PDA

View Full Version : Stupid question

Dweezil
12-08-2006, 12:10 AM
After talking about 5 lug swaps with a few people I can't remember 1 dumb thing. can you use Q45 or J30 rear hubs and e-brake assembly on an S13/14? I'e been searching and I can't find a yes or no answer. I know you can use the brakes on swapped S13s and S14s, but that's it. TIA
initial_drifter
12-08-2006, 12:59 AM
http://importnut.net/300zxbrakeswap.htm
Dweezil
12-08-2006, 01:09 AM
Already been through that, dosen't cover if you can use J30 or Q45 hubs and bearings or the parking brake. I just can't remember if you can or not.
DJPimpFlex
12-08-2006, 01:20 AM
j30 yes, q45 no on hubs
fliprayzin240sx
12-08-2006, 07:19 AM
j30 yes, q45 no on hubs

5 lug hubs? Holy shiet...i just learned something new in zilvia...I didnt know the hubs are the same. I thought only Z32 NA hubs were the only other source for it. So does that include the bearings too? And if we can use the diff off the J30 and the hubs, is it safe to say also that the axles are exactly the same and interchangeable as far as the lenght of it?
orion::S14
12-08-2006, 09:07 AM
The J30 hubs can ONLY be used as part of the upright..they don't unbolt like the Z32 and S13/S14 hubs do.

But, apparently...you can use the whole rear spindle and it'll mount correctly to your stock arms.

IIRC.

- Brian
orion::S14
12-08-2006, 09:08 AM
...oh, and it's a known fact that J30 axles interchange with S13/S14 axles.

'92-94 J30 axles are 5-bolt, '95-96 are 6-bolt (like stock S13/S14 axles).
Dweezil
12-08-2006, 11:02 AM
The J30 hubs can ONLY be used as part of the upright..they don't unbolt like the Z32 and S13/S14 hubs do.

But, apparently...you can use the whole rear spindle and it'll mount correctly to your stock arms.

IIRC.

- Brian

Thank you, that's what I coulden't remember.
DJPimpFlex
12-08-2006, 02:04 PM
^ yea what he said....