F/S Ka24de turbo kit..

[jvh22a]

used for less then 3 months..  and the car has not been driven for almost a week.


 it comes with:
-Greddy 60mm peak/hold boost gauge white face. comes complete with pressure sensor, harness etc...
-greddy 60mm gauge pod(universal)
-t3/t4
-Greddy 52mm egt white face.complete with harness etc..
-egt fitting is welded on the manifold
-drain fitting
-log manifold
-delta gate wastegate 9lbs spring
-wastegate dump tube
-down pipe with 2 o2 bungs(goes down to the   steering shaft
-Intercooler pipes/hot pipe with greddy type-s bov
-toyota 7mgte intercooler
-compressor intake pipe
-silicone hose with clamps

oil feed line; just the lines and fittings, no tees
-1/8 to -4 straight
-1/4 to -4 90deg
- -4 hose end straight
- -4 hose end 90deg
- -4 hose

-$2200 obo   i think that is it

 it is still on the car; so i need about 2 days to take it off. the car is not being driven right now.

http://www.psijunkies.com/images/jvh22a/turbosetup/2002_0505_165307AA.JPG

http://www.psijunkies.com/images/jvh22a/turbosetup/icpiping.jpg

http://www.psijunkies.com/images/jvh22a/turbosetup/DSCF0015.JPG

http://www.psijunkies.com/images/jvh22a/turbosetup/240sx-front.jpg

[Matt240SE]

Why are you selling it??
Also this seems to be a complete custom kit correct?
Did you do any internal work or was it all stock besides the turbo and stuff , would lkike to know what PSI you ran on most of the time and how much power output did it have(rough estimate apprecitated also)??

Oh and last where are you located

[jvh22a]

i'm selling casue i've been trying to sell my car and can't get what i need. so i'm parting it out right now. I will have to be driving about 100miles a day in about 3 months so i'm thinking about getting a newer car.

  as for the turbo kit. the delta gate is a 9lbs spring i also have the 6lbs.
  the motor is all stock. with no fuel mods. runs great  i have not raced anyone yet so i can't really say how much faster it is.  i never raced it before the turbo kit either.

 have any other questions let me know.


&nbsp; i might even make a t4 turbo kit if i sell this kit and can't sell my car. &nbsp; who knows.... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

[Fresh 240SX]

Would you be interested in making a kit for a S13.... im debating the SR Vs Making a KA-T, SR20's are cool but this is my second project 240... my first turbo project 240 &nbsp;however, and it may just be a '89 but something still makes me feel better knowing i can go down to the local junk yard and pick a KA clean of anything i break for low costs.... besides the 0.4L extra of displacement <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[jvh22a]

hi;i can make more. but it depends on how you want it. either a t3 or t4 flange and a wastegate flange.

&nbsp;i'm going to make a new manifold where cylinder 2 and 3 go right into the flange(top mounted turbo). &nbsp;not sure when i will have time. e-mail me &nbsp; [email protected] &nbsp;and we can talk about it.