PDA

View Full Version : Kouki Conversion


chieu
03-29-2006, 07:27 PM
Hey, i was reading alot of post and i want to know what is the cheapest way to do the conversion, like in parts what parts do i absolutely need and parts that i can live without. i was reading SimpleS14 post on 240sxforums and he stuck a list of parts. i just want to know what parts i really need to do the conversion.

SimpleS14 List Of Parts

(R)Head Lamp Assembly: 26010-81F25 - $205.95
(L)Head Lamp Assembly: 26010-81F25 - $205.95

(R)Park Lamp Assembly: 26170-81F25 - $47.23
(L)Park Lamp Assembly: 26175-81F25 - $47.23

(R)Fender w/o side spoiler: F3100-80F30 - $237.08
(L)Fender w/o side spoiler: F3101-80F30 - $237.08

Grille Assy.: 62310-81F25 - $144.49

Bumper Cover Assy: F2022-81F25 - $291.48

Bumper Bracket: 62290-80F00 - $84.92

Reinforcement: 62030-81F00 - $199.00

Hood Assembly: F5100-81FCM - $330.80

(R)Stay: 62270-81F00 - $8.92
(L)Stay: 62271-81F00 - $8.92

*(R)Front Fender Liner: 63840-81F00 - $34.24
*(L)Front Fender Liner: 63841-81F00 - $51.78

*(R)Brkt, Bumper Side: 62222-80F00 - $7.73
*(L)Brkt, Bumper Side: 62223-80F00 - $7.73

*(L)Impact Absorber: 62090-81F00 - $133.10

*(2)Bracket, Lamp Support: 62560-80F00 - $133.10

*Seal: 60895-50M01 - $0.64

*Spacer (R/L): 62274-35F10 - $0.29

atom
03-29-2006, 08:47 PM
Things u can toss:
impact absorber
grill
fender liner
reinforcement

Bumper cover can be tossed, get an after market one (cheaper AND better looking).

chmercer
03-29-2006, 10:05 PM
required kouki conversion parts

kouki aero bumper
kouki fender
headlights
corners
done

lol at buying new fender liners

reflexdb
03-29-2006, 10:17 PM
i've actually done the conversion. that write-up is VERY good actually. you're going to need everything on the list except you can use your zenki impact absorber. Also, don't need "bracket, light support" or seal or spacers. zenki fender liners will prob work with kouki bumper, but not with jdm kouki bumper.

03-29-2006, 11:19 PM
looks good, but prices are high...

put those part numbers in here...

http://www.trademotion.com/partlocator/index.cfm?action=multiSearch&siteid=214252

03-30-2006, 12:01 AM
I need to double check this with my list when I get to the office...

I know the Zenki & Kouki upper bumper support is the same.. its # 3 in this image:

http://www.trademotion.com/schematics/images/3/3795015.gif

I need to check this on my system when I get to the office.. I will post an accurate list..

There are a bunch of things that are the same... Ill post a comparison list tomorrow from the office when I have my parts system...

chmercer
03-30-2006, 01:55 AM
zenki and kouki upper retainer are not the same at all.

03-30-2006, 02:01 AM
zenki and kouki upper retainer are not the same at all.

like I said, I am going to go through all the part numbers when I get back into the office in the morning... will post...

03-30-2006, 11:39 AM
Pictured below is the Zenki front end and Kouki Front End... I am not figuring bolts and clips since they are 99% the same or found in your garage...

Section 620 (Fascia Kit Front Bumper etc)

Parts that are DIFFERENT:

62090 - Front Bumper Energy Absorber
62022 - Front Bumper Center Reinforcement
62673P - Front Bumper Side Bracket RH
62674P - Front Bumper Side Bracket LH
62672Q - Front Bumper Side Stay LH
62672Q - Front Bumper Side Stay RH

Front Bumper Bracket is different between the two... It uses different part code numbers so I didnt catch it...

Parts that are THE SAME:

62653F - Front Bumper Spacer

There are some Parts that are Not Used from the Zenki to Kouki: 62671, 62672, and a few other small bits...

Obviously the Front Bumper parts are different :D

Zenki:
http://img.photobucket.com/albums/v461/PerformanceNISMO/Car%20Stuff/s14620a.jpg

Kouki:
http://img.photobucket.com/albums/v461/PerformanceNISMO/Car%20Stuff/s14620b.jpg


Section 625 - Radiator Core Support

Parts that are DIFFERENT:

62523 - Radiator Core Support LH
62522 - Radiator Core Support RH
62560 - Heal Lamp Bracket Assembly

Parts not on Zenki on Kouki:

62568N - Head Lamp Hole Seal RH
62569N - Head Lamp Hole Seal LH


Section 630 - Fender

Fenders are different:
Fender Supports Different:
Front Fender Liners Different:


Thats basicly it...

The Above Parts, Head Lights, Corner Lights, Hood, Front Bumper and you are set...

chieu
03-30-2006, 03:49 PM
thank you all for your help

nrg
03-30-2006, 03:56 PM
My conversion:

Fender: 97-98 USDM left/right $200 used
Hood: 97-98 VIS CF $320
Headlight: 97-98 USDM left/right $182.99 $182.16
Corner/Running Light: 97-98 USDM left/right $38.26 each
Signal/bumper Lights: 97-98 JDM left/right $46.24 each
Aux/Fog Lights: 97-98 JDM left/right (still looking, not really needed)
Grill: 97-98 JDM Kouki K's $114.30
Front Bumper: 97-98 JDM Kouki K's $220.96
Rear Bumper: 97-98 JDM Kouki K's $282.14 (not really needed, i got it to complete the look)
Upper retainer (62290-80F00): $68.78
Lamp bracket: (not really needed, just drill new holes)
bumper reinforcement (62030-81F00): $161.19
bumper side brackets (62222-80F00)(62223-80F00): (zenki works)
stays (62270-81F00)(62271-81F00): $7.63
97-98 washer nozzles: (can live without)
rubber trim on hood: (can live without)
97-98 USDM Kouki Sideskirt: 200 shipped
K's rear valances: (still looking)

TiNMAN
03-31-2006, 12:05 AM
i have fender liners if you need...lol brand new!

95zilvia
04-16-2006, 08:01 PM
FAQ FAQ FAQ.
These posts look handy dandy!