe the washer was mispackaged? And i already went to autozone to see if they had any washers that size, but unfortunately they only had some that were not quite big enough. Maybe i can go to like napa or carquest, i work in parts at an acura dealership, and we dont have anything that big.

[johngriff]

Maybe, i 2nd the trip to napa. Not too expensive vs blow p/s pump.

[[email protected]]

Go to Home depot, they have alot of these in the plumbing aisle

[GR8WHITE]

I Still Cant Find The Right Washer

[JDMClifford]

well if you really want i can buy a box of them from my local parts store and i can mail them to you. i think they are like 5 bucks for something like 260 copper washers.