Built sr20 long block

[cfinch]

Ok last thread had alot of pointless posts and I'm only selling the longblock now so a new thread seemed simpler...

Here is a breakdown of the setup and what it cost...

stock redtop sr20det $800

Head:
Hks 264 in/exh step 2 cams $477
Peak Performance race valve springs $195
Oem valve seals $65
arp head studs $125
Apexi 1.1mm headgasket $200
Head rebuild from machine shop $220

Bottom End:
Cp pistons 9:1 comp 87mm $500
Carrillo rods $900
arp main studs $100
Front cover $240
Water Pump $70
Timing chain guides $100
Timing chain $85
Nissan bearings $150
Bore and assembly $800

Total $5,027

Ok I just got done putting this motor together and getting my car dyno'd... I decided I wanted to sell the motor before I was even done cause I realized I had got in over my head and I wan't to open a shop so I need the money. I knew I had to finish or I would never get anything back out of it. I'm always seeing a ton of bs built motors and whatnot on these forums but this is the real deal! I got dyno numbers and everything to prove this motor is put together right. I can provide compression numbers anything you want! If you got cash in your hand you can drive the car or whatever is necissary to prove that this motor runs perfect as it should.

I have not even had the chance to track this motor... I have driven the car around a couple times and it was insanely fast with a gt2871r... The motor is coming out of the car tommorow and will be ready to either be shipped or picked up.

New asking price $4,000

I need this thing gone soon! I need money...

Engine bay
http://i28.photobucket.com/albums/c239/cfinch702/Picture005.jpg

End result after tuning the engine!
http://i28.photobucket.com/albums/c239/cfinch702/Picture002.jpg

[cfinch]

accepting offers! Need this thing gooooone!

[Komatsu X]

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=1297517298

ILL TRADE YOU

[cfinch]

haha why on earth would I want an rb20... I just need cash someone make me an offer!

[Kuzumi]

the engine is almost perfect?
you are just selling because you need the money?
if so i might be interested. :eek3d:

[cfinch]

Yeah... haven't even really got to drive it much... I think I might have a buyer on the bottom end but he hasn't paid me yet. I'm just hurting for cash and there isn't a large market for something like this.

[mr_240sx]

well i know its a long shot and you said you needed the money, but interested in a trade for a gsxr 750?

[cfinch]

what year gsxr?

[qt_240]

j/w didnt you sell this engine already ?

[bambino10]

how much total you looking for the whole thing??

[cfinch]

Nope havent sold it... I stopped worrying about it because I was gonna put it back in my car cause I have some money now... I'm really set on a different motor tho... I need to let this motor go soon so new asking price for the complete long block $3,500

[qt_240]

what turbo were you using when you dynoed your car?

[cfinch]

I used a 2871 .86 exhaust housing on a stock manifold...

[cfinch]

somebody buy this!

[HellonFire]

Where is apple valley?

Tyler

[Dousan_PG]

california. southern inland

[mr_240sx]

what year gsxr?

its a 98 gsxr 750....if interested PM me for more pics as i dont want to take over your thread.

http://i5.photobucket.com/albums/y172/mr_240sx/98%20gsxr%20750/Pict0086.jpg

http://i5.photobucket.com/albums/y172/mr_240sx/98%20gsxr%20750/Pict0085.jpg

[Kuzumi]

how much do you think shipping would be to 75052? :coolugh:

[cfinch]

Not too interested in the 750...

Shipping should only be a couple hundred bucks... cmon guys buy this! haha it's a great deal! As soon as I get the cash from this I can go buy my 1jz and the parts for a single turbo setup!

[qt_240]

how about $2200 Shipped and t3/t4e turbo ?

[cfinch]

$2,200 shipped? I need to get rid of the motor but it's not like it's a junk motor... If you only got $2,200 you should be looking into something different... I would rather keep it in my shop collecting dust than give it away.

[qt_240]

$2,200 shipped? I need to get rid of the motor but it's not like it's a junk motor... If you only got $2,200 you should be looking into something different... I would rather keep it in my shop collecting dust than give it away.

hahaha.. yeah i wasnt expecting you to go ahead with it.. but thought i'd ask..im not hurting anybody...good luck with the sale man.. maybe ill save more and get your motor... or just rebuild mine.. all in all .. good luck.. you do have a nice set up.

[cfinch]

I mean I could afford to keep the motor... My life would be alil easier if I had it sold in order to put my new motor in... Otherwise it's gonna take me alil longer to make the cash to do the swap. Someone will come along at some point and buy the motor cause it's a deal for someone wanting a built motor but for the meantime how low do I go trying to speed this process up? You already made me a cash offer... Your more than welcome to make me a more appealing offer but $2,200 isn't gonna cut it and I don't need any parts right now just cash monies.

[cfinch]

keep the offers coming!

[nis_mo]

are you willing to ship to canada? edmonton alberta to be exact...also how many km are on the motor and how many km were driven on it before you dyno'd?

[ross.cottrill]

do you have pics and reciepts of the build?

[cfinch]

Umm I guess I could ship to canada... I mean if your paying for the shipping... The block has like around 1,000 miles and I did about 20 dyno pulls. I never even got the chance to track the motor and the car isn't registered so it hardly sees the streets... I don't have pictures of the build... I wish I did. I usually take pics of everything but my camera was stolen. I don't really have to many reciepts either. I'm so bad about keeping reciepts. I think I got a phase2 reciept for the head stuff. I really dont know where the reciepts are but there are plenty of people on here who could vouch that everything is in the motor I say is in it. I have pics of with the valve cover off so you can see the cams and the apexi headgasket tab. I did alot of the assembly at garageworks too so they have seen whats inside the motor.

[Kuzumi]

hmmmmmm i am getting more and more interested every day :drool:
my sr i have now is about to take a crap(knocking sound) so i am in a situation right now

[cfinch]

haha well buy this motor! I can't believe I'm having such trouble selling the motor... I guess it's hard for people to grasp how expensive building a motor like this really is. I didn't realize how much I had spent till after I was done. It's definately worth every dime I'm asking... I guess I just got to wait for someone's engine to pop and wants to replace it with something bad ass!

and a look inside the head as it sits right now...
http://i7.ebayimg.com/01/i/08/bf/21/20_1.JPG

[cfinch]

Still for sale taking offers...

[Track_Onslaught]

$3,496.79 is what i got commin to me from the military fucking with my pay for the past 9 months. i get it in on the 15th.
pm me if we can work with that