PDA

View Full Version : jdm s14 kouki spoiler installation confusion

S13-KA24DET
08-28-2006, 05:27 PM
i searched but i'm lazy and i didn't have a clear understanding to some parts
i wanna install the s14 jdm kouki wing on my car
.
-on one side theres the i guess you can call it a stud, of course a 10mm nut goes on it, it's only obvious
-there's a big hole in the center, looks like something goes in there and slides in place, what's this used for? to mount the wing somehow? what goes/inserts there?
-then there's another hole at the other corner
.
so far all i know is tha ti'm going ot use that stud looking thing and double sided tape, just not sure about the big/small hole
just wondering how some of you guys installed it/what you used, etc.
Dousan_PG
08-28-2006, 05:45 PM
u use 1 of the holes
the smaller one near front
the rest of them u have to cover up (body shop or do it yourself)
and 3m tape the wing to your car.
i put on on my s14 for a bit
easy install minus the hole covering work that needs to be done.
S13-KA24DET
08-28-2006, 05:55 PM
u use 1 of the holes
the smaller one near front
the rest of them u have to cover up (body shop or do it yourself)
and 3m tape the wing to your car.
i put on on my s14 for a bit
easy install minus the hole covering work that needs to be done.

yeah i got a holeless trunk
but yeah just kinda worried and not sure how just those 2 bolts/nuts near the rear of the wing would hold up with just that and double sided tape, how'd it hold up for you?

j/w, what's that big hole on the wing used for
projectRDM
08-28-2006, 05:56 PM
The larger hole in the decklid is for the third brakelight wiring. 1994 JDM cars had the light in the rear spoiler so it's precut to accept the harness and plug. They just never changed it in 1995.
S13-KA24DET
08-28-2006, 06:01 PM
The larger hole in the decklid is for the third brakelight wiring. 1994 JDM cars had the light in the rear spoiler so it's precut to accept the harness and plug. They just never changed it in 1995.

there we go.