Where to buy Nismo LMGT4s in LOW offsets?

[Siizzzoooo]

I saw a set of 18x9.5 +12 and fell in love with them all over again :fawkd:

I would like to get something more along the lines of 18x9.5 +5

:bigok:

[KiDyNomiTe]

I saw a set of 18x9.5 +12 and fell in love with them all over again :fawkd:

I would like to get something more along the lines of 18x9.5 +5

:bigok:
Do they come in custom offsets?

AFAIK they are similar in size to TE37s and in that case +12 is probably the lowest, but I think that fancy 500hp skyline has lower offsets.

[Dousan_PG]

aspec should be able to get them thru mackin
expect 3-6 month wait on average though.

[sideview_180sx]

They do not come in custom offsets IIRC. Don't stop at 9.5, man up and go 18 x 10.5 +12

[anthony240]

18x9.5 +12, +30, +38
18x10.5 +15

or, 19s have a high gloss look to the wheels, and polished lips too, but still one piece forged:

19x9.5 +12, +20, +25, +28, +30, +40
19x10.5 +15, +30, +38

very tasty :yum:

[FRpilot]

yes they are hawt! i want a set of gloss black myself but i think they are discontinued in that color unless you can get custom colors. i toyed with the idea of getting a set of bronze ones and getting them powdercoated but ppl will own me for powdercoating a set of bronze ones so maybe ill go with a set of silver ones to powdercoat. but this is later in life when i can afford msrp 700/per wheel

[Dousan_PG]

msrp? hehehe whats that :p

just special order them and wait
it will be a joyous day 5 months later when they arrive
and possibly the place u order it from wll require a non refundable deposit and you pay the rest on arrival..so technically if you dont fuck up you can order them w/o all the cash and pay for them when they arrive a few months later....thats a good way to go, imo

[exitspeed]

18x9.5 +12, +30, +38
18x10.5 +15

or, 19s have a high gloss look to the wheels, and polished lips too, but still one piece forged:

19x9.5 +12, +20, +25, +28, +30, +40
19x10.5 +15, +30, +38

very tasty :yum:

Man those are some weak sizes :wackit:

[kouki_s14]

i wanna see pictures of these low offsets!

[FRpilot]

Man those are some weak sizes :wackit:

not that bad with the lower offsets. how many people run negative offsets anywho?

[Dousan_PG]

few
and the ones who do usually have tons of camber like a moron

good sizes for mild pulls as well as wide fenders and stock fenders

the people who run neg offsets arent usually driving s chassis cars...thas some vip shit usually.

and if i was running a spoked wheel like this in a neg shoot me in the face. should be running something like AGLE MINERVAs or VS KFs and such...

[DoriftoSlut]

Or Equips. I run negative offsets. How about you go lay down because I punched you in the face?

[A Spec Products]

aspec should be able to get them thru mackin
expect 3-6 month wait on average though.

one of the only rays wheels i CANT get

gotta go to a nismo dealer, they have exclusive on that wheel specifically

hit up tony @ performance nissan, or i think jason is on this board message him

or just give revat619 a offer he cant refuse...hes got 18x9/10 iirc? sick lookin :)

[sideview_180sx]

Jay will never leave those wheels, unless you offer up some agle minervas as well haha. I know. Logan I offered him $$$. Or offer him a super rich white chick who has mad political connections in SD, haha.


Off Topic:::I need another car!

[Siizzzoooo]

so I checked and they're like $8XX each wheels :eek: !!

[jobestudios]

Befreind someone who works at a nissan dealership, we get a nice discount there :)

[anthony240]

aight, i'll be good,

http://www.gruppe-s.com/Nismo/nismolmgt4.htm

better pricing than Nissan dealer. I don't know if they can still get the wheels.

[infinitexsound]

Nice anthony... thanks for holding out u bum.... j/k

[axiomatik]

holding out? google 'nismo lmgt4' and it's the SECOND result, you can't find it any easier.

[revat619]

Jay will never leave those wheels, unless you offer up some agle minervas as well haha. I know. Logan I offered him $$$. Or offer him a super rich white chick who has mad political connections in SD, haha.


Off Topic:::I need another car!


ROFLMAO!!! Where da white women at?! hahahahahahaha

You and logan are both right though! I'll never sell them unless i get an offer i cant refuse or a pimptastic set of AGLE MINERVAS. OMG SO HOT.


In all seriousness though,

Siz, i was gonna shoot you a pm earlier today, but i got hella busy at work. But as you can see they're pretty pricey. Fwiw, that pricing on gruppe-s is good, but dont forget those prices dont factor in costs for shipping. The low offset sizes arent stocked here AT ALL, so you're gonna pay a lot more than that when all is said and done. Realistically you're looking at the mid to upper 2k's for the set.

[infinitexsound]

holding out? google 'nismo lmgt4' and it's the SECOND result, you can't find it any easier.

its kinda a sarcasm undercover joke between me and anthony... i appreciate that u clarified where i should look.... ill thank u later...

[[email protected]]

well... The issue with LMGT4's out side of the 18/19x9.5 +30mm / 18/19x8.5 +25 is how they are brought in through Nissan USA...

The above sizes are available through any NISSAN PDC (Parts Distribution Center) to all NISSAN Dealers as a regular Factory Part.

The other sizes which you find in the NISMO JAPAN Catalog / Market can not be brought in through just any ol NISSAN dealer... They can get them, but not through the standard PDC Parts ordering method... So, they are more expensive...

Example...

NISMO Exhaust for 350Z. When we purchase it through NISSAN USA PDC we can sell it at $880.

NISMO Exhaust for 350Z. When we purchase the same exact part number from NISMO Japan, it COSTS us about $1600 to bring it in!

With the LMGT4's its the same... We have brought some in before...

Most of the time when we bring over NISSAN Japan parts we air freight them in... For heavier items we go by boat...

By boat I can get the wheels at a reasonable price, but it is still going to be more then the Volk TE37 and definatly more then the Readly available LMGT4's through PDC...

just a FYI on how the Nissan parts world works...

for what its worth :-/

[koukidough]

as hot and expensive as they look you would have thought it is powder coated. I want them too but in silver and powder coat them gunmetal:)

[[email protected]]

True that :) I powdercoated my LMGT4's black... Ive also done a few sets in Gunmetal for customers...

http://img.photobucket.com/albums/v461/PerformanceNISMO/Car%20Stuff/IMG_3672.jpg

http://img.photobucket.com/albums/v461/PerformanceNISMO/JasonZ33/IMG_3503.jpg

[FRpilot]

so i guess its a 750-800 wheel...

[rainier]

does anyone do powdercoating? i wanna get my ROTA p45fs powerdercoated. haha

[m072514]

damn... i wish i could afford LMGT4s... but each wheels costs more than all 4 of the ones im gonna get!

[Siizzzoooo]

best price I got was $2400 or $2600 I cant remember, but I didn't want to wait

[chmercer]

theres some 18x9.5 +38s on UG for ~500 +sh, ebay a bronze 350z size set (8.5 front ugh) for 1600 buy it now.

gt2s are cooler anyway

http://www.upgarage.com/upgarage/gazou/0603/0603146003142/0603146003142s0.jpg

[scir16v]

GT-3's ftw. They actually have lip.http://www.upgarage.com/upgarage/gazou/0602/0602138003757/0602138003757s0.jpg

[koukidough]

GT-3's ftw. They actually have lip.http://www.upgarage.com/upgarage/gazou/0602/0602138003757/0602138003757s0.jpg
wow gt-3's are nice i will look into that;)

[EchoOfSilence]

this is really not available in 17's or smaller? i swore i saw them in 16, guess not

[[email protected]]

this is really not available in 17's or smaller? i swore i saw them in 16, guess not

LMGT4:

17x7.5 - 9.5
18x7.5 - 10.5
19x8.5 - 9.5 though some 10.5's were made limited...

18x10.0 +20mm LM GT MAG

MM8 8 spoke wheel for the March in 15x6 4x100


In the JDM NISMO catalog, they recommend for the S14:

17or18x8.5 +30 225/40/17or18
17or18x9.5 +38 255/35/17or18

:-/

The LMGT4's I can do under 1.9K are 18x8.5 +25 / 18x9.5 +30

[scir16v]

If you go to www.japanparts.com you can get alot of sizes in the gt4.

Like
16x7 +38
17x9.5 +12
18x9.5 +12

[EchoOfSilence]

japanparts' prices seem too good to be true.
jason, ca n you confirm that they were actually made in 16's?

[[email protected]]

Its shipping that kills it... The previous times I have brought in special order sizes (mainly 19's) I had them air freighted... That made the selling price around $3200... Now that the 19" LMGT4's are avaialble from NISSAN USA, I can sell them much cheaper...

if you get a shipping quote from Japan Parts it will add around $200 ish per wheel... I am going to work on getting pricing for the wheels shipped by boat and see what I can get done...

Ill check my older NISMO Catalogs and see if anything.. I only have my 05 at home...

[chmercer]

dude they have 16s of them in japan. 100%. rays can make whatever they want.

how are japanparts prices too good to be true? its like 2100$ for a set of 16" wheels shipped. thats the worst deal ever.