Injector Problem HELP PLEASE!!!

[boostin_sil80]

I just swapped a ca18det into my 240 and everything works but the injectors. I cant get the motor to start because the injectors won't pulse. I can make them pulse manually so I know they are good. I tried my friends ecu but that wasn't it. I have no clue anymore. Please help. Thanks.

[smithers584]

not sure man. one of the functions of the CAS is to control fuel injection, telling the ecu piston position and what not. maybe you dont have good power to your injectors or your missing a ground thats not allowing power to go to them. have you rechecked your wiring to make sure everything is pinned right, if not go from the injectos to the ecu on each pin to make sure. sorry i dont know anything about ca18's, just throwing that out there for ya.

[boostin_sil80]

Thanks for your help i have already traced the wires back to the ecu and they are fine the only wiring that was messed with was where the engine harness plugs into the body harness and the dash harness. i also extended the mafs wires and the power steering wires. thats all.

[boostin_sil80]

Does anybody atleast have any ideas. If so just throw them out here. Thanks

[boosteds13]

Are you using the injector dropping resistor pack?

[boostin_sil80]

Yes I have the dropping resistor hooked up