1jz gte in my 240/silvia....pics

[sc300turbo]

i know a lot of people may not like it...but here is my project.....plase feel free to make intellegent comments :)

well my project is comming along nice...i was at the shop all day yesterday working on installing the motor and tranny....
im gonna post some pics so far....
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture077.jpg
on the way to the shop
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture003.jpg
clip...jzx81 5spd
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture004.jpg
engine in the clip
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture078.jpg
analyzing the situation
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture082.jpg
dropping it in
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture080.jpg
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture091.jpg
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture095.jpg
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture096.jpg
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture099.jpg
tranny bracket being made
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture089.jpg
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture081.jpg
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture092.jpg


the set up is going well..the shifter is a little forward but we will cut and bend and correct it....motor mounts will be worked on in the next comming days....
since im not running a.c im going to move the engine a little forward which gives me alot more room around the engine and room to work....i will be putting my electric fans in front of the koyo radiator for extra clearance
the tansmission tunnel fits the tranny just fine...a custom mount will connect to a stock s13 vlsd rear end...
comments and such are welcomed...i have worked slowly on this project for over 2 years now...so its very excting to see it where it is today...hopefully running by the end of the month..
Jeff

[SlappieBooBoo]

nice work mayne
this looks interesting can't wait to see it finished

[SimpleS14]

That is some nice work you have going on there. Do you mind telling me why you decided to do this swap?

[SoCalS14]

Interesting...I will be curious to see how it turns out.

[sc300turbo]

thanks for the compliments....
i decided on the motor because ive allways had turbo 2jz engines and love the durability and power potential of the supra motors...love 6cyl torque and exahust note.......so i wanted a 2jz at 1st....but i wanted a manual car and wanted to keep prices down..this is just a fun project for street driving.....occasional road course scca fun and occasional drag fun...i want it to be an all around car..and felt the 1jz would fit my price and power wants just fine.....i want 400-500 rwhp on boost with a mid size single turbo and nitrous...like a 100 shot for fun times drag racing......

so a 1jz for 2800 complete...full clip vs a 5000-6500 2jz 6spd clip seemed more reasonable...and i can mod this motor to my power goals with the exta $$$
as i complete the mounting and get it running ill update with pics
Jeff

[mrmephistopheles]

are those Longchamp XR-4Zs?

[mr_240sx]

dayum interesting project! hope everything turns out the way you want it to! makes sure to keep us updated on the progress.

[sc300turbo]

oh forgot to mention i like to be different..think outside the box :)


and yes they are longchamps...kai edition...perfect condition
16x7 and 16x8
XR-4Zs

[SimpleS14]

Let us know about the ease of installation and any issues you ran once your done. I'd like to know this as well as wiring....and if your willing to make those brackets for the 240SX community. ;)

[sc300turbo]

this is going to be a one time fabrication....plus im putting my engin very forward...most people will want a/c and have theres further back....
but it is a very do able swap so far...just need a half way decent fabricator shop and you wil be able to pull it off...
one thing though.you need a front sump oil pan for the 1jz....

[DJPimpFlex]

^most people will want the motor futher back to offset the weight of the motor. Fuck AC! lol Good shit man, thats going to be cool once its done.

[koukidough]

Nice work! Looks like your trannymay rubb the right side of the tranny tunnel. Hammer time?

[sc300turbo]

for the tranny tunnel that was early in the day before final mark up...final position gives me plenty of room all around....

as for weight balance...there really isnt a major significant differance between the 2.4 kat and 1jz...1jz is heavier but minimaly and with no a/c up font...battery in back....it should be a wash as far as weight balance...i will scale the car later both for weight and corner balance.....also solid engine mounts will keep everything from even comming close to rotating and rubbing....

and as far as moving forward..im talking an inch or 2 forward...thats it.....
Jeff

[fliprayzin240sx]

Are you doing the install yourself or do you have a shop to do it? if your doing it, are you planning on making mounting kits for this engine into the S-chassis? Im pretty sure there are some people out there who would be interested on kit.

[infinitexsound]

intresting.. i wish i had a lift.........

[AllenRPS13]

nice work, looking forward to see it finish, try to post some pics later

[b-s14]

make custom mounts!

[Edcel]

ARE YOU OUTTA YOUR FUCKIN MIND??!!!...........
HE REALLY IS OUTTA HIS FUCKIN MIND!!!!
-Dane Cook




That looks sick post videos when done please...:w00t:

[kouki-gymkhana]

Looks like your project is coming along nicely. Good luck with the rest of the swap. Would love to check it out once its done and compare it to my RB25 swapped s13 hatch (I'm from Miami too!) BTW,...is that Country Walk I see in the background of that first pic of your car on the flatbed? LOL

[SoSideways]

I think I sold you the door panels from way back in the day lol

[sc300turbo]

well the swap is going well..engine, tranny and drive shaft are all mounted up..
ran new fuel lines and clutch line
just mounting up the radiator, fans,intercooler and wiring left...
hoping to have it running by the end of the month

yes the pic on the flat bed is country walk....your good...lol

i might have gotten your panels.....black and non power....

thanks for all the comments...i cant wait to get pics and get it running..ill post more pics soon
Jeff

[exitspeed]

What are your plans for the future? Grip, Drift, or hard park? Looks like a nice project. Keep up the good work. And keep us updated.

[sc300turbo]

future plans are a small to mid size single turbo and alot of suspension work.....i love all kinds of racing..so i want a set up i could take to the drag strip and hit 10s in...but i also wanna do some road racing...down here in miami theres some groups that run down at homestead miami speedway...and id really like to do that too....im not really into drifting..but i do enjoy sliding out the rear end here and there....we will see how it goes.....im not closed minded to anything with this car...
this car is just build for fun ...as a weekend toy.....my daily driver is a turbo lexus......
so i wanna set it up as a great performing all around car.....
my goal is 2500lb car with 500-600 reliable rwhp
lets see how close i can get
Jeff

[exitspeed]

You should turbo the 5.6 Lt in the Titan...hahaha

[sc300turbo]

trust me ive considered it.....even thought about doing a 5.6l 240sx swap.....but there is no manual tranny for the engine...oterwise i would have seriously considered it....
still waiting for a good supercharger for the truck to come out :)

[exitspeed]

trust me ive considered it.....even thought about doing a 5.6l 240sx swap.....but there is no manual tranny for the engine...oterwise i would have seriously considered it....
still waiting for a good supercharger for the truck to come out :)


If I bought a truck I'd get a Titan (or a Ridgeline cause it's got a built in beer cooler). But I really have no use for one.

Anyway sorry to get offtopic.

Good Luck.

[S14-vietusmc]

theres a guy on the turbo240 forum that did the 1jz swap... really sweet dude...

[Pank]

Why wouldn't people like this? i think this is awesome. Keep up the good work, man. (p.s. want to buy a 5m out of a cressida? hahahaha, GOD no one does)

[jdm538]

now why do you make it looks so easy? very nice project, thanks for posting great visuals.

[CaoBoY]

please share the info on the wiring/mounts! i wanted to turbo my 240, but then, after doing a little research, it should cost about the same to have a 1jz swapped in (doing the wiring yourself, with someone doing the fab work) as to have a sohc turbo kit. you could have more reliable streetable power from the 1jz also...good luck! i would love to follow your steps soon...heheheh

[SoSideways]

Yeah, black non powered door panels from Melbourne, FL!

hahaha

Glad to see the engine in the car ready to roll!

[1Via!]

Thats a pretty nice. The 1jz is one of few 6 cylinder engines I would put in my car.
Of course, you realize that you need the jzx81 front end on the s13 now. You'll be monumentally laaame if you dont swap the front end.

[khmerguy618]

man this looks like its coming along quite nice, any updates??

[sc300turbo]

well i guess ill be lame cause i like the s13 silvia front...its staying that way...

as for updates..
brand new steel braided fuel lines are run..fuel tank was dropped and cleaned....2 year old gas is nasty!!!
added in my walbro fuel pump
picking up the modified koyo radiator today....
engine tranny and drive shaft are complete.....new water pump...timming belt...valve cover gaskets and grommets...plugs are nice and clean....new redline tranny fluid.....redline synthetic motor oil....are in....coolant is ready to go once i get the radiator back and my wiring guy is comming over today to look at it.....
im hoping by the next 2 weeks it will be driving.....
ill keep ya posted...
once the radiator is mounted and all i will snap some more pics....
Jeff

[Sil Beer S13]

wow, i wanted to do something like that, but dont have the time to mess with fabricating stuffs.

looks good.

[mmdb]

Any updates on this project? What's the total cost of this thus far?

[freeman]

nice project.. looking good

[sc300turbo]

its been a long tough road...but im loving working on the car...the car was starte then dies...lost ignition...couldnt figure out why......turrned out when i swapped the water pump and all i managed t pinch the crank angle sensor and shorted the wires.....finally tracked it down and got it started agian to realize the stock twin turbos were bad.......swapped those....got it started agian...now need to finish wiring...get the custom exahust made......get intercooler piping made.....and bleed the clutch line...thats beeen a pin in my ass for something that should be so easy...
hoping to get it driving by jan....
ill post some newer pics tommorrow...
Jeff

[BigVinnie]

Project looks good Jeff. I'm shure you will enjoy the 1Jz as it is a bit more rev happy than the 2Jz. Has good 6cylinder torque as well. Hope to see it running by January.

[Flybert]

Ditch the clutch line loop if you still have it. Impossible to bleed with that trash in there.

[sc300turbo]

the clutch line loop is removed and i did a custom line because the slave is now on the drivers side of the car......

i made a custom steel braided line with fittings but could never get fluid to come out of the bleeder screw.....i replaced the slave cylinder and tried agian...nothting...i made a custom hard line and got fluid to finally come out of the bleeder screw now i need to get a friend to pump while i try to bleeed....

im praying to get it going...i cant wait to drive the piss out of this car
i still need to buy a carbon fiber hoood too...

[SlowCoupe]

what kind of ems are you using?

[LB.Motoring]

hey what did you end up doing with the lights and the grill off the clip?

wanna let me buy them :P

[azndummie]

thats pretty sick! Good job on the work so far

[sc300turbo]

clips and all parts were sold a long time ago...sorry.....

as for ems i have a stock ecu with a chipped board from japan....which i dont know for sure yet but 99% of those boards remove the boost cut, fuel cut, speeed limiter and turn up boost and fuel a lil bit...
with that ecu and an afc i should be able to easily meet my power goals.......i dont want to go stand alone but if i have to i will.....need to get it running solid with the current set up 1st

[sc300turbo]

http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/d561b516.jpg
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture007.jpg

couple newer pics....as you can see i pieced together piping just to make a connection on the intercooler...all new piping will be made shortly...
Jeff

[ranger2339]

Sweet bro. I am doing a 1J with a GT35r .68ar in my onevia, should be killer.

Ax

[SC_S13]

hehe toyota power in nissan chassis. thats awesome. did you have to do anything major to the drivetrain? or is that soon to come. 2 thumbs up! :bowdown:

[origin_s135]

wow. looks very good. tell us how it feel, handles, etc.

[Tenchuu]

http://www.wftv.com/news/11493988/detail.html#

this wouldn't happen to be you would it?

stupid police, but that is still trouble.

[trybal]

woah..... i wonder? although that car had a different bumper on it

[xblack240x]

Nice build, post pics and a dyno sheet when your done... You make it look so easy =) I don't think anyone would dislike this project... I know I certainly don't...

[KA-T_240]

The car looks sweet. any numbers with the new setup?

I dont think that car is even the same color as the one in this thread, the oil pan also looks wierd.

[jeeper_x]

dang..........now i understand y that guy revived the thread.....

[zugoi]

looks good man, keep up the good work.

[Ian]

Anyone notice they said it was a skyline in that article...it's clearly an S13 w/ silvia headlights

[Tenchuu]

well look at this thread, look at the later light blue pics with the triple projectors, look at the pic of the oil pan on his install, then match that pic to the oil pan of the 1JZ in that same colored car upside down in the article.

question: How many dual projector with yellow fog lights light blue 1JZ S13s are there out there?

educated guess: 1 to veary veary few.

[kevtrinh]

so im guessing it was him...

[kouki_s14]

both in florida too

[TheTimanator]

http://www.wftv.com/news/11493988/detail.html#

this wouldn't happen to be you would it?

stupid police, but that is still trouble.
well, if it is him I doubt he will be getting on here admitting to it since he fled the scene. It was a nice car with an idiot for a driver apparently. I grew up Orlando and street racing was a big problem down there. Tons of modified cars with young unexperienced drivers being irresponsible.

Tenchuu: agreed, the oil pan looks the same.

on another note: the troopers are clueless....lol

[Tenchuu]

well if it is him, i figure that someone will rat him out sooner or later, there is always a local hater who knows you. and sooner or later he will see this.


I am not saying it is him, but i am saying that there is a 98+% chance it is him, and if it isn't i wouldn't want to be mistaken for this guy.

how he doesn't not have his name associated with the vehicle, title, or anything else is interesting.

[hatchbaak]

Hmm.. hard to tell. in his latest pictures he has a carbon fibre hood wich the wrecked one does not have, and also has a different front bumper. tire tread looks different too. but then again, im no detective. What a waste... :cry:

[98koukile]

http://www.orlandosentinel.com/media/photo/2007-04/28758069.jpg
It's not him I don't think, this is from the same accident
Wasim Shahid, 43 was the passenger that died

[prang11]

wow...

message

[TheTimanator]

http://www.orlandosentinel.com/news/local/orange/orl-bk-fatalnew04022007,0,2305385.story

did you watch the video or look at the rest of the photos that was on that page? it's definitely the same oil pan.
maybe he sold it or something....

http://www.orlandosentinel.com/media/photo/2007-04/28759126.jpg

[ohspizzill]

its a skyline with a silvia front end! haha wow that was funny his car was sold only in japan. take it to a track.

[20 til 3]

its a skyline with a silvia front end! haha wow that was funny his car was sold only in japan. take it to a track.


what are you talking about dumbass? its a s13 w/ a 1jz in it...sucks that this happen to it but shit does happen...on the track or on the street...it really doesnt make a difference

[atopper]

thats kool, i wish i had the money to get a 1jz for my sc400 =P

[ohspizzill]

yeah it makes a diff. chill out on the street!

[ohspizzill]

what are you talking about dumbass? its a s13 w/ a 1jz in it...sucks that this happen to it but shit does happen...on the track or on the street...it really doesnt make a difference

hey dumb suck! read the link they say its a skyline.Yes i do know it's an S-13 with a 1jz.it dose not look the same from the pics. i guess you shold read

[blu808]

O shit


message wopper

[jrmiller84]

It has to be him. Not only is the oil pan the same, he's missing his exhaust in his earlier postings as well as in the articles photos.

http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture081.jpg

You can see it missing here, only a downpipe. Also, that doesn't look like an SR/KA tranny, but that could just be the lighting throwing me off.
http://www.orlandosentinel.com/media/photo/2007-04/28759126.jpg

I think it's highly unlikely it's a coincidence.

[TheTimanator]

^^^the exhaust fell off. In the video they showed it sitting on the ground.

You guys are missing the fact that the last picture he posted was 4 months ago. A lot can be done to a car in 4 months like a new front bumper, wheels, exhaust etc.

He was active on sfl240sx.com until a few days before this accident. Hasn't posted since then. All this speculation.... anyone tried emailing him? :rolleyes:

[1998sc2]

in the video it does not look like to me that the trans mount was made it looks like semi factory style but its hard to tell.

[91gst]

also the exhaust is on the wrong side (its coming out the passengers side) so it cant be an sr/ka/rb. And theres the stainless line coming from the tank that he said he used so Im guessing it was him. Too bad, it was a nicely done car.

[harleys]

his last post on zilvia was 12/6/06....

[tknbkthrsdy4anfg]

If it looks like and smells like...

[ECR33S14]

wow. anyone catch how they said they couldnt figure out the owner due to the fact that it is a performance vehicle only sold in europe and japan?

[sepulchral]

'his exhaust is on the supra side..

[240trainee]

No shit - :aw:

also the exhaust is on the wrong side (its coming out the passengers side) so it cant be an sr/ka/rb. And theres the stainless line coming from the tank that he said he used so Im guessing it was him. Too bad, it was a nicely done car.

[sepulchral]

well

Those with information can call Florida Highway Patrol at 407-737-2200.

[RoyalFlush]

yeah i live right by here and i actually drove by the accident scene on the way to work.
damn shame

[OBEEWON]

I just want to know how the hell the driver got out and got away? Shouldn't a hospital have reported injuries consistant with that type of wreck?

[BoostedCoupe]

it said one person died maybe the driver was the one that got killed. that sucks to see a nice car get done like that. but that aint the first nice car that will be wrecked and aint the last one either. sad story.

[exitspeed]

Wow this is freaky.

If it's him I don't think we'll ever know.

[slow40]

if i were him (and alive) i'd be editing posts left and right...haha

that's crazy...

[GSXRJJordan]

Wow... great detective work. Definitely a same-color coupe, in the same area, with the same motor. Probably him, and we probably will not ever see him again.

If you guys in the area hear more about it, post up!

[prang11]

I want more details on this. Man that car is destroyed. How would anyone survive that?

[Ikant]

they were saying that they are not sure whether it was the driver or a passenger, im betting that guy was the driver. by the looks of that car, it would be a miracle if anyone survived.

[byebye_sti]

damn, this is pretty weird, I definitely want to know more about this..

[broke240]

There is a huge post on orlandoforums about it and it does seem to be this guy.

http://www.orlandoforums.com/forum/showthread.php?t=60781&page=8

[iwishiwas-all*]

wtf??????????????????????


FYI< Jeff's car is not even running yet, so its deffinately not him, and besides this accident was almost 300 miles from where he stays

[madcow86]

i heard all of this and i called jeff up its not him his car is sitting in his back yard right now and it wont even run...

[Chez]

the thing i find funny about the news report is that they say its a skyline yet they also say it has a VIN# now that doesnt make sense since skylines dont have VIN#'s....glad to hear its not the guy from the original thread....Chez

[CoasTek240]

the thing i find funny about the news report is that they say its a skyline yet they also say it has a VIN# now that doesnt make sense since skylines dont have VIN#'s....glad to hear its not the guy from the original thread....Chez

def good news its not the thread starter...
im also confused as to how they dont know the proper model of the car.

[S13-Silvia]

Because its a 240 coupe with silvia front and Toyota motor. All the numbers are mixed up.

[Irukandji]

i heard all of this and i called jeff up its not him his car is sitting in his back yard right now and it wont even run...


I dont really believe this for a second. Im pretty convinced its the same guy.
Nice first post.

[Chez]

Because its a 240 coupe with silvia front and Toyota motor. All the numbers are mixed up.

yea but as soon as the car's vin is entered into the system you will know everything about the car. also the will track down the last known owner and find out who they sold it to. its not a difficult process...its basically a carfax but on a higher level with more info available. btw im gonna go out on a limb here, but id say whoever they visit to talk about the car, the guy in a body cast might be your guy i dont know how anyone can just get up and get out of that one and get back to life like normal. this guy has got to be standing out like a sore thumb its only a matter of time till they find him...Chez

[PITCH]

This guy Jeff said he had a turbo SC300? I beleive he's the same dude that had his Lex in F&F2.

http://www.clublexus.com/forums/showthread.php?s=&threadid=70522

same screen name too... For goodness sake I hope he sold the car to someone and they wrecked it.. Or it's not him to begin with..

[iwishiwas-all*]

I dont really believe this for a second. Im pretty convinced its the same guy.
Nice first post.
well buddy ur wrong, definately cause I can confirm this also, and anthony should know its one of his good friends. sorry guys ya got the wrong guy.

[zenki-217]

You one send Matlock a message on myspace..

[O3DigitalBath]

I still think its funny the local news was putting some of the blame on floridadrift for this drag racing accident...

[articdragon192]

WTF, florida drift is getting shit for this? Amazing.

[harleys]

well buddy ur wrong, definately cause I can confirm this also, and anthony should know its one of his good friends. sorry guys ya got the wrong guy.

so if it's not him, where is the thread starter?

[Howard92884]

Stupid fucking street racers. Have to try and show off how cool their cars are and now someone is dead. Keep it off the streets and on the track. Crazy coincidence btw.

[20 til 3]

everyone screws around on the streets

STFU NOOB

[articdragon192]

There's a difference between screwing around and actually having someone killed.

[coreansurfer]

everyone screws around on the streets

STFU NOOB


:mrmeph: :mrmeph: :mrmeph: :mrmeph: :mrmeph: :mrmeph: :mrmeph:

[20 til 3]

There's a difference between screwing around and actually having someone killed.


having someone killed?

ok, so you guys are saying that you will not crash unless your out screwing around? things happen every day just driving normal and its dumb for people to talk about how bad it is because they were screwing around...like it makes it different or something

i'd rather die drifting/ any form of racing than being hit by a drunk driver

[projekt_s13]

wow this is crazy!

[projectRDM]

having someone killed?


i'd rather die drifting/ any form of racing than being hit by a drunk driver

We'll make sure you do then.

[articdragon192]

+1 Screwing around on the streets just increases the risk and how much damage you can do. Not only that, but you endanger others, people you don't know.

[speedstar01]

this story is quite interesting. im curious to see how it tunrs out

[harleys]

i still say it's the original poster. 2 cars, silvia front, same motor, same color in same area? yah right.

[91gst]

yeah im with harleys, its a pretty freaky coincidence if its not the guy. ill believe it wasnt the original poster when he comes back on with pics of his car still intact.

[KwKouki]

2 completely different cars. I spoke with him on AIM a few days back.

[eastcoastS14]

i'd rather die drifting/ any form of racing than being hit by a drunk driver

Id rather die in a bed in my home an old man surrounded by family and friends rather than bleeding out on the highway with broken bones cause i felt the need to show off...but thats just me...i guess dying in a drifting accident is cool tho:ugh:

and yeah i would really like more info on this swap has anyone done a real write up on this?? i cant find one.. 1jz seems like a good alternative to any nissan I6 if its not too complicated...searched around and 1jz's are pretty cheap compared to a sr or rb...so seriously someone should post or do a detailed write up:bigok:

[eastcoastS14]

http://www.youtube.com/watch?v=O7k7jHcn5F8

1jz FTW not the same car but holy hell....i demand a write up now:bigok:

[Howard92884]

having someone killed?

ok, so you guys are saying that you will not crash unless your out screwing around? things happen every day just driving normal and its dumb for people to talk about how bad it is because they were screwing around...like it makes it different or something

i'd rather die drifting/ any form of racing than being hit by a drunk driver

Well do us all a favor and drift into a telephone pole.:fawkd:

[20 til 3]

alright, lets put 2 and 2 together, first off...thanks for the rep :gives:

second, the cars are different colors, the guys does not have a body kit, nor does he have big ass wheels on the car...ohh also look, his car is 4 lug, the other is 5 hmm

notice in this picture the car is TAN, has a 2 tone front clip
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture077.jpg

now, look in this picture, its BLUE now for you retards, thats a different color than the first car....now i know i know that its him because you all live next door to him and know everything
http://www.orlandosentinel.com/media/photo/2007-04/28758069.jpg


:D

[projekt_s13]

^^ guess what REtard, these are the most recent pics of his car.



http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/d561b516.jpg
http://i25.photobucket.com/albums/c91/sc300turbo/240%20project/Picture007.jpg

couple newer pics....as you can see i pieced together piping just to make a connection on the intercooler...all new piping will be made shortly...
Jeff

[20 til 3]

ohh, look, it has a black hood, tan fenders and a 2 tone bumper

it really looks like a body kitted blue coupe:duh:

[TheTimanator]

ohh, look, it has a black hood, tan fenders and a 2 tone bumper

it really looks like a body kitted blue coupe:duh:
so in 4 months time he can't get the car painted, aero, 5 lug conversion and new wheels?

anyway, who cares?! a couple people have already said that it's not him b/c they know him. So as long as there not just covering for him then that wasn't his car. Give it a rest...

[burgy240]

Guys how about the fact that, although this swap is sweet and looks badass, it isn't the first time it's been done, I know of someone here in Tampa doing it to. Also, who does this quality of work on their car and then changes wheels from those sweet ass longchamps to boot leg ruff racing wheels? Hello, would any of you put that time and money into a car and then ruin it with ruff racing rims? Also, Orlando and Miami are not right next to each other???

[Justin Bernstein]

Bottom line...unless the thread starter posts on this thread...i believe the hype.

[FaLKoN240]

"Hey guys, it wasn't him. I know it was because I called him. He can't post because he broke ALL his fingers in a ham trimming accident."

"That can't be his car. It's a different color, has different wheels, and a body kit. You guys all know those things are permanent and irreversable."

Give it up, until the original poster responds with an update and pics everyone is gonna think it's him.

Plus it's Zilvia. GROUP MENTALITY. Just like the witches of Salem, you're guilty until innocent.

[projekt_s13]

"Hey guys, it wasn't him. I know it was because I called him. He can't post because he broke ALL his fingers in a ham trimming accident."

"That can't be his car. It's a different color, has different wheels, and a body kit. You guys all know those things are permanent and irreversable."

Give it up, until the original poster responds with an update and pics everyone is gonna think it's him.

Plus it's Zilvia. GROUP MENTALITY. Just like the witches of Salem, you're guilty until innocent.

haha yep, thats the truth

[20 til 3]

i just wanted to state how different the car was, and the car that rolled was orignally that blue, you can tell by how the paint came off in area's where there are scrape marks

[S14DB]

Interesting how his name has been made on other forums after the accident and posted. Yet he can post here. At the same time someone creates an account claiming to be a friend and states the same things as the other forum....

[FaLKoN240]

LOL at S14DB doing an IP check.

[Tenchuu]

Quit with the bickering, i was the one (after S14 DB brought up the subject) that ask the question. we ar not trying to burn anyone here, just asking a simple question. i am not jumping to conclusions, but I am sure an IP check can be done if it hasn't already, and someone is wayyyyyy defensive.

anyways what is done is done, don't hassle the guy, i am sure that if the owner gets caught that he will have plenty of time to think it over.

if not still waiting for the thread starter's take on it.

[Dominic Axelson]

hi, i need a cheap but clean 240 that runs, no rust or very very little hach or coupe, pm me, or email me my email is [email protected], im in IL thanks

[Sidewayzzz]

They released the name of the gentleman who died, Wasim Shahid, this guy's name on zilvia (according to his sig) is Jeff, so no it was not him.

[eastcoastS14]

hi, i need a cheap but clean 240 that runs, no rust or very very little hach or coupe, pm me, or email me my email is [email protected], im in IL thanks

:wtf: :wtf: :wtf:

^^ WTF?? did i miss somethin? lol :tweak: WTB section/anywhere but here

[sc300turbo]

Man you guys are funny.......im sorry i havent been able to post i was recovering from my injuries..lol....
im kidding...this car is not....was not and will never be mine....
my 1jz 240 is sitting in my back yard waiting to get an breaking up issue corrected.....
i do appreciate the concern...lol...and im impressed with the digging up of old fast and furious threads...lol...
i am on alot of different forums and have the same name everywhere....i am not a hard person to find.....

my car is running and driving but trying to get some issues fixed up on it..

if you have any questions id be happy to answer...
Jeff

[burgy240]

Thank you, some poeple just don't use common sense and love the conspiracy shit..

[urmyhero4now]

:2f2f: the man has come back from the dead...ahahaha...welcome back tupac...the car is sweet tho bro..:2f2f:

[sc300turbo]

just call me Makavelli...lol....

[slow40]

haha, that's awesome...welcome back

[pr0ject TRUENO]

pics of car in current state?

[sc300turbo]

the car needs some repairs right now i accidentally flipped it...
lol j/k
its in the same visual state.....its going to be visiting a shop in the next week or so to hopefully get out the bugs......and once its up and running ill get some pics....but it looks the same...all different colors and a black hood...
Jeff

[Chez]

Glad to see it wasnt you...hows the reliability of the swap btw -Chez

[speedstar01]

woot me likey pics please :)

[ooowowizstev]

very nice project forreal. cant wait to see the results

[OBEEWON]

Salt face....

[sc300turbo]

salt face???....ill work on some pics but its still looking very much the same..

[Sidewayzzz]

Wow, I get negative repped for that? Some of you guys need to go easy with that power-trip de-rep button..fucking christ.

[91gst]

whewww, im glad it wasnt u sc300turbo. its good to hear that the car is safe and under control. Get some pics or video of it going, im thinking about doing the swap and would love to hear some more specifics on how the car feels, turns, brakes and what not.

[sc300turbo]

back from the dead.....
well we got the breaking up issue fixed...bad wire harness...C&N in broward figured it out and fixed it...great guys....
got it running on the stock twins and managed to put a cheap air filter on which failed and sent a metal piece in to the stock turbos blowing them to pieces.....
so now the car was single turboed and getting going well....im dropping in 550cc injectors an safc and getting tuned hopefully this month..looking for 400+rwhp..ill get pics of the new set up soon.....but the 1jz is a very fun motor even running 15psi and 10 to 1 afr.......i like it alot...
any more questions feel free to ask...
Jeff

[InlineS13]

Pictures? Videos? What radiator is that? Is it an SR rad with a custom inlet?

[slow40]

what turbo are you going with?

[sc300turbo]

i will get the pics...dont have video yet...once i get out to the races ill get some video...
rad is a sr koyo with a modified inlet for more clearance on the TB
turbo is a cheap chinese 67mm but it works for now..i plan to replace it in the future.