SR20DET intake

[srJOEYdet]

I am curious what intakes will fit on the sr20det. Do the same intakes fit both the Ka's and the sr's? I really like the injen intake with the CAE... Any help would be great. (I would have used the forum's search, but it is still down)

[transient]

Turbo engines don't use that type of intake. They generally just have a filter coming off the turbo, maybe with a small pipe to distance the filter from the engine a bit.

[AceInHole]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (transient @ June 15 2002,11:17)</td></tr><tr><td id="QUOTE">Turbo engines don't use that type of intake. They generally just have a filter coming off the turbo, maybe with a small pipe to distance the filter from the engine a bit.</td></tr></table><span id='postcolor'>
The pipe distances the MAFS from the compressor. &nbsp;Too close to the compressor and the air flowing through the MAFS might be turbulated or inconsistent, and throw off MAFS readings.

[srJOEYdet]

Geeze. I knew that. Of course the intake won't be the same, it has to go through turbo and intercooler. I should have been flamed for that one. LOL. What intakes do you guys have on your SR's? (anybody) thanks

[rotaryknight]

I'm using the HKS Racing Suction. &nbsp;It replaces all the stock rubber piping and bend from the turbo inlet all the way to the MAF with mandrel bent polished alum piping.. &nbsp;The filter element bolts right to the MAF and has an internal velocity stack.

[srJOEYdet]

The only place I found that sells the supr suction intake for a silvia wantes $830 for it. That has to be bogus... It is, isn't it? And that wasn't in yen, or some other forign currency. Where did you get yours? Thanks,

Joey

[nrcooled]

I am just using a classic cone type filter w/ an OBX adapter that goes on the stock piping