PDA

View Full Version : Quick Short Shifter Question

The Island
05-18-2006, 08:10 PM
I installed my short shifter today, but I neglected to use 2 out of the 4 washers that are suposed to be used between the plate spacer and the curved metal pieces. Will this negatively affect anything? It does even seem as though those spacers are needed. Anyway I have the Megan Racing short shifter. Heres a pic.
http://i7.photobucket.com/albums/y264/onecrew300zx/picture037.jpg
The Island
05-18-2006, 09:40 PM
bump. please someone give their opinion.
SochBAT
05-19-2006, 04:23 AM
It shouldn't effect performance one bit.

Make sure the bushing is secure in the (socket the bushing sits in) on the tranny, and you should be A-Okay.
Jung918
05-19-2006, 04:56 AM
Why don't you just install the other 2 washer?
Vatche
05-19-2006, 07:11 AM
other than worrying about the washers, do you have a boot? if your figure that one out let me know
BRB26
06-06-2006, 05:14 PM
why didnt you install the other two washers?
cotbu
06-06-2006, 07:23 PM
use threadlocker or they may vibrate loose.