GUNMETALR32 S14 JDM Kouki OEM LIP group buy!!! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

spooled240 · 11-14-2011, 05:44 PM

i'm really interested but i wanna see how it looks first with it being 1" lower

Salem240 · 11-14-2011, 06:09 PM

Quote:

Originally Posted by spooled240

i'm really interested but i wanna see how it looks first with it being 1" lower

Would this help Spooled?

I tried to do my best, Adrian, but there still is a little droop in the middle of the lip and I dropped the side a hair but still couldn't get it quite right and it's lowered more like 1 1/4 - 1 1/2" in the front.

Salem240 · 11-14-2011, 06:14 PM

^^^^^^^^^^^

Quote:

Originally Posted by sw20>>s14

mind sharing that pic or any other pics of the prototype/concept rendition with us too? i'm finding it hard to commit without anything to base my judgment off of.

gunmetalr32 · 11-14-2011, 09:31 PM

That's a good example of how the front should look.. It actually looks like a lip now the rear part will be the same as the front

blueshark123 · 11-15-2011, 09:47 AM

Damn i really am on the wall with this product i want it now, but i need to buy chargespeed overs which is 600 and 2 seats which is over 1k for my car, then paint the lip and overfenders fuck i need my boss to pay me lol. i hate my car

spooled240 · 11-15-2011, 07:18 PM

that looks pretty good, what's the deadline for this group buy?

gunmetalr32 · 11-15-2011, 08:57 PM

Quote:

Originally Posted by blueshark123

Damn i really am on the wall with this product i want it now, but i need to buy chargespeed overs which is 600 and 2 seats which is over 1k for my car, then paint the lip and overfenders fuck i need my boss to pay me lol. i hate my car

I'll I'm asking is for a deposit.. I can hold the finished product at the group price until your ready

Quote:

Originally Posted by spooled240

that looks pretty good, what's the deadline for this group buy?

I don't have a dead line yet.. Just trying to fill in spots

whitenoise · 11-15-2011, 09:02 PM

Quote:

Originally Posted by spooled240

that looks pretty good, what's the deadline for this group buy?

DO IT !!!

3 more to make ten , let's do this people

upsdude · 11-15-2011, 11:19 PM

oh so only the side part will sit lower? i thought the whole lip was gonna hang a bit lower than stock. oh well still looks nice

spooled240 · 11-16-2011, 12:17 AM

Quote:

Originally Posted by whitenoise

DO IT !!!

3 more to make ten , let's do this people

I'll get it, maybe in a week or 2 tho after i pay rent i just bought something lol

spooled240 · 11-16-2011, 12:32 AM

i think the whole lip should be lower with the sides being a tad lower like the OEM style yeeeaa

whitenoise · 11-16-2011, 09:33 AM

Quote:

Originally Posted by spooled240

i think the whole lip should be lower with the sides being a tad lower like the OEM style yeeeaa

^^^THIS!!! I'll try to photoshop a couple samples tonight to add to salem240's samples

Salem240 · 11-16-2011, 10:15 AM

Quote:

Originally Posted by spooled240

i think the whole lip should be lower with the sides being a tad lower like the OEM style yeeeaa

If you compare the pics you can see that I dropped the side of the lip down about 1/2-3/4" so it will flow with the sideskirt better, you just cant see the sideskirt.....

sw20>>s14 · 11-16-2011, 01:10 PM

so are you and gunmetal working together on this? i still think we should have a DEFINITIVE concept to go by. even though you did a nice job with the chop, i don't want to go by your rendition, buying his product. might get ugly down the line with certain expectations.

Salem240 · 11-16-2011, 02:20 PM

Quote:

Originally Posted by sw20>>s14

so are you and gunmetal working together on this? i still think we should have a DEFINITIVE concept to go by. even though you did a nice job with the chop, i don't want to go by your rendition, buying his product. might get ugly down the line with certain expectations.

Adrian and I have been in contact about the photo rendering of this lip and with his description and communication between us this is the result. An actual production peice would be nice to make a definitive choice but from his description of the lip and from having purchased his valances, I personally have no problem giving a deposit on this. I just offered to help him out and there is nothing that I feel that would get "ugly".

Drftr915 · 11-16-2011, 02:44 PM

Hopefully the lip doesn't hang to low, i will be running mine with stock usdm s14 kouki side skirts like in whitenoise's sig pic.

gunmetalr32 · 11-16-2011, 05:43 PM

Quote:

Originally Posted by Salem240

If you compare the pics you can see that I dropped the side of the lip down about 1/2-3/4" so it will flow with the sideskirt better, you just cant see the sideskirt.....

yes this is the problem i want to correct .

Quote:

Originally Posted by sw20>>s14

so are you and gunmetal working together on this? i still think we should have a DEFINITIVE concept to go by. even though you did a nice job with the chop, i don't want to go by your rendition, buying his product. might get ugly down the line with certain expectations.

i don't have very good Photoshop skills. salem240 is helping me out.

Quote:

Originally Posted by Salem240

Adrian and I have been in contact about the photo rendering of this lip and with his description and communication between us this is the result. An actual production peice would be nice to make a definitive choice but from his description of the lip and from having purchased his valances, I personally have no problem giving a deposit on this. I just offered to help him out and there is nothing that I feel that would get "ugly".

i dont think anyone will be unsatisfied with the way this will turn out.

Quote:

Originally Posted by Drftr915

Hopefully the lip doesn't hang to low, i will be running mine with stock usdm s14 kouki side skirts like in whitenoise's sig pic.

it wont be any lower than the greddy lip

gunmetalr32 · 11-16-2011, 06:01 PM

the greddy lip matches the sid skirts well.. i want to acive the same thing with the oem one

_ Microsoft paint skills yo!!!!!

sw20>>s14 · 11-16-2011, 06:58 PM

Quote:

Originally Posted by Salem240

Adrian and I have been in contact about the photo rendering of this lip and with his description and communication between us this is the result. An actual production peice would be nice to make a definitive choice but from his description of the lip and from having purchased his valances, I personally have no problem giving a deposit on this. I just offered to help him out and there is nothing that I feel that would get "ugly".

gotcha, thats something we should know. i didnt know you guys were in collaboration. seemed like you were just helping him out and taking a shot in the dark with what the final product might look like. i just didnt want to commit to another members rendition because theres always a huge chance that gunmetals will turn out different.

and no one here is questioning gunmetals work, its fantastic work, but when youre altering a familiar design to hang down lower an inch, were talking about aesthetics and it gets subjective. i trust his work 110%, but how about our tastes in lips and how far they should/shouldnt extend? that's why im hesitant to commit without a more accurate concept or rendering.

but anywho, im sure none of this helps. i am definitely interested in a package deal, but not sure what else, short of seeing a prototype, can be done to put me over the top and make the deposit.

gunmetalr32 · 11-16-2011, 08:49 PM

Quote:

Originally Posted by sw20>>s14

gotcha, thats something we should know. i didnt know you guys were in collaboration. seemed like you were just helping him out and taking a shot in the dark with what the final product might look like. i just didnt want to commit to another members rendition because theres always a huge chance that gunmetals will turn out different.

and no one here is questioning gunmetals work, its fantastic work, but when youre altering a familiar design to hang down lower an inch, were talking about aesthetics and it gets subjective. i trust his work 110%, but how about our tastes in lips and how far they should/shouldnt extend? that's why im hesitant to commit without a more accurate concept or rendering.

but anywho, im sure none of this helps. i am definitely interested in a package deal, but not sure what else, short of seeing a prototype, can be done to put me over the top and make the deposit.

i hear you ... im going to have my friend help me with the more accurate concept .. i m having a hard time finding better pictures of the lip an side skirts.. i would like pictures just like the 2 i posted with the red lines

whitenoise · 11-16-2011, 09:02 PM

ok i tried to photoshop of what hopefully it looks after adrian is finish with the lip, also to show in relevance to the side skirts

top pics = oem kouki , bottom pics replica lip approx. 1 inch lower

side view

front left angle

front right angle

gunmetalr32 · 11-16-2011, 09:35 PM

yes.. this is how i want the lip.. i love it

maybe a tiny bit lower in the front...

whitenoise · 11-17-2011, 12:26 AM

Quote:

Originally Posted by gunmetalr32

yes.. this is how i want the lip.. i love it

maybe a tiny bit lower in the front...

yup i just followed the OEM lip lines underneath, so even that way is better than the OEM height already . if u can retain the overall shape and pretty much just extend an inch of material in between, itll look tits . OEM but better kinda way

gunmetalr32 · 11-17-2011, 12:43 AM

I love it.. That's what I was going for..

spooled240 · 11-17-2011, 12:55 AM

dude that car...fuck my life

gunmetalr32 · 11-17-2011, 01:40 AM

Quote:

Originally Posted by whitenoise

DO IT !!!

3 more to make ten , let's do this people

Quote:

Originally Posted by spooled240

dude that car...fuck my life

And that could be your car... You just need the navan sides and my lip

blueshark123 · 11-17-2011, 07:45 AM

OK! lets say for some reason i dont like how the final result looks which i doubt would I be able to get a refund or not. Also how much time will it take for the lips to be made after 10 people are in? Also will I be able to get 2 sets of hardware since my oem lip never came with it?

The truth of the matter is if you get 10 people in the group buy I know for a fact you will be able to sell atleast 20 lips if it wasnt for a group buy/wait. So just a heads up make more then just 10 lol

whitenoise · 11-17-2011, 09:28 AM

Quote:

Originally Posted by gunmetalr32

And that could be your car... You just need the navan sides and my lip

i got navan sides on for quite sometime now

Quote:

Originally Posted by blueshark123

OK! lets say for some reason i dont like how the final result looks which i doubt would I be able to get a refund or not. Also how much time will it take for the lips to be made after 10 people are in? Also will I be able to get 2 sets of hardware since my oem lip never came with it?

The truth of the matter is if you get 10 people in the group buy I know for a fact you will be able to sell atleast 20 lips if it wasnt for a group buy/wait. So just a heads up make more then just 10 lol

As long as the people that didn't do the group buy pay the same as we do and wait long like we do. I won't be pissed . I just hate some other group buys where people who didn't do the group buy paying the same cheaper price as the people who did . Ok end rant LOL

Salem240 · 11-17-2011, 10:23 AM

Nice pics whitenoise! That is a great example of how it should look. I'm so ready to get my Kouki done

blueshark123 · 11-17-2011, 12:06 PM

Quote:

Originally Posted by whitenoise

As long as the people didn't do the group buy pay the same as we do and wait long like we do. I won't be pissed . I just hate some other group buys where people who didn't do the group buy paying the same cheaper price as the people who did . Ok end rant LOL

I agree 100% with that

11-16-2011, 01:10 PM	#44
sw20>>s14 Post Whore! Join Date: Jan 2005 Location: bay area Posts: 5,656 Trader Rating: (19) Feedback Score: 19 reviews	so are you and gunmetal working together on this? i still think we should have a DEFINITIVE concept to go by. even though you did a nice job with the chop, i don't want to go by your rendition, buying his product. might get ugly down the line with certain expectations. __________________ s14\| y34\| 911 gts\| exige s\| 600rr\| r3\| 250r\| 85 girlfriend

11-16-2011, 09:02 PM	#51
whitenoise Zilvia Junkie Join Date: Sep 2008 Location: new york Posts: 586 Trader Rating: (23) Feedback Score: 23 reviews	ok i tried to photoshop of what hopefully it looks after adrian is finish with the lip, also to show in relevance to the side skirts top pics = oem kouki , bottom pics replica lip approx. 1 inch lower side view front left angle front right angle __________________ http://TM-SPL.COM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-14-2011, 05:44 PM	#31
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,138 Trader Rating: (27) Feedback Score: 27 reviews	i'm really interested but i wanna see how it looks first with it being 1" lower

11-14-2011, 09:31 PM	#34
gunmetalr32 Post Whore! Join Date: Jan 2008 Location: oxnard,CA Age: 34 Posts: 3,077 Trader Rating: (14) Feedback Score: 14 reviews	That's a good example of how the front should look.. It actually looks like a lip now the rear part will be the same as the front

11-15-2011, 09:47 AM	#35
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	Damn i really am on the wall with this product i want it now, but i need to buy chargespeed overs which is 600 and 2 seats which is over 1k for my car, then paint the lip and overfenders fuck i need my boss to pay me lol. i hate my car

11-15-2011, 07:18 PM	#36
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,138 Trader Rating: (27) Feedback Score: 27 reviews	that looks pretty good, what's the deadline for this group buy?

11-15-2011, 11:19 PM	#39
upsdude Post Whore! Join Date: Apr 2009 Location: Fontana (the good part) Posts: 2,721 Trader Rating: (46) Rides Gallery: upsdude Feedback Score: 46 reviews	oh so only the side part will sit lower? i thought the whole lip was gonna hang a bit lower than stock. oh well still looks nice

11-16-2011, 12:32 AM	#41
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,138 Trader Rating: (27) Feedback Score: 27 reviews	i think the whole lip should be lower with the sides being a tad lower like the OEM style yeeeaa

11-16-2011, 02:44 PM	#46
Drftr915 Zilvia Junkie Join Date: Apr 2009 Location: Hawaii/Colorado Age: 32 Posts: 423 Trader Rating: (22) Feedback Score: 22 reviews	Hopefully the lip doesn't hang to low, i will be running mine with stock usdm s14 kouki side skirts like in whitenoise's sig pic.

11-17-2011, 12:43 AM	#54
gunmetalr32 Post Whore! Join Date: Jan 2008 Location: oxnard,CA Age: 34 Posts: 3,077 Trader Rating: (14) Feedback Score: 14 reviews	I love it.. That's what I was going for..

11-17-2011, 12:55 AM	#55
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,138 Trader Rating: (27) Feedback Score: 27 reviews	dude that car...fuck my life

11-17-2011, 07:45 AM	#57
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	OK! lets say for some reason i dont like how the final result looks which i doubt would I be able to get a refund or not. Also how much time will it take for the lips to be made after 10 people are in? Also will I be able to get 2 sets of hardware since my oem lip never came with it? The truth of the matter is if you get 10 people in the group buy I know for a fact you will be able to sell atleast 20 lips if it wasnt for a group buy/wait. So just a heads up make more then just 10 lol

11-17-2011, 10:23 AM	#59
Salem240 Zilvia Member Join Date: May 2011 Location: North Carolina Posts: 153 Trader Rating: (10) Feedback Score: 10 reviews	Nice pics whitenoise! That is a great example of how it should look. I'm so ready to get my Kouki done