RBWannaB
07-01-2006, 03:37 AM
Basically, I started working on this car about 3 months ago. I since got a new job and havn't had as much time to put into the project. I also purchased a Mustang and would rather put my time into that now. I have just lost interest. The car has never been driven since the swap. 95% of the parts are 100% brand new.
The car is a white 5spd 1995 240sx RB20DET w/ about 120k on the body. The RB20 has the usual 35-40k on it. The motor was imported from a dealer in Canada, and idles and runs strong.
I was building this car to push 350-400hp, so there are quite a few aftermarket parts. Here is list of what I am including with the car:
RB20DET
Cheapo 17x7 white wheels (not in good condition...good for track use only)
BRAND NEW set of SportMax 006 17x9 wheels (still in boxes...no tires)
Godspeed FMIC w/ 3" Core
HKS SSQV style BOV
Two 12" Electric Fans
Custom MA Motorsports 3" Downpipe w/ Testpipe
HKS 3" Catback Exhaust
Carbon Fiber Spoiler (can't remember make but it was a $300 wing)
Carbon Fiber side mirrors
BRAND NEW T3/T4 turbo (was going to upgrade turbo w/ install)
50ft of header wrap
Box of 10 NGK Spark Plugs
JGY 10lb Flywheel
JGY 6-Puck Clutch (good to 550hp)
Tach Signal Converter (allows me to use stock guage cluster and tach)
AGX Shocks/Struts
Tein Springs
Sony Xplod speakers all the way around (came with car when I baught it)
I am sure there is more buts it's late and I can't think right now...
Now for the issues with the car...There are some dents just behind the passenger door. The front bumper is also a bit scratched from when the motor was installed and could use a re-painting. The interior trim around the shifter and radio could use replacing. The car also needs an upper intercooler pipe (to go from i/c to throttle body), and an RB20 Maf...I have an RB25 Maf but I am not 100% sure if that will work.
I would like to sell the car as-is, just because I don't have much time left to tinker with it. It is driveable now, it only needs tires for the new wheels and an RB20 Maf. Due to the labor already put into the car, as well as the huge amount of aftermarket parts, I would like to get around $8500 for everything. However I am 100% open to all offers.
PM me or email me at: [email protected] for more info. The car is located in Ellicott City MD.
I will take pictures this weekend and post them online. Anyone seriously intersted can give me a call at: 443-285-9981
The car is a white 5spd 1995 240sx RB20DET w/ about 120k on the body. The RB20 has the usual 35-40k on it. The motor was imported from a dealer in Canada, and idles and runs strong.
I was building this car to push 350-400hp, so there are quite a few aftermarket parts. Here is list of what I am including with the car:
RB20DET
Cheapo 17x7 white wheels (not in good condition...good for track use only)
BRAND NEW set of SportMax 006 17x9 wheels (still in boxes...no tires)
Godspeed FMIC w/ 3" Core
HKS SSQV style BOV
Two 12" Electric Fans
Custom MA Motorsports 3" Downpipe w/ Testpipe
HKS 3" Catback Exhaust
Carbon Fiber Spoiler (can't remember make but it was a $300 wing)
Carbon Fiber side mirrors
BRAND NEW T3/T4 turbo (was going to upgrade turbo w/ install)
50ft of header wrap
Box of 10 NGK Spark Plugs
JGY 10lb Flywheel
JGY 6-Puck Clutch (good to 550hp)
Tach Signal Converter (allows me to use stock guage cluster and tach)
AGX Shocks/Struts
Tein Springs
Sony Xplod speakers all the way around (came with car when I baught it)
I am sure there is more buts it's late and I can't think right now...
Now for the issues with the car...There are some dents just behind the passenger door. The front bumper is also a bit scratched from when the motor was installed and could use a re-painting. The interior trim around the shifter and radio could use replacing. The car also needs an upper intercooler pipe (to go from i/c to throttle body), and an RB20 Maf...I have an RB25 Maf but I am not 100% sure if that will work.
I would like to sell the car as-is, just because I don't have much time left to tinker with it. It is driveable now, it only needs tires for the new wheels and an RB20 Maf. Due to the labor already put into the car, as well as the huge amount of aftermarket parts, I would like to get around $8500 for everything. However I am 100% open to all offers.
PM me or email me at: [email protected] for more info. The car is located in Ellicott City MD.
I will take pictures this weekend and post them online. Anyone seriously intersted can give me a call at: 443-285-9981