Kreukishot
08-04-2006, 08:34 PM
Things are priced to sell...need to get rid of everything...price too high? offer me something decent.
I believe it's a Project Nissan 3" Downpipe for the SR/KA. It's used but in great condition. polish and it'll look new...70 picked up
http://img.photobucket.com/albums/v153/yng_azn_boi/IMG_0319.jpg
Universal Used Apexi N1 Muffler with silencer. It's been sitting for awhile but it's in great condition. Just dusty. Very slight scratches on the
bottom. It was originally on a 94 accord F22B turbo...I have custom 3" piping for a 94-97 generation accord...taking offers..they go 200+ new for just the muffler?
http://img.photobucket.com/albums/v153/yng_azn_boi/Apexi1.jpg
Rear OEM S14 Kouki Bumper. Has some scratches on the passenger side. Other than that it's in very good shape. (It's a little dirty in the picture but it shines up beautifully)...know of a good body shop to repaint and it's brand new. It's still on my car. Won't pull it off till I have a for sure buyer.
Also have my rear trunk lid + OEM spoiler. Again in excellent condition. Looking for an OEM trunk lid without spoiler also in black to trade.
I have a brand new OEM JDM rear bumper for the S14 for sale as well. I have OEM style valences for this bumper to match. The valences are used and painted white. The valences are currently on ebay. Here are some pictures of the valences. The OEM JDM rear bumper is brand new in the box, just took it out to check it out.
SOLD BUMPER AND VALENCES
S14 Center Console in great shape. Some scuffs on the passenger side but nothing serious at all. 25+shipping..here's a picture of the scuffs..it's a little dusty and will clean before shipping
http://img.photobucket.com/albums/v153/yng_azn_boi/CenterConsole.jpg
Brembo Slotted 300zx Brake rotors for the front (for the 30 mm application. NOT THE 26mm). They've been used for about 3000 miles on Axxis Ultimate Brake pads. They've got rust on the middle section (take a sander or soak in WD40?...it doesn't hinder braking at all) and there's a small dink on one of the faces of the rotor (won't hurt performance ). I just want to get rid of these cheap. EDIT: BTWI'm not sure if you'd need to resurface since I used R33 calipers on these rotors (the brake pad placement on the 300zx may wear the rotor out a bit differently than the R33 (meaning the R33 calipers may not have 'worn' down the part that 300zx calipers usually wear down. anyways, the rotor can't be worn down too much since i only used the rotors for less than 3000 miles)
http://img.photobucket.com/albums/v153/yng_azn_boi/300ZX2.jpg
Slightly used PPI 650C 6.5" Co-Axial Speakers. GREAT for highs...(better than the Infinity 63.5i. 63.5is did produce better mid/lows though. I have the box for these as well. Gotta dig it up in the garage. I bought them for about 100 when it was brand new. I'll take 60 OBO
http://img.photobucket.com/albums/v153/yng_azn_boi/Speaker01.jpg
Brand New Infinity Reference Components (6010cs) Tweeters Only They are exactly the 1011T Tweeters that Infinity sell alone. I got these off a friend who just used the 6.5 woofers and was too lazy to cut a hole to use the tweeters. I've got all the mounting pieces for the tweeters as well as the Passive Crossovers that came with the components. I have NOW ONLY ONE MORE SET brand new...only taken out of the plastic for test fitment...I actually may be too lazy to install as well...Taking offers for these...they're about 30+shipping on ebay
http://img.photobucket.com/albums/v153/yng_azn_boi/Tweeter2.jpg
Random Honda Accord (I believe off a 94 LX) 14" 4 lug wheels. I have two of them...One has a brand new tire and the other has about 50%? I want to get rid of these cheap...
http://img.photobucket.com/albums/v153/yng_azn_boi/Tire12.jpg
Custom Made 12" Single Sealed Enclosure/Box. Made with High Quality 3/4" MDF Ext Dim: 20"x13"x15". 1.66 Cubic foot. Carpeted Charcoal. (It is not nearly as white as you see in the picture...It matches the grey carpet that most 240s have) Originally had an Image Dynamics IDMAX in here but I made another box. Titebond+Silicone+DryWall screws...the box is SOLID...I DONT have the terminal but it is cut for this terminal: http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=260-309
50 picked up takes it
http://img.photobucket.com/albums/v153/yng_azn_boi/SingleSub1.jpg
Brand New premade Dual 12" Subwoofer Enclosure/Box. Made with high quality 5/8" MDF. Ext Dim: 13x13x28. Each Sub has it's own chamber. ~ 1 Cubic Foot per chamber.Includes Speaker Terminals. Carpeted Black...45 picked up takes it...
http://img.photobucket.com/albums/v153/yng_azn_boi/DualSub.jpg
Slightly used Cobra 36ST CB Radios. I bought them when I was young and always wanted "walkie talkies"...anyways...you can use them to communicate at events? Go Initial D status and make sure the roads are clear in the canyons? Who knows...I just found them and want to get rid of them. I have the original boxes too and all that...40 bucks? I've no idea how much these go for...
http://img.photobucket.com/albums/v153/yng_azn_boi/CB1.jpg
S14 SE Front Calipers and Rotors. Taken off months ago replaced with R33 Brakes...decent offer takes them
http://img.photobucket.com/albums/v153/yng_azn_boi/S14Brakes.jpg
Beginner's Amp+Sub Combo. Comes with a 10" Bazooka Tube with sub and a Koiiler XM-6666 Amp ( http://www.koiiler.com/amplifiers.html ). This thing unbelieveable hits well for it's size. Not sure what type of sub this is but it says "Power Punch"...SOLD
I'll update post if I have anythign else to sell. all prices OBO...located in Glendale/Irvine, CA...shipping is available at buyers expense...paypal add 3% of total...cash is recommended for local and paypal is recommended if shipping is needed.
Trades: Rear strut bar, lsd, uhh...whatever that's worth putting on my car? haha
Thanks for looking,
Chris
818-726-0998
I believe it's a Project Nissan 3" Downpipe for the SR/KA. It's used but in great condition. polish and it'll look new...70 picked up
http://img.photobucket.com/albums/v153/yng_azn_boi/IMG_0319.jpg
Universal Used Apexi N1 Muffler with silencer. It's been sitting for awhile but it's in great condition. Just dusty. Very slight scratches on the
bottom. It was originally on a 94 accord F22B turbo...I have custom 3" piping for a 94-97 generation accord...taking offers..they go 200+ new for just the muffler?
http://img.photobucket.com/albums/v153/yng_azn_boi/Apexi1.jpg
Rear OEM S14 Kouki Bumper. Has some scratches on the passenger side. Other than that it's in very good shape. (It's a little dirty in the picture but it shines up beautifully)...know of a good body shop to repaint and it's brand new. It's still on my car. Won't pull it off till I have a for sure buyer.
Also have my rear trunk lid + OEM spoiler. Again in excellent condition. Looking for an OEM trunk lid without spoiler also in black to trade.
I have a brand new OEM JDM rear bumper for the S14 for sale as well. I have OEM style valences for this bumper to match. The valences are used and painted white. The valences are currently on ebay. Here are some pictures of the valences. The OEM JDM rear bumper is brand new in the box, just took it out to check it out.
SOLD BUMPER AND VALENCES
S14 Center Console in great shape. Some scuffs on the passenger side but nothing serious at all. 25+shipping..here's a picture of the scuffs..it's a little dusty and will clean before shipping
http://img.photobucket.com/albums/v153/yng_azn_boi/CenterConsole.jpg
Brembo Slotted 300zx Brake rotors for the front (for the 30 mm application. NOT THE 26mm). They've been used for about 3000 miles on Axxis Ultimate Brake pads. They've got rust on the middle section (take a sander or soak in WD40?...it doesn't hinder braking at all) and there's a small dink on one of the faces of the rotor (won't hurt performance ). I just want to get rid of these cheap. EDIT: BTWI'm not sure if you'd need to resurface since I used R33 calipers on these rotors (the brake pad placement on the 300zx may wear the rotor out a bit differently than the R33 (meaning the R33 calipers may not have 'worn' down the part that 300zx calipers usually wear down. anyways, the rotor can't be worn down too much since i only used the rotors for less than 3000 miles)
http://img.photobucket.com/albums/v153/yng_azn_boi/300ZX2.jpg
Slightly used PPI 650C 6.5" Co-Axial Speakers. GREAT for highs...(better than the Infinity 63.5i. 63.5is did produce better mid/lows though. I have the box for these as well. Gotta dig it up in the garage. I bought them for about 100 when it was brand new. I'll take 60 OBO
http://img.photobucket.com/albums/v153/yng_azn_boi/Speaker01.jpg
Brand New Infinity Reference Components (6010cs) Tweeters Only They are exactly the 1011T Tweeters that Infinity sell alone. I got these off a friend who just used the 6.5 woofers and was too lazy to cut a hole to use the tweeters. I've got all the mounting pieces for the tweeters as well as the Passive Crossovers that came with the components. I have NOW ONLY ONE MORE SET brand new...only taken out of the plastic for test fitment...I actually may be too lazy to install as well...Taking offers for these...they're about 30+shipping on ebay
http://img.photobucket.com/albums/v153/yng_azn_boi/Tweeter2.jpg
Random Honda Accord (I believe off a 94 LX) 14" 4 lug wheels. I have two of them...One has a brand new tire and the other has about 50%? I want to get rid of these cheap...
http://img.photobucket.com/albums/v153/yng_azn_boi/Tire12.jpg
Custom Made 12" Single Sealed Enclosure/Box. Made with High Quality 3/4" MDF Ext Dim: 20"x13"x15". 1.66 Cubic foot. Carpeted Charcoal. (It is not nearly as white as you see in the picture...It matches the grey carpet that most 240s have) Originally had an Image Dynamics IDMAX in here but I made another box. Titebond+Silicone+DryWall screws...the box is SOLID...I DONT have the terminal but it is cut for this terminal: http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=260-309
50 picked up takes it
http://img.photobucket.com/albums/v153/yng_azn_boi/SingleSub1.jpg
Brand New premade Dual 12" Subwoofer Enclosure/Box. Made with high quality 5/8" MDF. Ext Dim: 13x13x28. Each Sub has it's own chamber. ~ 1 Cubic Foot per chamber.Includes Speaker Terminals. Carpeted Black...45 picked up takes it...
http://img.photobucket.com/albums/v153/yng_azn_boi/DualSub.jpg
Slightly used Cobra 36ST CB Radios. I bought them when I was young and always wanted "walkie talkies"...anyways...you can use them to communicate at events? Go Initial D status and make sure the roads are clear in the canyons? Who knows...I just found them and want to get rid of them. I have the original boxes too and all that...40 bucks? I've no idea how much these go for...
http://img.photobucket.com/albums/v153/yng_azn_boi/CB1.jpg
S14 SE Front Calipers and Rotors. Taken off months ago replaced with R33 Brakes...decent offer takes them
http://img.photobucket.com/albums/v153/yng_azn_boi/S14Brakes.jpg
Beginner's Amp+Sub Combo. Comes with a 10" Bazooka Tube with sub and a Koiiler XM-6666 Amp ( http://www.koiiler.com/amplifiers.html ). This thing unbelieveable hits well for it's size. Not sure what type of sub this is but it says "Power Punch"...SOLD
I'll update post if I have anythign else to sell. all prices OBO...located in Glendale/Irvine, CA...shipping is available at buyers expense...paypal add 3% of total...cash is recommended for local and paypal is recommended if shipping is needed.
Trades: Rear strut bar, lsd, uhh...whatever that's worth putting on my car? haha
Thanks for looking,
Chris
818-726-0998