lost timing on ka24e - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

fender-startocaster · 02-24-2011, 08:59 AM

Long story short, i removed the oil pump and dizzy without marking it and to make it worse the engine wasnt on TDC.

Now i need to know how to set timing.

My understanding is that all i have to do is,
1. set the the engine on tdc,
2. Aligne oil pump with marks
3. install dizzy where the rotor points at cylinder 1.

Am i missing anything?

fender-startocaster · 02-27-2011, 06:38 PM

UPDATE!!

I got the car running. All i did was put the motor on TDC and installed the oil pump and dizzy. My problem is that now it makes a really bad noise. I did nothing but replaced the oil pump gasket. I have an oil press gauge and it says that the pump is in working order. anyway here is a video.

YouTube - 046.MOV

ship2236 · 02-27-2011, 07:52 PM

Too hard to tell. Would have to check it out in person. Is it coming from the timing chain?

fender-startocaster · 02-27-2011, 09:25 PM

Quote:

Originally Posted by ship2236

Too hard to tell. Would have to check it out in person. Is it coming from the timing chain?

To me, it sounds like it coming from the cylinder head. Almost as if the valves are hitting or lifters unblead themselves. I didnt touch the chain at all so i doubt thats the culprit. I did however checked to make sure that head and bottom block where aligned properly and they are sooo im out of ideas. ill keep at it tomorrow.

fender-startocaster · 02-28-2011, 10:10 AM

Below is the prcedure i fallowed.

My marks may not be properly aligned. Would that cause a problem?

fender-startocaster · 02-28-2011, 08:30 PM

UPDATE!!!!!!

car runs perfect!! put engine on tdc (compression stroke) aligned oil pump and spindle and intalled dizzy starting just before spark plug #1.

Once i removed i noticed the oil pump was not aligned. Do not quote me on this but i believe when the oil pump is aligned it provides better lubrication. Anyway im quite happy my car is running now.

02-27-2011, 07:52 PM	#3
ship2236 Nissanaholic! Join Date: Jul 2008 Location: lancaster ca Age: 35 Posts: 2,126 Trader Rating: (18) Feedback Score: 18 reviews	Too hard to tell. Would have to check it out in person. Is it coming from the timing chain? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-24-2011, 08:59 AM	#1
fender-startocaster Zilvia Junkie Join Date: Jul 2009 Location: palmdale Posts: 446 Trader Rating: (6) Feedback Score: 6 reviews	lost timing on ka24e Long story short, i removed the oil pump and dizzy without marking it and to make it worse the engine wasnt on TDC. Now i need to know how to set timing. My understanding is that all i have to do is, 1. set the the engine on tdc, 2. Aligne oil pump with marks 3. install dizzy where the rotor points at cylinder 1. Am i missing anything?

02-27-2011, 06:38 PM	#2
fender-startocaster Zilvia Junkie Join Date: Jul 2009 Location: palmdale Posts: 446 Trader Rating: (6) Feedback Score: 6 reviews	UPDATE!! I got the car running. All i did was put the motor on TDC and installed the oil pump and dizzy. My problem is that now it makes a really bad noise. I did nothing but replaced the oil pump gasket. I have an oil press gauge and it says that the pump is in working order. anyway here is a video. YouTube - 046.MOV

02-28-2011, 10:10 AM	#5
fender-startocaster Zilvia Junkie Join Date: Jul 2009 Location: palmdale Posts: 446 Trader Rating: (6) Feedback Score: 6 reviews	Below is the prcedure i fallowed. My marks may not be properly aligned. Would that cause a problem?

02-28-2011, 08:30 PM	#6
fender-startocaster Zilvia Junkie Join Date: Jul 2009 Location: palmdale Posts: 446 Trader Rating: (6) Feedback Score: 6 reviews	UPDATE!!!!!! car runs perfect!! put engine on tdc (compression stroke) aligned oil pump and spindle and intalled dizzy starting just before spark plug #1. Once i removed i noticed the oil pump was not aligned. Do not quote me on this but i believe when the oil pump is aligned it provides better lubrication. Anyway im quite happy my car is running now.