Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 08-05-2015, 05:54 PM   #3691
KiNg MaRtY
 
KiNg MaRtY's Avatar
 
Join Date: Jan 2014
Location: Corona, CA
Age: 37
Posts: 4
Trader Rating: (0)
KiNg MaRtY is an unknown quantity at this point
Feedback Score: 0 reviews
I have a HKS GT2530 with a .86 turbine housing that had bearing failure. I plan to convert to a GT2871. There is a shop that claims they may even be able to machine it out to convert it to a 3071 or perhaps even a 3076.

I am doing my research on here as this is a very popular turbo in the SR20 community and not in the 4G63 community. This is for my 92 Galant VR-4 or I may put it in my Miata but would go with a 2871 for sure if it does go into the Miata.
__________________
92 Galant VR4 - E3 16g, KW V3 / 94 Miata / 2006 Evo IX - 417 HP 418 TQ
KiNg MaRtY is offline   Reply With Quote
Sponsored Links
Old 08-06-2015, 08:16 PM   #3692
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,665
Trader Rating: (17)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 17 reviews
Tuned my Sr20 today at Autotalent, in Carson CA.

Sr20det
-bone stock bottom end
-stock Headgasket
-stock headbolts
-stock valve springs
-Stock intake manifold, and exhaust manifold

-3in exhaust, with catback
-tomei 256 poncams
-gt2871r .64
-tomei 740cc injectors
-tomei FPR @3.5 bar
-Apexi PFC
-Aem E85 fuel pump
-E85 fuel

368whp @17psi

Intake manifold is choking out at around 6,200rpm. A nice Freddy would help out and make it breath better though.

Compliments of Koji Arai for tuning this Sr with stock HG, and bolts.

Last edited by Dboyizmlg; 08-07-2015 at 11:17 AM..
Dboyizmlg is offline   Reply With Quote
Old 08-06-2015, 08:44 PM   #3693
cotbu
Post Whore!
 
cotbu's Avatar
 
Join Date: Sep 2005
Location: SWFL
Age: 47
Posts: 3,318
Trader Rating: (3)
cotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nice
Feedback Score: 3 reviews
That's with e85? it's right on point with the average pump gas though. 17psi ruff tuned makes 350hp. What is the torque?
34~ or 36~?


Sent from a Highly Tuned Note 4.5!!!
__________________

LoverTechnologies "Half Broken Things!"
cotbu is offline   Reply With Quote
Old 08-06-2015, 09:11 PM   #3694
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,665
Trader Rating: (17)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 17 reviews
Quote:
Originally Posted by cotbu View Post
That's with e85? it's right on point with the average pump gas though. 17psi ruff tuned makes 350hp. What is the torque?
34~ or 36~?


Sent from a Highly Tuned Note 4.5!!!
Tq is 339, only 1 shy of 340, lol.

Injectors are at 96% duty....( I know)
If I had bigger injectors, and a Freddy intake manifold I'm sure it should be another 15-20whp more, at the same boost level. Also, with it breathing more air after 6,300rpm.

Peak power (368whp) is at 6,200. After that it starts to slowly take a dive, this is where the Freddy intake comes to play.
Dboyizmlg is offline   Reply With Quote
Old 08-08-2015, 02:32 PM   #3695
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Why not run the FPR at 4 bar to let up on a bit of duty cycle?


Sent from my iPhone using Tapatalk
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-08-2015, 03:40 PM   #3696
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,665
Trader Rating: (17)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 17 reviews
Quote:
Originally Posted by TheRealSy90 View Post
Why not run the FPR at 4 bar to let up on a bit of duty cycle?


Sent from my iPhone using Tapatalk
Main reason I don't turn up to 4 bar, is because I only have one in tank fuel pump(Aem 340plh).

Running it at 4 bar with one fuel pump is going to shorten the life of the pump drastically.
People that run 4 bar usually have 2 fuel pumps.
Dboyizmlg is offline   Reply With Quote
Old 08-08-2015, 03:44 PM   #3697
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
I figured either way the pump is pumping the same amount of fuel.


Sent from my iPhone using Tapatalk
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-08-2015, 04:03 PM   #3698
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,665
Trader Rating: (17)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 17 reviews
Btw, I got a bit of info on the water/meth injection tuning with PFC.
Koji has tuned a lot of water/meth With 91 pump.

He says it really simple, the only time meth is injected is when it's in boost.
He doesn't like it as much though.
The reason why, is because some times the meth injection nozzle gets clogged, and then the proper amount of meth is not being injected this causing the motor go boom.

Also he stated that when tuning it, when there is a wot pull the first 2 seconds there is a big Jump in knock, then as the meth kicks in, it lowers the knock back down to safe level.

Besides that, he is ok with it. Just recommends to replace nozzle tip once a year.
Dboyizmlg is offline   Reply With Quote
Old 08-09-2015, 02:36 AM   #3699
TheRealSy90
Premium Member
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 30
Posts: 7,679
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Koji is super experienced with PowerFC tuning. He was my tuner of choice until I decided to change to an AEM Ems.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-09-2015, 09:11 AM   #3700
5280VertDET
Nissanaholic!
 
5280VertDET's Avatar
 
Join Date: Aug 2013
Location: Denver
Age: 37
Posts: 2,052
Trader Rating: (14)
5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light
Feedback Score: 14 reviews
BUMP again,

Any pictures of the universal 2871 and a intake pipes with a MAF?
__________________
S13 Vert | SR | PE1420 | 5-Speed | 15x9.5 - 0 |
5280VertDET is offline   Reply With Quote
Old 08-09-2015, 09:30 AM   #3701
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,665
Trader Rating: (17)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 17 reviews
Quote:
Originally Posted by TheRealSy90 View Post
Koji is super experienced with PowerFC tuning. He was my tuner of choice until I decided to change to an AEM Ems.
He can also tune AEM EMS, and is really familiar with that standalone as well.
Hit him up for info!
Dboyizmlg is offline   Reply With Quote
Old 08-09-2015, 10:31 AM   #3702
Bleakley
Zilvia Addict
 
Join Date: Apr 2011
Location: Near Pittsburgh, PA
Posts: 634
Trader Rating: (1)
Bleakley is an unknown quantity at this point
Feedback Score: 1 reviews
So why don't people like the new GTX2871R? Same packaging with an updated/improved compressor wheel resulting in a little more power? Seems like the ultimate/top out choice for a T2 bottom mount...
Details please. I won't be purchasing for a long time, but trying to decide between gtx2871r or gtx3076r
Bleakley is offline   Reply With Quote
Old 08-09-2015, 10:57 AM   #3703
s13drob
Zilvia Addict
 
s13drob's Avatar
 
Join Date: Jan 2008
Location: socal
Posts: 774
Trader Rating: (29)
s13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymore
Feedback Score: 29 reviews
S13 Sr20det
91 pump
18psi boost
Power FC Djetro
Gtx2867r .64 external gate
VQ coilpacks
Stock ex mani w/Tial WG
Tial bov vta
Tomei 256 poncams
Supertech valve springs/retainers
Apexi HG with ARP studs
CP pistons 86.5 w/ 8.5 comp
Stock rods w/ ARP bolts
Nismo fuel pressure regulator
Walbro 255
3" exhaust

Tuned by Koji as well. I've been wanting some advice on my setup and since Koji is being mentioned. Given that it's a GTX turbo. People aren't mentioning much on their fuel choice but it seems like everyone is using higher than 91 for the numbers their getting. It seems like I need e85 to get more boost.


s13drob is offline   Reply With Quote
Old 08-09-2015, 12:07 PM   #3704
derass
Zilvia FREAK!
 
Join Date: Jun 2010
Location: Toronto, ON
Age: 33
Posts: 1,182
Trader Rating: (0)
derass is making a name for him/her selfderass is making a name for him/her self
Feedback Score: 0 reviews
Quote:
Originally Posted by 5280VertDET View Post
BUMP again,

Any pictures of the universal 2871 and a intake pipes with a MAF?
I have some pics on my other computer, I will post them when I get a chance. You need a 45* coupler at the inlet, a section of pipe with a 45* bend IIRC, add ports for breather and recirc, then another coupler at the MAF.
derass is offline   Reply With Quote
Old 08-09-2015, 12:45 PM   #3705
e1_griego
Premium Member
 
e1_griego's Avatar
 
Join Date: Sep 2004
Location: Independence, Ore.
Age: 36
Posts: 2,642
Trader Rating: (24)
e1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond repute
Feedback Score: 24 reviews
^This is what I did for both my GTX setups. Actually I ran a 90* coupler and 3" piping for one of them as it packaged better that way.
e1_griego is online now   Reply With Quote
Old 08-09-2015, 02:25 PM   #3706
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,665
Trader Rating: (17)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 17 reviews
Quote:
Originally Posted by s13drob View Post
S13 Sr20det
91 pump
18psi boost
Power FC Djetro
Gtx2867r .64 external gate
VQ coilpacks
Stock ex mani w/Tial WG
Tial bov vta
Tomei 256 poncams
Supertech valve springs/retainers
Apexi HG with ARP studs
CP pistons 86.5 w/ 8.5 comp
Stock rods w/ ARP bolts
Nismo fuel pressure regulator
Walbro 255
3" exhaust

Tuned by Koji as well. I've been wanting some advice on my setup and since Koji is being mentioned. Given that it's a GTX turbo. People aren't mentioning much on their fuel choice but it seems like everyone is using higher than 91 for the numbers their getting. It seems like I need e85 to get more boost.


You also have stock intake manifold...? looks like it starts to choke at 6,400 rpm.

I highly suggest a Freddy intake so it wont drop at high rpm.

E85 fuel will be your best friend! For safety reasons, and to achieve more power!!! You should retune on E85 and turn the boost up to 22psi.
You could be at 400whp. Talk to Koji, he will be super glad you are tuning with E85.
Dboyizmlg is offline   Reply With Quote
Old 08-09-2015, 08:14 PM   #3707
5280VertDET
Nissanaholic!
 
5280VertDET's Avatar
 
Join Date: Aug 2013
Location: Denver
Age: 37
Posts: 2,052
Trader Rating: (14)
5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light5280VertDET is a glorious beacon of light
Feedback Score: 14 reviews
Quote:
Originally Posted by derass View Post
I have some pics on my other computer, I will post them when I get a chance. You need a 45* coupler at the inlet, a section of pipe with a 45* bend IIRC, add ports for breather and recirc, then another coupler at the MAF.
Thank you, that would be VERY helpful.

I have the 45*, but it's tight.




Quote:
Originally Posted by e1_griego View Post
^This is what I did for both my GTX setups. Actually I ran a 90* coupler and 3" piping for one of them as it packaged better that way.
This may be the other choice tomorrow.

I am pulling my hair out with this shit.
__________________
S13 Vert | SR | PE1420 | 5-Speed | 15x9.5 - 0 |
5280VertDET is offline   Reply With Quote
Old 08-09-2015, 08:25 PM   #3708
S13alldayyo
Zilvia Addict
 
S13alldayyo's Avatar
 
Join Date: Mar 2012
Location: Florida
Posts: 653
Trader Rating: (3)
S13alldayyo is an unknown quantity at this point
Feedback Score: 3 reviews
Your not going to reach 400 with 750cc injectors, my 1000cc are like 90% on e85 on 20 psi but that's stock base fuel pressure


Sent from my iPhone using Tapatalk
S13alldayyo is offline   Reply With Quote
Old 08-09-2015, 08:31 PM   #3709
e1_griego
Premium Member
 
e1_griego's Avatar
 
Join Date: Sep 2004
Location: Independence, Ore.
Age: 36
Posts: 2,642
Trader Rating: (24)
e1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond repute
Feedback Score: 24 reviews
Quote:
Originally Posted by 5280VertDET View Post
Thank you, that would be VERY helpful.

I have the 45*, but it's tight.






This may be the other choice tomorrow.

I am pulling my hair out with this shit.
I bought one of these: http://www.mandrel-bends.com/catalog...-bend-608.html and then a buddy cut and welded it for me. Welded on bungs for bov recirc and for a catch can line and that's it.

e1_griego is online now   Reply With Quote
Old 08-09-2015, 08:57 PM   #3710
Bleakley
Zilvia Addict
 
Join Date: Apr 2011
Location: Near Pittsburgh, PA
Posts: 634
Trader Rating: (1)
Bleakley is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by S13alldayyo View Post
Your not going to reach 400 with 750cc injectors, my 1000cc are like 90% on e85 on 20 psi but that's stock base fuel pressure


Sent from my iPhone using Tapatalk
I stand corrected, no knowledge of E85.

Last edited by Bleakley; 08-09-2015 at 11:22 PM..
Bleakley is offline   Reply With Quote
Old 08-09-2015, 09:51 PM   #3711
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,665
Trader Rating: (17)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 17 reviews
Quote:
Originally Posted by Bleakley View Post
Bullshit, multiple documented cases of 740cc's pushing 400 wheel. If I have to search and edit this post to provide the links I will..
No, not on E85 fuel!

Pump gas, yes
Dboyizmlg is offline   Reply With Quote
Old 08-09-2015, 10:03 PM   #3712
S13alldayyo
Zilvia Addict
 
S13alldayyo's Avatar
 
Join Date: Mar 2012
Location: Florida
Posts: 653
Trader Rating: (3)
S13alldayyo is an unknown quantity at this point
Feedback Score: 3 reviews
E85 bro e85


Sent from my iPhone using Tapatalk
S13alldayyo is offline   Reply With Quote
Old 08-09-2015, 11:23 PM   #3713
Bleakley
Zilvia Addict
 
Join Date: Apr 2011
Location: Near Pittsburgh, PA
Posts: 634
Trader Rating: (1)
Bleakley is an unknown quantity at this point
Feedback Score: 1 reviews
My bad, no knowledge of E-85. I'm surprised you can't. You can push 450-500+ on 93 with Nismo/Tomei/HKS 740's. Surprised you can't hit four hundo on the corn...
Bleakley is offline   Reply With Quote
Old 08-10-2015, 12:08 AM   #3714
S13alldayyo
Zilvia Addict
 
S13alldayyo's Avatar
 
Join Date: Mar 2012
Location: Florida
Posts: 653
Trader Rating: (3)
S13alldayyo is an unknown quantity at this point
Feedback Score: 3 reviews
Remember, e85 is 25-30% more fuel through out the entire map, from idle to redline


Sent from my iPhone using Tapatalk
S13alldayyo is offline   Reply With Quote
Old 08-10-2015, 10:10 AM   #3715
s13drob
Zilvia Addict
 
s13drob's Avatar
 
Join Date: Jan 2008
Location: socal
Posts: 774
Trader Rating: (29)
s13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymore
Feedback Score: 29 reviews
Quote:
Originally Posted by Dboyizmlg View Post
You also have stock intake manifold...? looks like it starts to choke at 6,400 rpm.

I highly suggest a Freddy intake so it wont drop at high rpm.

E85 fuel will be your best friend! For safety reasons, and to achieve more power!!! You should retune on E85 and turn the boost up to 22psi.
You could be at 400whp. Talk to Koji, he will be super glad you are tuning with E85.
Yea Koji suggested that I need e85 and Id1000s. He gave me quite a bit of knowledge and continues to. When I got the car back and it was only 337 I was a little dissapointed until I realized most people are running 93 or e85 and get more power.

Yea I'm running the stock intake manifold but I didn't hear much about choking on other setups. I'll get a Freddy intake to fix that.
s13drob is offline   Reply With Quote
Old 08-10-2015, 10:14 AM   #3716
S13alldayyo
Zilvia Addict
 
S13alldayyo's Avatar
 
Join Date: Mar 2012
Location: Florida
Posts: 653
Trader Rating: (3)
S13alldayyo is an unknown quantity at this point
Feedback Score: 3 reviews
There is a calculater on one of the injector websites I forgot Wich one and it calculates what size injector you would need for what size engine for what power goals so you get the right equipment the first time


Sent from my iPhone using Tapatalk
S13alldayyo is offline   Reply With Quote
Old 08-10-2015, 11:22 AM   #3717
Dboyizmlg
Nissanaholic!
 
Dboyizmlg's Avatar
 
Join Date: Aug 2011
Location: SoCal (I.E.), San Berdino, Colton, Redlands
Posts: 1,665
Trader Rating: (17)
Dboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-knownDboyizmlg is making his/her stupidity well-known
Feedback Score: 17 reviews
Quote:
Originally Posted by s13drob View Post
Yea Koji suggested that I need e85 and Id1000s. He gave me quite a bit of knowledge and continues to. When I got the car back and it was only 337 I was a little dissapointed until I realized most people are running 93 or e85 and get more power.

Yea I'm running the stock intake manifold but I didn't hear much about choking on other setups. I'll get a Freddy intake to fix that.
When I say choking, I mean power starts to drop off after peak power is achieved. On your graph it looks like it starts to drop at 6,400rpm.
If you would have an upgraded intake manifold, it would create more power, in addition it would stay solid till redline.

Your 337whp is on point for 91 octane, as you know Koji tunes very conservative.

Id 1,000cc will max out around 430whp on your sr20, when tuned on E85.
Dboyizmlg is offline   Reply With Quote
Old 08-10-2015, 12:23 PM   #3718
slider2828
Premium Member
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,824
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Its probably the poncams too that is choking it a little. Fun on the street though I bet...
__________________
Turn and Burn!
slider2828 is offline   Reply With Quote
Old 08-10-2015, 06:17 PM   #3719
s13drob
Zilvia Addict
 
s13drob's Avatar
 
Join Date: Jan 2008
Location: socal
Posts: 774
Trader Rating: (29)
s13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymore
Feedback Score: 29 reviews
Quote:
Originally Posted by Dboyizmlg View Post
When I say choking, I mean power starts to drop off after peak power is achieved. On your graph it looks like it starts to drop at 6,400rpm.
If you would have an upgraded intake manifold, it would create more power, in addition it would stay solid till redline.

Your 337whp is on point for 91 octane, as you know Koji tunes very conservative.

Id 1,000cc will max out around 430whp on your sr20, when tuned on E85.
Yea i understand. I assumed it was more of the pon cams causing the drop off more than the intake manifold. Thanks for the advice.

So how does my gtx dyno graph compare to a 2871r on 91 at around the same boost? I've searched through a few pages and it looks like my torque/rpm levels are lower. I'm not sure if they were on e85.
s13drob is offline   Reply With Quote
Old 08-10-2015, 06:18 PM   #3720
s13drob
Zilvia Addict
 
s13drob's Avatar
 
Join Date: Jan 2008
Location: socal
Posts: 774
Trader Rating: (29)
s13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymores13drob is not welcome here anymore
Feedback Score: 29 reviews
Quote:
Originally Posted by slider2828 View Post
Its probably the poncams too that is choking it a little. Fun on the street though I bet...
Yea it is pretty fun. I can't wait for a decent tire setup to get much needed traction.
s13drob is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™