help me get stock s14 stereo deck on quick plz!

[BC240]

i got everything out.. breaking the clips on the dash surround in the process because apparently they are made of balsa wood but whatever..

Basically the main harness that goes into the deck is stuck.. how do I get the harness out? i press on the sides of the harness and pull and it wont budge! am I retarted? they are little black clips on the sides of the harness that plugs in. how do I get this bastard out? thanks

[DaPCWiz]

hmmm I'm pretty sure the clip for pulling it out is top and center of the clip. If you can't do it with your hands (it can be difficult) use pliars to grab that point and push down while you pull back.

[brainfood]

flat head screw drivers are your friend
use it to gently pry it out

[BC240]

Ok well heres what broke, am i totally screwed or what? how hard is it to fix or get a new piece?? it seriously broke with almost no pressure at all. im being totally careful with everything.

http://img170.imageshack.us/img170/2861/clipshx5.jpg

[Birddowg240]

ahh the infomous radio bezel. Well you can always make that one work. If not a brand new one from courtesy parts.com for like $50 will set you streight. Sorry bout that man. I think maybe one out of every 50 people have a perfact radio bezel. You are NOT alone my friend.

[BC240]

I honestly feel better heh. I wonder if im still going to be able to install my new deck properly with it all busted like that.. I just ran my RCA gonna do my power wire next. thanks buddy :}

[projectRDM]

That doesn't matter. Remount the radio to the brackets and put it in the dash, then lay the trim over it and secure it with the OE screws. The mounts to the brackets aren't required. If you looked at it logically you'd have seen that.