Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-02-2015, 01:03 PM   #1
bahlorm
Leaky Injector
 
Join Date: Jul 2014
Location: charlestown indiana
Age: 31
Posts: 55
Trader Rating: (0)
bahlorm is an unknown quantity at this point
Feedback Score: 0 reviews
sr20 won't rev over 4500 rpm.

Hey guys I'm stumped here. I have a red top sr20. It has a gt2781r turbo, 550cc fiveo injectors, z32 maf, and an enthalpy tuned ecu.
I had the turbo installed with a stock system before but I was experiencing fuel cut at 6k rpm. Now with the injectors, maf, and tune my car gets to 4500 rpm and backfires constantly and doesn't go any higher rpm.
So far I have sent my ecu back to enthalpy to verify my ecu was correct. Went through 2 sets of fuel injectors. Tried about 3 different mafs. Got new plugs. Ran a jumper wire from my speed sensor to the ecu in case the ecu wasn't registering my wheels were turning causing the launch control to activate. Checked for any vacuum leaks with carb cleaner and also a poor man's smoke test with a cigarette. I'm lost at what this could be.
The car idles fine, revs fine until 4500 rpm. I'm getting no codes on the ecu. Anyone have any ideas on what to check? I'm at a total loss.
bahlorm is offline   Reply With Quote
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™