s14 power steering differences

[slideways2004]

I have searched but don't have a positive answer. i have a s14 sr. i put a pump from a s13 sr on it. the pulley on teh crank has 2 ribs/teeth and the pulley on the pump has 3 ribs/teeth on it. so i'm assuming s14 sr has its own power steering pulley?

i'm having a hard time finding a stock one so if i buy an aftermarket one do i have to switch belts? or can i use teh stock one. does anyone know where i can get a stock s14 power steering pulley?

[nrg]

If you can't find one, you can use the KA24 DOHC pump on your sr20 motor.

[slideways2004]

If you can't find one, you can use the KA24 DOHC pump on your sr20 motor.

umm, i think you read teh psot wrong. i have everything except the right pulley. i'm prolly gonna buy some aftermarket egay pulleys and just buy a custom fit belt to fit

[TurK]

If you can't find one, you can use the KA24 DOHC pump on your sr20 motor.


you CANNOT do this, the pulleys will be off. Thankyou come again.


if you get the right part (s14SR ps) shit will go together.

[McRussellPants]

uhhh.. all SR20 powersteering stuff is the same.


The dudes probably trying to put it on the AC pully or using a KA pully or something gay.

[koukimonster139]

^rofl.

i got a stock s14 sr PS pulley. 20 bucks shipped.

[slideways2004]

^rofl.

i got a stock s14 sr PS pulley. 20 bucks shipped.

ok. show me a pic and we have a deal. make sure it shows the teeth

[TurK]

wow thats cheap.