PDA

View Full Version : F/S -- 92 S13 coupe rolling chassis.

s14turbosilvia
04-05-2006, 05:22 PM
I'm in a hurry so I've got a real quick description of it.

Year: 1992
Model: Coupe
Miles: 102,xxx
Transmission: 5spd manual

Notes:
*Factory Sunroof
*HUD
*Spoiler
*Autometer boost gauge
*Nismo Shift knob
*Walbro 255lph fuel pump installed and soldered.

I have quite a few aftermarket parts available with it, so please inquire if you're interested. Absolutely no rust anywhere on the car except for along the shock tower underneath the master cylinder, which you can sort of see in the pictures. Seats are not ripped or torn, which is very un-s13-like. HUD works just fine. Full harness in tact, labeled, and ready for conversion.

Asking $1,000 for it IN MOSTLY STOCK CONDITION with a Walbro 255lph installed. Additional parts available at an additional cost.

Pics:

http://i2.photobucket.com/albums/y42/b_baker0/P1010017.jpg

http://i2.photobucket.com/albums/y42/b_baker0/Picture011.jpg

http://i2.photobucket.com/albums/y42/b_baker0/MyBaby010.jpg

http://i2.photobucket.com/albums/y42/b_baker0/MyBaby012.jpg

http://i2.photobucket.com/albums/y42/b_baker0/MyBaby011.jpg

And yes, I do have the fenders...

http://i2.photobucket.com/albums/y42/b_baker0/P1010018.jpg

and front bumper...

http://i2.photobucket.com/albums/y42/b_baker0/P1010019.jpg
s14turbosilvia
04-05-2006, 06:08 PM
What the hell...want tires too?

For an extra $150, I'll throw in (4) Bridgestone Potenza pole position S-03's (research them, $800 a set) sized 245/45 R17.
And (2) BFG drag radials sized 255/50 R16 IIRC, perfect for 300Z turbo wheels!
s14turbosilvia
04-05-2006, 10:15 PM
Also want to include that I do have the KA24DE motor with 5spd transmission that I will include for free. It will require a rebuild for bad rod bearings, but I don't need it so why not?

I will be taking more pictures this weekend of the interior to show just how good of condition this car is in!
Slidewayscoupe
04-06-2006, 12:25 AM
ill be nice and say something

nice car... i think ive seen it before... i cant remember where.
it is a very nice car and i would love to have it but i dont think that dad would be happy with me buying it.
s14turbosilvia
04-08-2006, 02:38 PM
More pictures today:

http://i2.photobucket.com/albums/y42/b_baker0/DSCN0287.jpg

http://i2.photobucket.com/albums/y42/b_baker0/DSCN0288.jpg

http://i2.photobucket.com/albums/y42/b_baker0/DSCN0289.jpg

http://i2.photobucket.com/albums/y42/b_baker0/DSCN0290.jpg

http://i2.photobucket.com/albums/y42/b_baker0/DSCN0291.jpg

http://i2.photobucket.com/albums/y42/b_baker0/DSCN0293.jpg

http://i2.photobucket.com/albums/y42/b_baker0/DSCN0320.jpg
Fat Felix
04-08-2006, 06:43 PM
looks pretty clean for a G
SunsetElixir
04-15-2006, 10:24 AM
is all the wiring intact, nothing cut off, just diconnected. Michigan?
s14turbosilvia
04-15-2006, 10:39 AM
All wiring is in tact. It was a complete car when I bought it and since have done nothing bad to it besides pull a dying KA24DE out of it.
komedy
04-16-2006, 05:54 PM
is the intercooler included in the pic?
s14turbosilvia
04-16-2006, 06:27 PM
is the intercooler included in the pic?


Read my initial post please...hell, I even put it in all CAPS.
sonny
04-16-2006, 11:27 PM
What the hell...want tires too?

For an extra $150, I'll throw in (4) Bridgestone Potenza pole position S-03's (research them, $800 a set) sized 245/45 R17.
And (2) BFG drag radials sized 255/50 R16 IIRC, perfect for 300Z turbo wheels!

Also want to include that I do have the KA24DE motor with 5spd transmission that I will include for free. It will require a rebuild for bad rod bearings, but I don't need it so why not?

I will be taking more pictures this weekend of the interior to show just how good of condition this car is in!

That's kinda what I'm looking for, if I can sell my 200sx first. ;)
chunkyman546
04-17-2006, 02:14 AM
You have a PM