what do you guys with aggressive rear aero do with your exhaust's?

[AN89HATCH]

I have an apexi n1 exhaust, and I just installed my rear aero, and now my exhaust looks to sunken in, what do you guys do to make the muffler flush? do they sell exhaust spacers or somethin, or am I going to have to go to an exhaust shop and have the muffler cut, and a new extender pipe welded on?

[Dousan_PG]

i use custom exhaust
you can get the tip extensions from japan thats what most of my friends did.

but out here we use custom exhaust because its so cheap.

[Sean1978]

I know what this guy would do...
http://www.vinod.com/blog/Article_Images/rubb3.jpg


I'd say have someone weld in an extension

[!Zar!]

Most of the guys I know have the pipe extended.

[DaN_S13]

I used to be able to get exhaust spacers when i was in Japan, but right now i have the Apexi exaust control valve that you bolt in between the pipes and it pushes my exhaust out a little bit more.

[chmercer]

i have custom exhaust also, if you wanna keep your apex catback i say use a tip extender basically just a polished piece of metal you bolt onto your tip to make it look flush.

[95zilvia]

where's that hello kitty exhaust pic when u need it :P

[Ricks15]

order a authentic titanium slide pipe that shit will look sweet:drool:

[lilredstiffy]

Who in the US sells these tip extenders.

Anybody?

[d*star180]

I know what this guy would do...
http://www.vinod.com/blog/Article_Images/rubb3.jpg


I'd say have someone weld in an extension


Is dat wooo woooooooooo!

[AN89HATCH]

I think im going to try to make my own tip extender, the hardest part is wii be trying to find a pipe wide enough. Ill probolly try some muffler shops and see how that turns out.

[sideview_180sx]

do what I did, find an exhaust with an 11.5 inch tip. should stick about 4 inches past URAS style rear aero

[lv-180sx]

where's that hello kitty exhaust pic when u need it :P

http://img489.imageshack.us/img489/82/kittyexhaust4ri.jpg (http://imageshack.us)

http://img471.imageshack.us/img471/3683/0524314vv.jpg (http://imageshack.us)

[S14DB]

Who in the US sells these tip extenders.

Anybody?
any autoparts store in the exhaust aisle.

[lowviscosity]

i have custom exhaust also, if you wanna keep your apex catback i say use a tip extender basically just a polished piece of metal you bolt onto your tip to make it look flush.

Yeah take it to exhaust shop or get a tip.
I got custom exhaust too although raspy at 4500-5000 rpm the sound all around is great! Straight pipe no cat 2.5" all the way back.

[infinitexsound]

go get a tip... the same diameter as ur outlet tip.... have the exhaust shop widen it a little bit so it can fit over ur can tip.... then either have them tack weld it or u can drill a hole and use a nut and bolt to tighten it down.....

[sittinsideways]

I know what this guy would do...
http://www.vinod.com/blog/Article_Images/rubb3.jpg


I'd say have someone weld in an extension

its only 4 decoration. dats it n dats all. woo woooooo!!!!

hahahahaha that was a good laugh

[PoorMans180SX]

Leave the exhaust alone..... who cares if you can't see the big fat can? Apex'i exhausts are sweet, leave it the way it is

[Daniel.]

Leave the exhaust alone..... who cares if you can't see the big fat can? Apex'i exhausts are sweet, leave it the way it is

What about the hot exhaust gasses exiting onto the bumper and all underneath your aero...

[PoorMans180SX]

They shouldn't be that hot if you're not going fast or reving it out, which would push it past the bumper anyways. get one of those metal plates if you're really worried about it. It would look better than a "tip extender"...

[jdm538]

does any one have a pics?

[Dousan_PG]

http://www.uras.co.jp/muffler_image/deguchitan.jpg

from the URAS website

[Johny5]

^^^^^^ been trying to find a us source for those for awhile now! like only 7,900 on yahoo jp auctions, cheap cheap.

[chmercer]

They shouldn't be that hot if you're not going fast or reving it out, which would push it past the bumper anyways. get one of those metal plates if you're really worried about it. It would look better than a "tip extender"...

what the hell are you talking about. also apexi exhausts are crap. thats why you see like 4 threads every week about the mufflers rusting off.

my car makes fire. if my exhaust ended behind my rear bumper, my rear bumper would also have fire. fire bad for fiberglass.

[DoriftoSlut]

what the hell are you talking about. also apexi exhausts are crap. thats why you see like 4 threads every week about the mufflers rusting off.

my car makes fire. if my exhaust ended behind my rear bumper, my rear bumper would also have fire. fire bad for fiberglass.
I've set my fiberglass on fire before. You ain't a real man till you do. IMO.

[PoorMans180SX]

http://www.clubb5.com/features/neuspeed_tour/car3.jpg
http://www.invoauto.co.uk/images/Products/Exhaust/shield-protector.jpg
^^^like that

and if you don't want your muffler to rust off, buy the stainless Evo or a GT-spec!

[chmercer]

everyone knows what it looks like. a piece of aluminum on your bumper isnt going to keep it from catching fire when your exhaust is so sunk that the backside of the fiberglass is black.

[AN89HATCH]

ya my muffler dosnt even come out far enough for me just to put the metal on it like the pics, my exhaust is sunken in like 4 to 5 inches lol

[drifter808]

that must be a huge rear bumper.lol. what kind of bumper is it?

[jookybanana]

ya my muffler dosnt even come out far enough for me just to put the metal on it like the pics, my exhaust is sunken in like 4 to 5 inches lol

what kind of bumper do you have? if you have a hatch with cat back exhaust, the tip should be quite flush, i only thought coupes would have the problem of sunken mufflers, since they are a little longer than hatch
my exhuast was sunk in like 3-4", but i was running a rps13 cat-back on a coupe
so i just got a muffler shop customed it to sit flush

[PoorMans180SX]

alright, alright, so maybe the URAS ones don't look so bad. I was scared of some ebay "fix-it-all" part coming up or something. My bad.