PDA

View Full Version : Quick horsepower question...

Gutling
03-08-2006, 04:34 AM
What do you guys think this will put out, what have you seen on similar setups. I am trying to see if I would reach my goal without buying more parts lol getting expensive. Motor is still being worked on right now, waiting cams and thats it.
Freshly rebuilt (not even broken in yet) redtop sr20det
Greddy RAS
Peak Performance Valve Springs
apexi headgasket
hks step 1 intake/exhaust cams 264
arp rod bolts
arp headstud kit
garrett gt25r .64 (efficency about 17psi)
megan exhast manifold
3" o2 housing, downpipe, exhaust
3"intake
fmic
enthalpy tuned ecu
550cc injectors
walboro 255
nismo fpr

Ive got all the supporting mods just was trying to list things that would make a diff on hp. so what do yall think? ps trying to reach 300whp
ThatGuy
03-08-2006, 09:24 AM
Put it all on, take it to a dyno, tune it. If you don't make 300hp then you need to buy more. If you do make 300hp, you're set. Just do it!
Gutling
03-08-2006, 04:02 PM
lol thats basically whats going to happen, just curious. are cam gears (greddy/hks) needed with what i got, or just nice to have for timing adjustment?
OJmobileII
03-08-2006, 08:24 PM
not necessary.
Maeda
03-08-2006, 08:49 PM
You'll hit 300.

I might be able to do a bit more but thats a safe estimate.

Good Ruck.
kuramaya
03-08-2006, 08:53 PM
300 easy tune well or lose it all
fliprayzin240sx
03-08-2006, 10:29 PM
ull do more than 300...maybe close to 340. Only thing is try to get somekind of fuel piggyback to fine tune Enthalpys ECU. SAFC will do wonders...
kuramaya
03-09-2006, 12:48 AM
ull do more than 300...maybe close to 340. Only thing is try to get somekind of fuel piggyback to fine tune Enthalpys ECU. SAFC will do wonders...


I didn't see a Z32 on there or does the enthalpy Tune provide a MAP setup? I don;t know jack about Enthalpy, but know that if he is running a MAF setup, he needs a Z32 or better for flow up to his goal.
late
daryl
waynehead05
03-09-2006, 01:51 AM
looks like 320-340 to me. on a fair tune. on a good tune 345ish max. sounds like a good setup.
Gutling
03-09-2006, 03:01 AM
ya sorry, i got a z32 mafs. thank yall, deffinetly have brightened my day lol. But ya its going to get dynoed at low/high boost when the motor is broken in, so ill have dyno sheets up in a few days.