FaLKoN240

Just wondering how you guys secured the side skirts?

I noticed the mounting holes in the rear do not line up on my kouki wheel wells at all.

Should I drill them?

__________________

Best way to do business with me? Make your best offer FIRST.

fliprayzin240sx

I did.....

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

SilviaSR20DET

3m outdoor tape, drill the rears and use oem screws for the front (the ones that were used for your fender lining). Mine holds up great.

jr_ss

I made plates for mine out of some aluminum flat stock and rivnuts for the rear to use the OE holes. Like the others have said, you can use some self tapping screws to secure them. I also used said rivnuts to attach the lower brackets to the body with the OE holes at the front for the fender liners.

__________________
My SR20VET

FaLKoN240

If you guys could post pics that would be great.

__________________

Best way to do business with me? Make your best offer FIRST.

jr_ss

Here:

__________________
My SR20VET

Malik

~ informative ~

DreamN

Rear side skirts on all s-chassis seem to mount with brackets that pretty sandwich the fender wall. I did something similar to what jr_ss did with my S13 skirts.

__________________
- Jimmy

Wanted:
TBD

For Sale:
TBD

eek

Yup, its the same clip used on the rear oem valences and the kouki side skirts. Its been awhile but I remember you can order them from dealer.
You need #4 in the picture. 1 for each side. They are like $2.00 each.

crozzover69

Mind spoon feeding us the Nissan PN for this? I was actually looking into securing the rear part of my Type X Sideskirts as well. This seems like a viable option

Agamemnon

01241-00841

DIENOW

Was so excited to see this, till i saw the price for shipping was (on most sites) about $12.00 to me!

Anyone know a place where i can also get these, but not pay such a lame price for shipping?

crozzover69

Sweet! Thank you sir

DreamN

local dealer?

__________________
- Jimmy

Wanted:
TBD

For Sale:
TBD

DIENOW

will go tomorrow...lol.

Agamemnon

I have these j clips on order. I'll post pics when they come in.

FaLKoN240

What all did you guys buy? My car is an SE, but I have none of the OEM hardware. I was gonna buy all of it. I assume it's like $100 per side

__________________

Best way to do business with me? Make your best offer FIRST.

eek

Well you assumed before you actually looked... Anyhow its not that expensive, you can go to your local dealer and order the parts. I have a base model and I just used the clips and screws from the dealer along with 2x tape after cleaning both surfaces very well.

You can use rivnuts or which ever way you want to secure it. I just like using oem stuff when available.

O$mo

mind telling me the PNs for them and pictures

__________________

az_240

If you want to do it right you'd get these
http://www.courtesyparts.com/76500j-...-p-138684.html
and these
http://www.courtesyparts.com/76897ea...-p-138694.html
and these
http://www.courtesyparts.com/78910b-...-p-138697.html
and these
http://www.courtesyparts.com/63830ea...-p-138679.html
and some screws like jr_ss posted in his first pic

Or just use double sided and screws on the ends and hope it holds.

jr_ss

The skirts also have mounts on the lower portion. I didn't post a picture of these but they can be attached by sheet metal screws directly into the body or installing rivnuts like I used on those small plates and bolting them on.

__________________
My SR20VET

iHateMySilvia

are these or something like it available for purchase?





#9

__________________

NaVanBrosガレ​​ージLtd,Co.

Agamemnon

I got my clips from the dealership. Its not exactly the same clip. However, the differences shouldn't affect mounting. They came with a plastic insert which can easily be removed.

Agamemnon

So I had a chance to try out the j-nuts and did a test fit with my NAVAN skirts. The J-nuts fit the the quarter panels perfectly. Make sure you use #12 sized metal body screw with the large sized head/washer to help distribute the clamp load across the skirt.

I also used new grommets in the front fenders because my old ones where beat to hell. I used an aftermarket company that sells a pack of 25 for about $15. This comes in handy for the rest of the front end. Other parts of the fenders use these grommets to secure them and keep them straight.

As you can see, with the new grommets in the front and the Kouki J-nuts in quarter panels the skirts mount perfectly and hug the body of the car even without the need for 3M body tape. 3M tape is still needed for final installation. Take a look at some pics I took. Sorry about the lighting.

FaLKoN240

Looks nice. I need to get on this.

Mine are still secured with zipties. No problems yet tho.

__________________

Best way to do business with me? Make your best offer FIRST.

OBEEWON

brilliant...............

__________________

dhnedgj

Anyone know a place where i can also get these, but not pay such a lame price for shipping?

moebiius

^^^eBay

Agamemnon, you seem to have this in the bag...mind elaborating the names of the parts corresponding with the numbers in the scanned pic up top? It seems that Au-Ve-Co has all the parts...found this on eBay
http://www.ebay.com/itm/au-ve-co-u-t...item2a13e03a11
are these the #9 pieces that you refer to J nuts?

can we get a list going with the amounts needed for a set to put it together if you don't mind, it will benefit me and the rest of us, I don't read japanese and there doesn't seem to be a definitive thread that lists how many of what part and/or a comparable part associated with it such as your grommets from Au-Ve-Co part number 20764 which I found...also I don't know what part goes into what area for that matter...can you help out or point out where there is a proper diagram to where which part goes...nissan diagrams are kind of vague. Thank you kindly
Ken

delado

you guys are overthinking this shit waaaaay to much. Nissan diagrams are not vague. The part numbers are posted. Stop asking shit that's already been answered with posts above yours

__________________

Agamemnon

01241-00841: x4 for the rear quarter panel(purchase from dealership)
01281-00831: x4 for the front fender(a box of 25 can be purchased from ebay)
01451-00841: x8 screws that hold everything on.(purchase from dealership, ebay, or hardware store)
Then just get some 1/2" 3M VHB body trim tape.