PDA

View Full Version : Clutch probelm...AGAIN!!


d-oom
05-18-2006, 07:54 PM
ok, so i replaced my clutch, and tranny with an unknown mileage one.

my clutch engages really high off the ground. i mean right at the top...
i get alot of vibration in 1st when im trying to slowly take off

do you guys have any ideas?

1990 hatch~~

C. Senor
05-18-2006, 08:04 PM
i dont know about the clutch problem, but the vibration could be a bad motor or transmission mount, i have the same problem, when taking off in first but its only when i try to take off really slowly and i know i have a motor mount, just no time to change it out...lol. anyways check ur mounts.

pr240sx
05-19-2006, 07:48 AM
Clutch slipping or contamination on the pressure plate or clutch disk.
As for the clutch pedal being to high, try adjusting via the master rod at the pedal.

d-oom
05-19-2006, 08:47 AM
ive replaced the clutch twice, same result.
i do have really really bad motor mounts. i mean they should have been changed a long time ago..

ill try the master rod, hopefully itll help :D

jdm_s14_zenki
05-19-2006, 12:08 PM
u have to adjust the clutch pedal per FSM

d-oom
05-21-2006, 12:05 PM
clutch is adjusted, the engagement is alot lower, and the vibration is practially gone. im guessing it was adjusted so that the clutch wasnt fully engaging