Where can I get 280x26mm, 4 lug Brembo Blanks?

[reverend_sean]

I have 180sx brakes and my JDM rotors are SHOT!!! I can't find a shop in the entire Louisville, KY area that will redrill 90 N/A Z32 rotors for my 4 lug hubs, does anyone know if you can buy these redrilled for my car anywhere? Or does anyone know of a shop local to them that I could send some rotor to get them redrilled? My car is off the road until I get the damn rotors.

[ManoNegra]

www.pdm-racing.com (http://www.pdm-racing.com/products/brakesrotor.html)

[reverend_sean]

Thanks, I think PDM only does the slotted and/or drilled rotors. I really only need plain rotors, I sent them a question and am waiting for a response.

[punxva]

have you tried just a plain old machine shop?

[reverend_sean]

I have called every machine shop in Louisville and no one will do it for me. I am moving to Chicago soon, hopefully I can find a shop there that will help me out. Anyone know of a machine shop in Chicago that will do it for me?

[MAX Power SR]

heavy throttle has um

[AznXstazy]

umm, u might b able to do it urself.

[b4racing]

Just put the 4 lug on top of the 5 lug. Put a bolt and nut through both of them. Drill the second hole and then put another bolt and nut through them. Then drill 2 more holes. I have not done this yet, but I plan to when i get my Q45 rotors.

[projectRDM]

9/16 inch drill bit, drill press, and 60 seconds of your time.

[statik]

9/16 inch drill bit, drill press, and 60 seconds of your time.

and a can of spray paint for alignment of course

http://www.teamhpi.org/gallery/d/1293-2/DSCN0657.JPG

[iMAGE976]

i got mines from heavy throttle...

[HyperTek]

dam never thought about hte spray can.. just eyeballed it with the hub on top, but it came out perfect. Its not hard to do. I used a borrowed drill press. Harbor frieght has em for like 40bucks i think