FS: S13 SR and KA24E parts!!! w/ pics

[mosill]

I have a couple spare parts I’m looking to sell to wrap up my project for now. I will be studying Spain starting in Sept. so I will only sell, for now, for a couple of weeks.

I am in the Dallas, Tx area (75052).
You can contact me via PM, AIM: BDR1BDR1, email: [email protected] , or simply reply.

I’m willing to ship most parts, unless they are big or really heavy then pick-up would be required. Some prices are OBO so I will take offers, but please no low balling.

All parts are from an S13 unless indicated.

****For the time being please shoot me an offer and I will post prices as soon as I get everything posted.

SR ignitor chip

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/brakecylinder.jpg
JDM 180sx Brake master cylinder: Came with my front clip and has a bigger reservoir.

http://i67.photobucket.com/albums/h314/mosill/ecu.jpg
KA24E ECU

http://i67.photobucket.com/albums/h314/mosill/MAF.jpg
KA24E MAF (same as S13 SR)

http://i67.photobucket.com/albums/h314/mosill/brembo.jpg
Z32 Brembo cross-drilled and slotted 30mm rotors: They are drilled for 4-lug and can be used on both 4 and 5 lug hubs. They have never been used. I was going to use them until I found out I had 26mm calipers.

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/struts.jpg
Stock S13 struts and springs: I’m guessing they have about 100K on them since the shell I bought wasn’t running and read 100K.

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/steering.jpg
JDM steering column w/ key: Off of my 180sx RPS13 clip

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/radiator.jpg
Koyo aluminum KA radiator: It is brand new and has a few bent fins from being mounted but was never used. I upgraded to a bigger radiator and did not need this one.

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/crossoverpipe.jpg
Heavy throttle crossover pipe: Used for a KA radiator on an SR. Was going to use with the radiator above but bought the SR instead. It has never been used only mounted.

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/rearend.jpg
JDM 180sx rear end: Only needed the LSD and rear sway bar from it. It still has the hubs cables, and some suspension parts, rusty rotors. **Pick up only
OEM S13 sway bars:
Cross member: Also came with my clip

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/radiatorfans.jpg
OEM electric fans: One from KA and SR, not sure that it makes a difference.
OEM KA radiator: Probably no good and will prob. trash or give away **pickup only

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/misc.jpg
JDM heater core: Came with my clip.
Heat shields: KA24E, SR manifold, SR turbo

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/LSD.jpg
Open diff w/ axles: I swapped it out for my LSD.

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/hotpipe.jpg
JDM SR or FC SMIC Hotpipe: It has a Greddy Flange and can be used on either car.

http://i67.photobucket.com/albums/h314/mosill/injectors.jpg
http://i67.photobucket.com/albums/h314/mosill/For%20Sale/fuelrail.jpg
KA24E fuel rail
KA24E injectors:

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/driveshaft.jpg
JDM 180sx driveshaft: Came with my clip.

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/blacktoprail.jpg
S13 SR blacktop 330cc injectors and fuel rail: Upgraded to bigger injectors.

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/airbox.jpg
KA24E air box, piping, and filter:

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/tranny.jpg
KA24E tranny: **Pick up only

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/KA24E.jpg
KA24E: It was pulled from my shell with about 100K miles on it. The motor had a knock when I bought it and I never took the time to find out what is wrong with it. It can be used for parts or to be rebuilt. **Pick up only

http://i67.photobucket.com/albums/h314/mosill/For%20Sale/spoilerback.jpg
http://i67.photobucket.com/albums/h314/mosill/For%20Sale/spoilerfront.jpg
Erebuni GTR spoiler: Its silver w/ a clear LED brake light. It has never been mounted and was originally bought for my Camry, but I went with a different wing. The paint has a couple scratches from storing but overall is still in brand new shape. I’m not sure what all it will fit but I can measure it, if you would like.

If I come across more parts in my garage I will post them.

[s13silvia123]

pix's of the rotors please pm me and how much you want for these rotors. its for the 30mm calipers rite. interested in the rotors.

[mosill]

Yes they are for the 30mm Z32 caliper. I will take a pic when I get home after work. What's your zip so I can see how much shipping will be and then I can get you a more reasonable price.
Thanks.

[mosill]

I just added more pics and new parts!!!

[thundering02]

You will have a pm about the engine shortly

[mosill]

JDM 180sx brake master cylinder added!!!

[Ameerov]

$20 shipped for the hot pipe with greddy flange?

[golf]

price for radiator ? shipped to 91605
thanks

[AllenRPS13]

how much u r asking for the Koyo radiator?

[JesusFreakDrifter]

aren't those 370cc injectors if so, consider them sold

[ibi]

How much for the stock set of KA24E injectors? They will work in a '92 Stanza XE I presume? Please email me a jeffpresnail @ gmail .com

[tanik]

Yea how much for the koyo radiator?

[punxva]

yes how much for the koyo, also do u have any more detailed pics of the bent fins?

[JesusFreakDrifter]

injectors and oil pan if you can

[CrimsonRockett]

How much for the wing shipped to 90280?

Something to replace my old hatch lid w/holes.