S14 5 speed swap ?'s - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

babyjesus · 07-16-2013, 09:07 AM

^^^lol I was gonna say that it looks like a solid place to start. the body looks straight for the most part which is more than i can say for a good portion of 240's out there. And jr ss is right (again) in that its not THAT old. in fact I bought by first s14 (like 08) liking it for the reason that it felt new.

sleepyS14se · 07-16-2013, 10:11 AM

Quote:

Originally Posted by jr_ss

1. It's not THAT old.
2. It's missing a bumper, grill, lights and your rear bumper is hanging off.
3. It's multi colored and dirty as shit.
4. It doesn't run, nor have a motor in it.
5. Clean it up, make it run and it won't appear to be a POS.
6. Converted Honda owners....

Comments made should be take as opinions. Don't get butt hurt based on my evaluation. Make it run, clean it up and I'm sure it'll be a nice car.

front end is complete and looks great. i put the bumper on and the lights...

i havent been able to wash it because there is no water hose near the car

it does have a broken ka24 in it...which im replacing obviously...

the rear bumper has a broken hole that i have to fix so i can put a pop in christmas tree in to hold it. keep in mind i do have a whole willow pearl gold 240sx spare car too...

Rich260z · 07-16-2013, 10:25 AM

Not sure if your a troll or not, but I'm amazed at the amount of info people are giving you right off the bat instead of the usual flame on approach.

sleepyS14se · 07-16-2013, 10:38 AM

Quote:

Originally Posted by Rich260z

Not sure if your a troll or not, but I'm amazed at the amount of info people are giving you right off the bat instead of the usual flame on approach.

no i am not a troll...

the reason they are helping me is because i am a very widely known throughout honda forums/communities and i am just trying to get into s chassis cars. I need good info and obviously i have nice friendly zilvians here helping me decide on what to do and what to buy etc...i am the first to admit i am lost as hell and need some good guidance on how to spend money appropriately instead of buying the same things twice yada yada yada.....

once again i appreicate those who are helping me...sorry my 240 isn't the best but it is all i got to work with and i plan on making it very nice.

I have already done 2 transactions here on zilivia where i found some cool people with even cooler prices so i jumped on em...im no troll bud

drftngs14 · 07-16-2013, 01:14 PM

Did you see the car I posted?!?! Thats my POS, plenty of us start like that and work our ways up, just dont ask for opinions often ahaha.. Honestly, everyone is right get the car running and driveable first, plenty of unknown things will pop up during that process, trust me/us! Once that happens start investing in the basics and work your way up. Looks like a decent chassis, take your time, research, upgrade where it makes sense, research, drive and learn, research and mod.. oh and research! Im lucky enough to have a job I work online, so everyday, all day Im reading..

sleepyS14se · 07-16-2013, 03:16 PM

ok i just bought a complete front brake setup from a q45.... cost me 40 bucks from walsh nissan dealer across the street from me... the owner of the nissan dealer and honda place own the company i work at so i get insanely cheap prices...

(i bought the q45 setup from the parts mgr over there and he said its everything i need to put them on my 5 lug s14

Link · 07-16-2013, 04:19 PM

im doing a 5spd swap on my s13 soon. im collecting all the parts. finding it hard to find a pedal assembly, driveshaft, and flywheel that isnt $300.

sleepyS14se · 07-17-2013, 06:45 AM

i found s13 pedals on ebay for 75

i ended up buying s14 ones for my s14 for 100 from thaialnd

sleepyS14se · 07-17-2013, 12:42 PM

got my 5spd x member today, just waitin on the pedal assys

sleepyS14se · 07-18-2013, 07:23 AM

Nissan 240sx - 5 Speed Swap - Enjuku Racing Parts, LLC

the first 2 lines they show... do i need both?? one looks long and the other looks short... what one do i need or both??

sleepyS14se · 07-18-2013, 09:18 AM

nevermind i see now the long one goes directly from cmc to csc

xoxide · 07-18-2013, 09:22 AM

Do yourself a favor and spend the extra money on a good clutch line... I bought the Isis one and it leaked straight out of the box.
Chase Bays Clutch Line - Nissan 240sx - Enjuku Racing Parts, LLC

If not, just go buy a solid brake line with fittings already on it from autozone... Works just fine and is like $3 compared to $30-60

sleepyS14se · 07-18-2013, 09:52 AM

i wanna just buy one so its simpler on me i ordered the chasebays

ronny.jpn · 07-19-2013, 03:52 AM

You needed an entire thread for a 5 speed swap? Its really not that hard, not even the first time

sleepyS14se · 07-19-2013, 06:30 AM

Quote:

Originally Posted by sloazz40

You needed an entire thread for a 5 speed swap? Its really not that hard, not even the first time

hell yeah

sleepyS14se · 07-19-2013, 01:02 PM

for the 240sx/ka24de i got these items today
water pump
v/c set
front crank seal
rear main
exedy normal clutch
chasebays clutch line
circuit sports shifter solid bushing
isis short shifter assy
circuit sports SS brakelines all the way around
oem nissan nabco CMC
rear extension housing seal/tailshaft seal
new pads n rotors for my q45 front conversion

next on my order list is the Powered by Max coilovers...

i am excited

My wife said i am a fckin idiot for the fact im gonna spend 1100 on coilovers... she doesn't know how important they are.

Link · 07-19-2013, 01:07 PM

Quote:

Originally Posted by xoxide

Do yourself a favor and spend the extra money on a good clutch line... I bought the Isis one and it leaked straight out of the box.
Chase Bays Clutch Line - Nissan 240sx - Enjuku Racing Parts, LLC

If not, just go buy a solid brake line with fittings already on it from autozone... Works just fine and is like $3 compared to $30-60

i just bought the isis one. is it no good? -__-

ronny.jpn · 07-19-2013, 01:11 PM

Quote:

Originally Posted by Link

i just bought the isis one. is it no good? -__-

It sucks. The isis one always leaks. I have the agency power. I like it.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Rich260z · 07-19-2013, 01:33 PM

Quote:

Originally Posted by sleepyS14se

My wife said i am a fckin idiot for the fact im gonna spend 1100 on coilovers... she doesn't know how important they are.

This is an amazing quote

sleepyS14se · 07-19-2013, 02:17 PM

Quote:

Originally Posted by xoxide

Do yourself a favor and spend the extra money on a good clutch line... I bought the Isis one and it leaked straight out of the box.
Chase Bays Clutch Line - Nissan 240sx - Enjuku Racing Parts, LLC

If not, just go buy a solid brake line with fittings already on it from autozone... Works just fine and is like $3 compared to $30-60

this was enough for me to say F the isis line and get chasebays, no brainer..lol

Quote:

Originally Posted by Link

i just bought the isis one. is it no good? -__-

i would cancel the order and go to enjukuracing.com and order the chasebays one...its like 20 bucks more

Quote:

Originally Posted by sloazz40

It sucks. The isis one always leaks. I have the agency power. I like it.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

i have read good things about agency power parts, i had a cat delete from them on a ol rx8 i had and it was good... and in general i read good things about agency, so i would say agency is a good brand to go with

Quote:

Originally Posted by Rich260z

This is an amazing quote

thank you sir... my wife does make some very funny comments but i love her to death but damn, lol..

in reality a 1100 dollar set of coilovers is actually cheap..some of them cost like 2900 zomg lolz

jr_ss · 07-19-2013, 03:15 PM

Quote:

Originally Posted by sleepyS14se

in reality a 1100 dollar set of coilovers is actually cheap..some of them cost like 2900 zomg lolz

Just to put this in perspective for you, 4yrs ago I paid $1575 shipped for a set of KW V3 coilovers. This is high quality stuff that is designed to make your car go fast around a track if you know what you're doing. They aren't designed to drag the metaphorical 240sx dick in the dirt, but they ride great and do everything I ask of and more, WITHOUT sacrificing ride quality when and where I want it.

sleepyS14se · 07-20-2013, 08:11 PM

enjukuracing.com

can someone point out which subframe bushings i need? i am confused because some look different than others and I am looking to replace the bushings that hold the rear subframe to the chassis and the bushings where the front subframe go to the chassis...

which ones are they??

ronny.jpn · 07-20-2013, 08:19 PM

Quote:

Originally Posted by sleepyS14se

enjukuracing.com

can someone point out which SUBFRAME BUSHINGS I need? i am confused because some look different than others and I am looking to replace the bushings that hold the rear subframe to the chassis and the bushings where the front subframe go to the chassis...

which ones are they??

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

sleepyS14se · 07-22-2013, 10:16 AM

Quote:

Originally Posted by sleepyS14se

enjukuracing.com

can someone point out which subframe bushings i need? i am confused because some look different than others and I am looking to replace the bushings that hold the rear subframe to the chassis and the bushings where the front subframe go to the chassis...

which ones are they??

trying to order solid subframe bushings but i am confused on which set is for front and what is for the rear

jr_ss · 07-22-2013, 10:51 AM

There are no bushings for the front subframe...

sleepyS14se · 07-22-2013, 12:49 PM

ok so what would be replaced on the front then? i thought the front sub mounted to the car with bushings too...

anyways.. i got so much stuff coming in the mail thru frsport.com and chasebays and enjuku racing...i can't wait!

my exedy clutch came today

sleepyS14se · 07-22-2013, 12:52 PM

Am i reading this correct?? energy suspension brand rear subframe bushings require the original shell outer to stay in in order for these to fit properly?? from my understanding the old ones must be burned and knocked out and then clean it up really good yet Leave the outer original bushing shell IN the subframe while installing these ES bushings

this sounds so ass backwards..i think the whole bushing should be remove.d.

Rich260z · 07-22-2013, 12:58 PM

There are 4 main bushings for the rear subframe, the front crossmember is bolted directly to the frame rails. There are two front control arm bushings though. Also the energy suspension bushigns take place of the rubber part, not the metal shell.

Metal, unlike rubber does not dry up and shrink. Front control arm bushings are like this as well

sleepyS14se · 07-22-2013, 01:39 PM

so burn them old ones out and leave the shell intact??!

ronny.jpn · 07-22-2013, 02:11 PM

Quote:

Originally Posted by sleepyS14se

so burn them old ones out and leave the shell intact??!

Drop the the subframe, dude....

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

07-16-2013, 09:07 AM	#61
babyjesus Zilvia Addict Join Date: Dec 2008 Location: moreno valley Posts: 716 Trader Rating: (14) Feedback Score: 14 reviews	^^^lol I was gonna say that it looks like a solid place to start. the body looks straight for the most part which is more than i can say for a good portion of 240's out there. And jr ss is right (again) in that its not THAT old. in fact I bought by first s14 (like 08) liking it for the reason that it felt new. __________________ thelittlebigblock.blogspot.com

07-16-2013, 03:16 PM	#66
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	ok i just bought a complete front brake setup from a q45.... cost me 40 bucks from walsh nissan dealer across the street from me... the owner of the nissan dealer and honda place own the company i work at so i get insanely cheap prices... (i bought the q45 setup from the parts mgr over there and he said its everything i need to put them on my 5 lug s14 __________________ 95 S14 se RB25DET 348whp

07-17-2013, 06:45 AM	#68
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	i found s13 pedals on ebay for 75 i ended up buying s14 ones for my s14 for 100 from thaialnd __________________ 95 S14 se RB25DET 348whp

07-17-2013, 12:42 PM	#69
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	got my 5spd x member today, just waitin on the pedal assys __________________ 95 S14 se RB25DET 348whp

07-18-2013, 07:23 AM	#70
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	Nissan 240sx - 5 Speed Swap - Enjuku Racing Parts, LLC the first 2 lines they show... do i need both?? one looks long and the other looks short... what one do i need or both?? __________________ 95 S14 se RB25DET 348whp

07-16-2013, 10:25 AM	#63
Rich260z Zilvia Addict Join Date: Apr 2011 Location: Burbank, CA Posts: 621 Trader Rating: (8) Feedback Score: 8 reviews	Not sure if your a troll or not, but I'm amazed at the amount of info people are giving you right off the bat instead of the usual flame on approach.

07-16-2013, 01:14 PM	#65
drftngs14 Leaky Injector Join Date: Mar 2013 Location: Charlotte, NC Age: 35 Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	Did you see the car I posted?!?! Thats my POS, plenty of us start like that and work our ways up, just dont ask for opinions often ahaha.. Honestly, everyone is right get the car running and driveable first, plenty of unknown things will pop up during that process, trust me/us! Once that happens start investing in the basics and work your way up. Looks like a decent chassis, take your time, research, upgrade where it makes sense, research, drive and learn, research and mod.. oh and research! Im lucky enough to have a job I work online, so everyday, all day Im reading..

07-16-2013, 04:19 PM	#67
Link Leaky Injector Join Date: Oct 2012 Location: New Jersey Age: 31 Posts: 86 Trader Rating: (1) Feedback Score: 1 reviews	im doing a 5spd swap on my s13 soon. im collecting all the parts. finding it hard to find a pedal assembly, driveshaft, and flywheel that isnt $300.

07-18-2013, 09:18 AM	#71
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	nevermind i see now the long one goes directly from cmc to csc __________________ 95 S14 se RB25DET 348whp

07-18-2013, 09:22 AM	#72
xoxide Post Whore! Join Date: May 2010 Location: Jacksonville Posts: 2,807 Trader Rating: (21) Feedback Score: 21 reviews	Do yourself a favor and spend the extra money on a good clutch line... I bought the Isis one and it leaked straight out of the box. Chase Bays Clutch Line - Nissan 240sx - Enjuku Racing Parts, LLC If not, just go buy a solid brake line with fittings already on it from autozone... Works just fine and is like $3 compared to $30-60

07-18-2013, 09:52 AM	#73
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	i wanna just buy one so its simpler on me i ordered the chasebays __________________ 95 S14 se RB25DET 348whp

07-19-2013, 03:52 AM	#74
ronny.jpn Zilvia Junkie Join Date: Apr 2012 Location: Mobile, Al Age: 26 Posts: 325 Trader Rating: (0) Feedback Score: 0 reviews	You needed an entire thread for a 5 speed swap? Its really not that hard, not even the first time

07-19-2013, 01:02 PM	#76
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	for the 240sx/ka24de i got these items today water pump v/c set front crank seal rear main exedy normal clutch chasebays clutch line circuit sports shifter solid bushing isis short shifter assy circuit sports SS brakelines all the way around oem nissan nabco CMC rear extension housing seal/tailshaft seal new pads n rotors for my q45 front conversion next on my order list is the Powered by Max coilovers... i am excited My wife said i am a fckin idiot for the fact im gonna spend 1100 on coilovers... she doesn't know how important they are. __________________ 95 S14 se RB25DET 348whp

07-20-2013, 08:11 PM	#82
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	enjukuracing.com can someone point out which subframe bushings i need? i am confused because some look different than others and I am looking to replace the bushings that hold the rear subframe to the chassis and the bushings where the front subframe go to the chassis... which ones are they?? __________________ 95 S14 se RB25DET 348whp

07-22-2013, 10:51 AM	#85
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,052 Trader Rating: (34) Feedback Score: 34 reviews	There are no bushings for the front subframe... __________________ My SR20VET

07-22-2013, 12:49 PM	#86
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	ok so what would be replaced on the front then? i thought the front sub mounted to the car with bushings too... anyways.. i got so much stuff coming in the mail thru frsport.com and chasebays and enjuku racing...i can't wait! my exedy clutch came today __________________ 95 S14 se RB25DET 348whp

07-22-2013, 12:52 PM	#87
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	Am i reading this correct?? energy suspension brand rear subframe bushings require the original shell outer to stay in in order for these to fit properly?? from my understanding the old ones must be burned and knocked out and then clean it up really good yet Leave the outer original bushing shell IN the subframe while installing these ES bushings this sounds so ass backwards..i think the whole bushing should be remove.d. __________________ 95 S14 se RB25DET 348whp

07-22-2013, 12:58 PM	#88
Rich260z Zilvia Addict Join Date: Apr 2011 Location: Burbank, CA Posts: 621 Trader Rating: (8) Feedback Score: 8 reviews	There are 4 main bushings for the rear subframe, the front crossmember is bolted directly to the frame rails. There are two front control arm bushings though. Also the energy suspension bushigns take place of the rubber part, not the metal shell. Metal, unlike rubber does not dry up and shrink. Front control arm bushings are like this as well

07-22-2013, 01:39 PM	#89
sleepyS14se Zilvia Addict Join Date: Jul 2013 Location: Georgia Age: 32 Posts: 880 Trader Rating: (3) Feedback Score: 3 reviews	so burn them old ones out and leave the shell intact??! __________________ 95 S14 se RB25DET 348whp

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode