Help on fitting some wheels...

[jdmrwd]

Hi guys, I am pretty new to 240sx. I tried to search for the answer of my question, but I got no luck.:smash:
Anyway, I bought a s13 2 months ago. And now I have a set of 18x9 +20 18x10+30 . I want to know if I do need any fender mod to fit these wheels on? I was thinking I will probably need to pull front and rear fenders.
Sorry if this question has been asked 1000times... I really spent hours and I dont seem to be able to find the exact answer, also I dont wanna just guess without too much 240sx knowledge :wavey:
Thank you!

[kingsol]

With a roll fronts will be easy, no problem; rears, offsets are high and might rub coils, but again no problem.

[jdmrwd]

With a roll fronts will be easy, no problem; rears, offsets are high and might rub coils, but again no problem.
First, thank you for answering my question.
And does it mean, it would be safer to run like a 5mm spacer in the back and do I still need to pull it?

[upSLIDEdown]

First, thank you for answering my question.
And does it mean, it would be safer to run like a 5mm spacer in the back and do I still need to pull it?

I think the rear will be fine, but I'm not positive. I know FNs come in +25 and people run that.

[jdmrwd]

I think the rear will be fine, but I'm not positive. I know FNs come in +25 and people run that.
I guess I will get a pair of 5mm just incase they rub.
Thanks for answering my answer guys, I hope this place will be as peaceful as Clublexus:ughug:

[s13silady]

your best friend for the rest of your s13 owning days.

http://marksink.com/tire_wheel_offset/offset.html