Possably for sale... Riken Mesh 4 lug

[BlackSilEighty]

Just wanting to see what I could get out of a pair (2) of 15x6 +35 Riken mesh wheels. 4x100 pattern (need to buy a pair of 4x114.3 to 4x100 adapters in order to put on a 240SX). They have (2) Nitto NT450 195-50-15 tires on them with roughly 85-90% tread left. Tires were brand new. I traded some stuff for the wheels to use as a backup pair for drifting, flat tires etc... I drifted on them for one event (used as front wheels) so about 10% of the tread was worn off. They are still very usable and have much tread left. They still smell new.

http://photos-911.facebook.com/n10/41/7/52701294/n52701294_30122911_4890.jpg

The wheels have some small bends and curb marks on them but still hold air and don't wobble. Black with a polished lip. Lip is about 1.5 inches deep but because the offset is +35 only 1/3 of an inch of the lip is sticking outwards. No center caps. The tires pictured are not what is on them now...

[clutch kick drifter]

Man those are sOOO JDM TYTE DU. You got Da Messhheezzz. JK. Great wheels though Nate. SOmeone buy these sum bitches.

[mistaanime]

try honda fourms..

[BlackSilEighty]

I think I'm gonna keep em. Unless I get a good offer. I painted them gold today :). Looks real JDM tyte yo!

[johngriff]

If you are in SoCal and not "none of your beeswax", i can get you some resources to get them computer redrilled to 4x114.3. I have had a set of rikens redrilled from 4x100 to 4x114.3 and the worked great, no problems and very safe. If you are give me ring, using spacers sounds a little extreme for a +35 x 6.

john
714 493 0293

[BlackSilEighty]

+35 with 30mm spacers is too extreme???? How so???? It fits almost perfectly flush. My wheels that were stolen were 15x7.5" +29 with 30mm spacers and they stuck out about 1/2 an inch and looked awesome with a little fender roll. You do realize that the higher the number of offset the less it sticks out right?

Unless you can weld the 4x100 holes shut and redrill above them then these can't be ridrilled. The adjacent area where you would drill the 114.3 holes is hollow and would collapse if drilled.

[struka]

i'll give u 5 bucks for it

[BlackSilEighty]

Make it $5.01 and you've got a deal! I'll probably keep them to use as fronts in case I go to more events. These tires performed pretty well as fronts.