DreamN

You wouldn't want to make a company that sold you poor quality items and non-fitting parts bad? Really?

They do plenty of it themselves, but as an unsatisfied customer it's your duty to report your experience with the company and its products.

__________________
- Jimmy

Wanted:
TBD

For Sale:
TBD

alwyzDTF

Gaurentee chaser reads all this and doesnt reply to me or answer the phones haha fml
theres got to be a way to cut and remold the stuff? fiberglass isn't ridiculously expensive

fliprayzin240sx

You can cut and rebuild it. The problem is would it be worth it? Just to fix it will cost more than what the kit is worth. Most bodyshop wont touch fiberglass because of how much man hours it takes to work on. $300 bodykit, spend $800-1200 just to make it fit worth it? You can learn how to do fiberglass and do it yourself...but like I said, be prepared to spend alot of time to do it. This is the reason folks spend money on $800-1200 kits that are well known to fit. Next time, just get a Version Select kit...

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

ChaserAero

Give me a call I would be more they happy to Help you out. Thanks Steve M 1-866-360-5487 ext 102

__________________

ChaserAero

I am sold over 50-75 of these kits in the last year and this is really the first issue I have had with the kit not fitting 100%. I have installed over 100 different kits from every company out there and some fit great and some need work. I have install original Origin Kits and had to do a lot of work to get them to fit plus alot of prep work to make it perfect and the customer has waited 6-8 months just for the kit to come in. It happens that sometime when parts are made they are taken out of the mold to early and not cured 100% then loaded on a container and get wrapped and twisted. Trust me I am here trying to help everyone that does not want to spend $1000 every month when they crash there car into a wall drifting. I do believe you get what you pay for but I would rather be able to buy 3 kits over 1 any day of the week. Please give me a call and I will help you out. I am here monday-friday 9am to 5pm. I am the only one here so if for some reason I don't pick up its cause I am in the back boxing up orders. You can always reach me at my email [email protected] . Thanks Steve M. 1-866-360-5487 ext 102

__________________

ChaserAero

For Real out of 30 people and 1 person has some fitment issue and that should be my title.

__________________

kernel

I have 2 s14 kouki body kit and they fit good

In my case, I removed the big front bumper support that bolt on frame rail to install the bumper

I could have trimmed the bumper to fit onto it but I didn't want, that probably your case of why it wave like that, I guess you had to bend the bumper to be able to install it to front fender hole

EvoVIII808

I went in on the shipping with Alwzdtf, mine also had a few cracks/chips, but its not a big deal. My fitment is good on the front, and 1 side skirt. The other side is really really tight fitting, and the Rear bumper sits lower in the middle. These are all things i can fix with no problem..Besides that its all good.

To back up Chaser, I use to own an Evo and ordered the top of the line (VOLTEX) body kit, Hood the whole 9, and I still had to do some Major fixing. Its not always " you get what you pay for", and im happy with what i got. Will do business again.

__________________
Check Out My S13 Build

ChaserAero

Do you have any pictures of the car with the kit I would love to see. It thanks for your comments on your install hope it will help others out.

__________________

kernel

I'm currently painting the car, so once it's done. I'll get back with pictures

ChaserAero

Sweet can't wait to see them. Thanks for the Update.

__________________

EvoVIII808

Here are a few of mine.
Cars not finished yet, but you get the idea.
Slight bulge in the middle that i will fix, along with the alignment on the passenger side.





This is what im working to fix right now. Like i said, nothing major.

__________________
Check Out My S13 Build

drftx

just got my kit in today fast shipping steve sent it out friday and it came in today no cracks or chips on my kit gonna test fit it tomorrow since its like cold as shit out side but by the looks of it looks decent but looks can be deceiving

__________________

EvoVIII808

^^ update your blog man!! lol

__________________
Check Out My S13 Build

drftx

its gonna be updated in a bit im eating haha which blog my tumblr or my blogspot

__________________

EvoVIII808

Either one, I jump around.

__________________
Check Out My S13 Build

drftx

with some patience and a dremel the skirts fit idk about the front bumper since i wont be using it because i have a works 9 bumper rear bumper ill be working on tomorrow


Had to shave down the sides with a dremel worked amazing after a lot of sanding n shaving down





this much needed to be shaved off the side still gotta cut some off where the skirt meets the door got to cold with no heater in the garage





Drivers side looks pretty good it was a really tight fit i had to shaved the sides down and cut off a piece of the skirt like in the pic but now it fits





passengers side needed work shaved the sides and cut the piece that goes by the door on both skirts like in the pic i showed after some time shaving some material off it eventually fit

__________________

ChaserAero

Car looks great I like it!

__________________

hellaslows13

ditto. I'm looking for super made instant g kit for s14 zenki

__________________
wavybert / zenki / build thread

drftx

rear bumper turned out like doodoo

__________________

EvoVIII808

^^shoots!! I ziptied mine up. i will get pics of it today.

*Off topic*
Where did you get your trunk latches? mine started acting up on me last night.

__________________
Check Out My S13 Build

drftx

gonna try heat gun and zipties

and i bought it at any local hardwear store its called like trailer something

__________________

EvoVIII808

Here is how i fixed my rear.
Took off the center piece, drilled 5 holes across the bottom of it, and lined the holes up with the bumper, drilled holes in the bumper and ran zipties through. =) I used the skinny zipties, but i am going to use the bigger ones since the small ones keep breaking when i pull on them to tighten it up.
I may add to more so i can pull up more of the corners, but i will do it when its time to paint.

__________________
Check Out My S13 Build

digitial_vangaurd

how much for just a kouki s14 front bumper?!!>?! pm me asap zipcode 94503

SupaDoopa

Your kits fit like complete asshole.

fliprayzin240sx

Really? This looks great and you like it? I mean I understand that these are cheap but you do really have to praise these?

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

s13 @ fullboost

hahaha your so funny man since I have been on this forum you always have the funnest shit to say

on a serious note though that totally looks like shit with sprinkles on it, I would not buy this kit after seeing this.

__________________

godrifttoday

It's a rear happy face, part of the design

__________________
NEED Bolt kits for your car?

DrftKingIII

Chaser doesn't even respond to my PM's anymore.

__________________

MIKE-240sx

Same thing...said he was gonna refund $15 for damages on body kit and never did..never doing business with them again..buyers beware

__________________
1992 Nissan 240sx Project