View Full Version : 300z brakes on stock s13 se rims?
teamfusion
11-20-2006, 06:24 AM
i want to do 300zx brakes up front on my s13 but i have stock s13 se rims, will the calipers fit the stock rims?
240Driver39
11-20-2006, 07:24 AM
i swore i had made a thread with pictures and such...but anyhow
26mm 1990 NA zbrakes will fit up front on these s13 se wheels. The ribbing on the backside of the wheel (seems early dohc s13's have the "right"wheels) varies and i cant find the comparison shot, but like i said, they do clear these..they will clear the others with a small spacer.
http://filebox.vt.edu/users/acjones/MVC-026F.JPG
http://filebox.vt.edu/users/acjones/wheelzbrakes.jpg
where in pa are you?
sncs14
11-20-2006, 07:41 AM
Should have searched! N00B!!!
240Driver39
11-20-2006, 12:14 PM
Should have searched! N00B!!!
that really neccessary after i have already posted an answer?..:confused:
sncs14
11-20-2006, 01:37 PM
Yes and no.
1234
teamfusion
11-20-2006, 03:08 PM
haha^ im not a newbie, just search and couldnt find the anwsere i was lookin for, anyway thanks for the answere.im gonna buy them this week
btw ,im near philly
sideview_180sx
11-20-2006, 07:06 PM
next time use different keywords. n00b haha.
ixfxi
11-22-2006, 11:59 AM
Dont use the 15" wheels.
1) Not enough ventillation
2) Dont use the Z32 calipers unless you do front, rear and master cylinder. Your bias will be off.
3) Not enough traction with the 15" wheels/tires. For Z32 brakes, you'll want wider/sticker setup.
Die.
HyperTek
11-22-2006, 10:12 PM
http://img.photobucket.com/albums/v72/streetphase/100_0376.jpg
i forgot which SE wheels.. 30MM twinturbo calipers. i think there was a 5mm spacer in there. I dont remember
skylinekin
11-22-2006, 11:35 PM
my 26mm clear with a 5mm spacer.
JesusFreakDrifter
11-28-2006, 07:36 PM
no one said anything about the rears,
and hypertek, are those the 30mm calipers, i wanna try this setup
insanequickness
11-28-2006, 09:12 PM
are you putting the brakes on stock car?
cause if so, why?
Touring240
11-28-2006, 09:47 PM
26mm cleared mine with no spacers
JesusFreakDrifter
12-15-2006, 03:40 PM
do you have pix of the rear z brakes clearing the s13 wheels.touring240 or skylinekin
chmercer
12-15-2006, 03:43 PM
why would you ever want to upgrade your brakes if you are rolling 15 inch wheels
Kn1ves
12-16-2006, 03:28 AM
give him benefit of the doubt
a) he has a good deal coming up or
b) brakes are shot, might as well upgrade them now and get it out of the way
smelly240
12-16-2006, 04:56 AM
do you have pix of the rear z brakes clearing the s13 wheels.touring240 or skylinekin
look two posts above yours - and you'll see one - hypertek posted it
http://img.photobucket.com/albums/v72/streetphase/100_0376.jpg
Im with chmercer and ixfxi on this one - if ur upgrading the brakes - u should have changed your wheels/tires to something larger first... its actually less safe
240trainee
12-16-2006, 08:25 AM
That would be the front, not the rear. I have rear z brakes, but looking how close the caliper is on the 16" z32 wheel, I am doubtful as to wether a 15" would clear a rear z brake. But I haven't had a 15" 5 lug wheel to try. Might have to steal the oem meshies off my friends crown vic one day.
JesusFreakDrifter
12-29-2006, 03:45 PM
ok. i already have swap info from searching the forums, thats not my problem, i will upgrade wheels but my brakes are shot now, and i just want to see if i can have z32 in the rear since the fronts fit. with a little work.
if the z32 dont fit in the rear then will the q45's fit, i am sure i saw that on the theses forums.
also can i just use powerslot rotors that are four lug that will fit without redrilling the z rotors? i thought i saw a red coupe for sell with yoko oni's, 4 lug, and z brakes, but he didn't specify if it was all around, and he mentioned he had powerslots.
thanks for all the help guyz
cdlong
12-29-2006, 05:19 PM
if the z32 dont fit in the rear then will the q45's fit, i am sure i saw that on the theses forums.
the rear z32s have a lot more spoke clearance so they should fit in that respect, but the rotor has a larger diameter (17mm i think) so that could be a problem but probably not.
also can i just use powerslot rotors that are four lug that will fit without redrilling the z rotors? i thought i saw a red coupe for sell with yoko oni's, 4 lug, and z brakes, but he didn't specify if it was all around, and he mentioned he had powerslots.
you can't use any 240sx rotors, powerslot or not. you can redrill z32 rotors pretty easily though.
'90RPS13
04-08-2007, 12:32 AM
Bump from the dead. As many of you know, Weapons are on back order. My Z32 Remans are in and I want to put them on. What size spacer will I need to fit them under stock steelies.
Save all the bullshit replies like: "they wont help you any with shitty rims" "pointless" and anything else you guys can come up with. I have time now to do it, and going to save myself from having to do it when the Weapons finally do arrive.
bardabe
04-08-2007, 10:54 AM
ha ha stock steelies? damn that;s a new one. I will check how big the gap is but I think maby a 25 or 35mm spacer.
'90RPS13
04-08-2007, 11:49 AM
God damn, haha, maybe I should just wait. I was thinking I would do it if I could get by with a 10-15mm spacer, but 25??? haha.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.