Bash Bars - Bumper Supports - Rear Bumper Support - Jacking Points - S13 & S14 - $150 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*Sonic Motor* · 03-04-2014, 05:47 PM

Thread has been changed to a normal advertiser ad!

http://zilvia.net/f/showthread.php?t=558119

mikey_S13 · 03-04-2014, 09:34 PM

how much for the front and rear (w/ jack point) bars ? for s13..

speedgod^s13 · 03-06-2014, 08:12 PM

Quote:

Originally Posted by mikey_S13

how much for the front and rear (w/ jack point) bars ? for s13..

Same question, shipped to 96816. Also, how safe is it to use the jack points? That's a lot of weight the bash bar has to be able to support.

johnydoesit · 03-06-2014, 08:37 PM

Would also like to know just how strong they are to be using as jack points.

eek · 03-06-2014, 10:15 PM

any pics of the bash bar on a s14? Pref a kouki

*Sonic Motor* · 03-07-2014, 01:17 PM

Quote:

Originally Posted by mikey_S13

how much for the front and rear (w/ jack point) bars ? for s13..

Jack points are an additional $90.

Quote:

Originally Posted by speedgod^s13

Same question, shipped to 96816. Also, how safe is it to use the jack points? That's a lot of weight the bash bar has to be able to support.

Quote:

Originally Posted by johnydoesit

Would also like to know just how strong they are to be using as jack points.

The jacking points are very strong. These bars will only work on a clean chassis with no previous damage. Here's a picture of the jacking points in action:

Quote:

Originally Posted by eek

any pics of the bash bar on a s14? Pref a kouki

Here you go:

BiG MiKE86 · 03-07-2014, 01:34 PM

i WANT these but they havent offered the S13 hatch rear yet... ill wait

OC94S14 · 03-07-2014, 01:41 PM

Will the kouki bash bar fit both USDM and JDM bumpers?

5280VertDET · 03-07-2014, 01:43 PM

Quote:

Originally Posted by OC94S14

Will the kouki bash bar fit both USDM and JDM bumpers?

Same, but for the shark and pig nose s13's

satal95 · 03-08-2014, 11:19 PM

So there will be no sag with a stock or aftermarket S13 Silvia bumper correct? If so i want one but just how much will shipping be to 78237? How much of a deposit are u asking for?

Sent from my X501_USA_Cricket using Tapatalk 2

SoCalDrifter · 03-09-2014, 10:05 PM

how much for the front and a rear with the jack point picked up

any pics on a zenki

Mister.E · 03-09-2014, 11:02 PM

would like to see pics of front and rear bars on a zenki, but mostly the front due to the blinkers in the bumper.

Maiku240sxS14 · 03-10-2014, 12:07 PM

Cool...I assume the front bash bar can still be installed with people running FMIC? Specifically the S14 Zenki?

zenkiset · 03-10-2014, 01:25 PM

Street Faction does an amazing job. I follow his instagram page. any pics of the front and rear bash bars with jacking points on an s14 zenki?

*Sonic Motor* · 03-10-2014, 07:23 PM

Quote:

Originally Posted by BiG MiKE86

i WANT these but they havent offered the S13 hatch rear yet... ill wait

Hopefully soon!

Quote:

Originally Posted by OC94S14

Will the kouki bash bar fit both USDM and JDM bumpers?

It will fit both.

Quote:

Originally Posted by 5280VertDET

Same, but for the shark and pig nose s13's

There is a zenki and chuki bash bar.

Quote:

Originally Posted by satal95

So there will be no sag with a stock or aftermarket S13 Silvia bumper correct? If so i want one but just how much will shipping be to 78237? How much of a deposit are u asking for?

Yes, no more sagging. I will PM you details.

Quote:

Originally Posted by SoCalDrifter

how much for the front and a rear with the jack point picked up

any pics on a zenki

I will PM you some pricing.

Quote:

Originally Posted by E Double

would like to see pics of front and rear bars on a zenki, but mostly the front due to the blinkers in the bumper.

Zenki S13 or S14?

Quote:

Originally Posted by Maiku240sxS14

Cool...I assume the front bash bar can still be installed with people running FMIC? Specifically the S14 Zenki?

Yes. It is designed to work with a FMIC

Mister.E · 03-10-2014, 08:53 PM

^ and that sits above the blinker holes so that the lights can still be used? and does it support the bumper at all?

bejota180sx · 03-10-2014, 10:09 PM

does anybody know if these work with chuki bumpers?

eek · 03-11-2014, 12:47 AM

Thanks for the pics. My main concern is if there will be any issues on a s14 kouki with a oem jdm bumper with the turn signals. I noticed in the picture the factory oem bumper retainer will no longer be used? So the bumper will only be attached to the fenders via the 2 10mm bolts?

*Sonic Motor* · 03-11-2014, 04:10 PM

Quote:

Originally Posted by E Double

^ and that sits above the blinker holes so that the lights can still be used? and does it support the bumper at all?

Yes, you will still be able to use the turn signals. It will fit, but it will be tight. It will support the bumper.

Quote:

Originally Posted by eek

Thanks for the pics. My main concern is if there will be any issues on a s14 kouki with a oem jdm bumper with the turn signals. I noticed in the picture the factory oem bumper retainer will no longer be used? So the bumper will only be attached to the fenders via the 2 10mm bolts?

You will no longer use the bumper retainer and the bumper will bolt up to the fenders. These bash bars were really designed more for cars using aftermarket aero bumpers with sagging issues. It can be used with the stock bumper, but that's not really what it was designed for.

Quote:

Originally Posted by bejota180sx

does anybody know if these work with chuki bumpers?

Yes, there is a specific version for the chuki.

typical · 03-16-2014, 01:50 PM

Interested. PM sent

03-04-2014, 05:47 PM	#1
Sonic Motor www.SonicMotor.com Join Date: Aug 2005 Location: 4981 N Irwindale Ave #100, Irwindale, CA Posts: 9,481 Trader Rating: (113) Feedback Score: 113 reviews	Bash Bars - Bumper Supports - Rear Bumper Support - Jacking Points - S13 & S14 - $150 Thread has been changed to a normal advertiser ad! http://zilvia.net/f/showthread.php?t=558119 __________________ Sonicmotor.com \| Zach @ Sonic Motor \| 626.363.9036 \| [email protected] Check out our website! ( CLICK ) Last edited by Sonic Motor; 03-17-2014 at 07:30 PM..

03-07-2014, 01:34 PM	#7
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 35 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	i WANT these but they havent offered the S13 hatch rear yet... ill wait __________________

03-07-2014, 01:41 PM	#8
OC94S14 Leaky Injector Join Date: Sep 2013 Location: Orange County Posts: 73 Trader Rating: (10) Feedback Score: 10 reviews	Will the kouki bash bar fit both USDM and JDM bumpers? __________________ 1995 240SX S14 Instagram: jeffrey_dotcom

03-08-2014, 11:19 PM	#10
satal95 Zilvia FREAK! Join Date: Mar 2004 Location: sa Posts: 1,512 Trader Rating: (24) Feedback Score: 24 reviews	So there will be no sag with a stock or aftermarket S13 Silvia bumper correct? If so i want one but just how much will shipping be to 78237? How much of a deposit are u asking for? Sent from my X501_USA_Cricket using Tapatalk 2 __________________ Signature image exceeds allowable size.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-04-2014, 09:34 PM	#2
mikey_S13 Leaky Injector Join Date: Jan 2008 Location: NW houston Age: 33 Posts: 145 Trader Rating: (2) Feedback Score: 2 reviews	how much for the front and rear (w/ jack point) bars ? for s13..

03-06-2014, 08:37 PM	#4
johnydoesit Leaky Injector Join Date: Oct 2010 Location: Riverside Age: 29 Posts: 79 Trader Rating: (5) Feedback Score: 5 reviews	Would also like to know just how strong they are to be using as jack points.

03-06-2014, 10:15 PM	#5
eek Zilvia FREAK! Join Date: Feb 2004 Location: California Age: 40 Posts: 1,025 Trader Rating: (29) Feedback Score: 29 reviews	any pics of the bash bar on a s14? Pref a kouki

03-09-2014, 10:05 PM	#11
SoCalDrifter Nissanaholic! Join Date: Jan 2010 Location: Thousand Oaks-818 Posts: 1,990 Trader Rating: (10) Feedback Score: 10 reviews	how much for the front and a rear with the jack point picked up any pics on a zenki

03-09-2014, 11:02 PM	#12
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 36 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	would like to see pics of front and rear bars on a zenki, but mostly the front due to the blinkers in the bumper.

03-10-2014, 12:07 PM	#13
Maiku240sxS14 Nissanaholic! Join Date: Jul 2007 Location: LA Posts: 2,019 Trader Rating: (37) Feedback Score: 37 reviews	Cool...I assume the front bash bar can still be installed with people running FMIC? Specifically the S14 Zenki?

03-10-2014, 08:53 PM	#16
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 36 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	^ and that sits above the blinker holes so that the lights can still be used? and does it support the bumper at all?

03-11-2014, 12:47 AM	#18
eek Zilvia FREAK! Join Date: Feb 2004 Location: California Age: 40 Posts: 1,025 Trader Rating: (29) Feedback Score: 29 reviews	Thanks for the pics. My main concern is if there will be any issues on a s14 kouki with a oem jdm bumper with the turn signals. I noticed in the picture the factory oem bumper retainer will no longer be used? So the bumper will only be attached to the fenders via the 2 10mm bolts?

03-16-2014, 01:50 PM	#20
typical Join Date: Mar 2009 Location: MI Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	Interested. PM sent