5 Lug Extended Studs?

[sr_sil80]

Anyone know of any good sites/shops that carry ARP extended studs?

Also, anyone know of the part numbers by any chance.

I need S14 studs for the front, w/ them 10-12mm longer than the rear b/c I got a custom 12mm hubcentric spacer made.
and 300ZX rear hub studs.

I noticed the sites that carry these have mutliple fitment options:

Wheel Stud Style: Press-in, Screw-in
Thread Size: 12mm x 1.50 RH, 1/2-20 RH in., 7/16-20 RH in.
Knurl Diameter: 0.485, 0.509, 0.486, 0.580, 0.625, 0.680, 0.568, 0.618
Underhead Length : (in)1.850, 2.850, 3.165, 3.200, 3.500, 3.470, 3.125, 2.970, 3.050, 2.500, 3.250
Knurl Length: (in)0.275, 0.400, 0.315, 0.420, 0.300, 0.710, 0.800

Or any other recommended studs to use???

[jedc]

I used the arp #100-7708 back when I was 4-lug on my s13. These will only work on s13 hubs and s14/z32 rear hubs. All I know of for the s14 front hubs is gonna be nismo, which are way more expensive than arp. The arp's can be had from summit racing for about $15.

[Xren17]

I had picked up a set of 60mm nismo studs from performance nissan in duarte. I think they were going to $60 for a set of 10.

[nsn240]

I used the arp #100-7708 back when I was 4-lug on my s13. These will only work on s13 hubs and s14/z32 rear hubs. All I know of for the s14 front hubs is gonna be nismo, which are way more expensive than arp. The arp's can be had from summit racing for about $15.

doesnt say nissan on summit, you just went by the sizes? just wondering

[infinitexsound]

all u need is a micrometer and start measuring the stock ones ... and basically look at the list that arp offers.. and pick the right one...

[[email protected]]

S14 you need 14.3mm knurl diameter

S13 its 14.3mm knurl on the front and 13.0mm on the rear if I remember correctly... I have to double check!

NISMO Hub Bolts PM for Forum Pricing... (http://performancenissanparts.com/catalog/advanced_search_result.php?keywords=nismo+hub+bolt s&osCsid=5c19baa94f12c71a34a6482425fdad55&x=0&y=0)

This maybe usefull?

http://img.photobucket.com/albums/v461/PerformanceNISMO/Car%20Stuff/hubboltschool.jpg

[chmercer]

nismos are junk. go with arp

[RiceEata]

S14 you need 14.3mm knurl diameter

S13 its 14.3mm knurl on the front and 13.0mm on the rear if I remember correctly... I have to double check!

NISMO Hub Bolts PM for Forum Pricing... (http://performancenissanparts.com/catalog/advanced_search_result.php?keywords=nismo+hub+bolt s&osCsid=5c19baa94f12c71a34a6482425fdad55&x=0&y=0)

This maybe usefull?


Check the misc section on pdm-racing.com , I think only s14 front is different size...s13 front, rear and s14 rear is the same (arp 100-7708).

[[email protected]]

I just went and took a look at the S14 hubs...

S14 = 14.3mm Knurl Front / 13.0mm Knurl Rear (for 5 lug hubs atleast)
Z32 = 14.3mm Knurl Front & Rear

[BlackZenkiS14]

I just wanted to thank [email protected] for making the posts in this thread that he did. Answered all the questions i was searching for. Thank you! :bow: :2f2f:

[lilredstiffy]

Peak Performance also makes a tough s14 front sized stud

http://www.store.yahoo.com/phase2motorsports/pepe60lowhst.html

[[email protected]]

Thanks BlackZenkiS14!

I am in the process of building our new web site... Its going to have alot more detailed product info too!

[AWDtoyota]

What about the lug nuts for extended studs?

What are some good ones? Do they have any type of locks? Where can you get them?

[[email protected]]

Its all the same as far as lug nuts and locks...

you can use your existing ones as long as you do not have too much open threads left... like if you use a really small spacer or no spacer at all with a 60mm hub bolt... in that case you will need Open ended lug nuts...

we have many types of differing lug nuts and lock sets available that work with standard hub or even longer hub bolts

[[email protected]]

update to this thread...

300ZX NA Rear Hubs from production dates of 2/89-9/91 use 13.0mm knurl hub bolts... the Z32 TT and NA 93-UP use 14.3 all around...

[CrazyIvan]

I got mine from projectnissan.com
they are pretty cool people :)

[Slidin240Wayz]

Moroso makes them for the front. Search on summit racing, they are like .1 mm off, but they work.

[240trainee]

http://store.summitracing.com/partdetail.asp?autofilter=1&part=MOR%2D46220&N=4294863804+4294779980+115&autoview=sku

How bout these, .563 mm knurl, thats like 14.3002 mm. would have to use different lug nuts though.

[Slidin240Wayz]

Nismo and ARP are different threads.

[trsilvias13]

anyone got the arp parts #? front s14 and rear s14?

[sr_sil80]

update to this thread...

300ZX NA Rear Hubs from production dates of 2/89-9/91 use 13.0mm knurl hub bolts... the Z32 TT and NA 93-UP use 14.3 all around...

Haha,....That would've saved me a lot of time/trouble.

Thanks for all your help though Jason!
(I actually needed the shorter ones, but it's cool...I'll guess I'll just have to get used to the long ones, as I spot welded them in for extra support :) )

[airsoft]

What about S15 hubs?

14.3? front / rear?

Thanks

[xplicit240]

S14 Front - ARP 100-7717 - ARP Wheel Studs - Overview - SummitRacing.com (http://www.summitracing.com/parts/ARP-100-7717/) which are ARP. these are the same for ichiba hubs. but you will have to use honda pitch threads of 1.5

if you want to use the stock lug nuts you have to get the wrx. mine are 3" long lol.