CST-01 wheel pic request

[joecar]

Does anybody have any pics of these on an s13. Im probaly going to get them regardless, the more sunk the face, the more I like....Have'nt decided on the color but going to go with the 18x9.5+15 in the rear and 17X9.5+15 up front, any pics would help.

http://www.speedalliance.com/wheels/images/cst/cst_01_brz_wm.jpg

[mr_240sx]

iirc the rears in that size will fit with stock rear quarters....you just need a roll and a pull! and the front i doubt it will clear your coilovers without spacers for the front!

[joecar]

Im ready for the work, Ill make them fit. Ive already have gotten my rear quarters rolled down to the bone right now, with my current setup.

[blackflag_Rms13]

IIRC he has 20mm fenders up front which will fit the 17x9.5 fine, even with a spacer for coils. The back it Cr Kai sizing, so a 225/40 and some camber will be fine. If I remember you're car, you have like a slight pull in the back, no? I know nissan4u2v or whatever had some on his s14 for a while...

[TokyoNights]

search next time dickface
http://i29.photobucket.com/albums/c252/dousan/r321.jpg
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/c9595d4a.jpg

[joecar]

kill yourself......thanks for the pics

[McRussellPants]

iirc the rears in that size wont fit with stock rear quarters....youd need a good pull! and the front i doub twill clear your coilovers without spacers for the front!

What? pipe down.

pretty sure these are CSTs

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/ph_rd07_no075b.jpg

[mr_240sx]

What? pipe down.

pretty sure these are CSTs

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/ph_rd07_no075b.jpg
too bad he asked for an s13 eh? seems to me that its an r32 and s14.

get with it!

[blackflag_Rms13]

Another pic I had on my HD, now that I remember that 180...

http://img460.imageshack.us/img460/7291/wheelscolors2wr0.jpg

[DriftSpecial180]

seems to me that its an r32 and s14.

get with it!


Its obviously not an R32 idiot...AWD can't dRiFt!!!




**Jokie Jokie, just wanted to jump on the Zilvia :mrmeph: bandwagon**

[blackflag_Rms13]

Shut up ~

[joecar]

Another pic I had on my HD, now that I remember that 180...

http://img460.imageshack.us/img460/7291/wheelscolors2wr0.jpg

yep those are the shit

[sideview_180sx]

one of the guys on here had them, powerder-coated in gold, and uses them on his track SPL s13 coupe. they fit fine. just think of pics of cars with CR Kai's same sizing and offset (maybe diff by a few mm, that doesn't make a difference). Go ahead and get them already, stop yammering, get them, mount them, post pics. Answer your own question before another idiot asks the same fitment question as you.

[chmercer]

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/c9595d4a.jpg

suit jacket hanging from wing is cooler than any rims or body kit

[A Spec Products]

one of the guys on here had them, powerder-coated in gold, and uses them on his track SPL s13 coupe. they fit fine. just think of pics of cars with CR Kai's same sizing and offset (maybe diff by a few mm, that doesn't make a difference). Go ahead and get them already, stop yammering, get them, mount them, post pics. Answer your own question before another idiot asks the same fitment question as you.

yeah

that was cfinch

too bad some fag stole 2 of the wheels from him

that was super lame

i believe that green rim picture was the motivation for him painting it that color

and it was more of a mustardish yellow than a gold iirc

[yokotas13]

question
im still working on offsets and crap, and dont need a new thread

I Have 17x8 +8s
THe 17x9.5 and the lower offset shuld fit around like mine are now right? maybe a little more outtie

[mrmephistopheles]

Offset changes questions can be answered with this.

http://marksink.com/tire_wheel_offset/offset.html

[yokotas13]

oh snap. i need overfenders in teh front at least

[yokotas13]

does anyone know if hte spoke design will clear skyline brakes? Noone has them in stock that ive seen

[sideview_180sx]

dood you are in j-land. you have more examples then anything, treat them like fitment of TE37s. you can fit those wheels on stock fenders, altho most would puss and get the overfenders.

[A Spec Products]

yes the CST will clear skyline brakes

and yes dude you are in JAPAN

why are you checking stock in USA?

haha

[blackflag_Rms13]

http://i28.photobucket.com/albums/c239/cfinch702/PICT0097.jpg
cfinch's car, 17x9.5 w/ spacer on a 50mm overfender...

[scottie]

Are these wheels called something else because Im trying to figure out who carries them and how much they are in the 17x9.5" size.


Scott

[A Spec Products]

Are these wheels called something else because Im trying to figure out who carries them and how much they are in the 17x9.5" size.

Scott

Speed Alliance is the most recent company I've seen to successfully import them (if you looked at the first pic...).

Talk to Chris @ Speed Alliance

www.speedalliance.com

[chmercer]

i think memoryfab lists them for sale as well

[chrisngo]

We are waiting for our container to come over. It should be here soon according to our contact. I will have a few sets after I fulfill back orders. If you guys have more questions let me know.

Chris

[slideshow240]

whats the prices on the 17x9.5's ?

[sideview_180sx]

whats the prices on the 17x9.5's ?
check the damn site!!!!:loco:

[alwazsidwaz]

Uhh, It doesn't say!!!!

[mr_240sx]

yes it does!!!! i just checked it! it also says the different sizes and applications.

iirc it was 275 per wheel

[blackflag_Rms13]

Uhh, It doesn't say!!!!
You're trippin' homie :down:

http://www.speedalliance.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=SA&Category_Code=cst_bymfr