Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 04-24-2007, 05:24 AM   #1
street240
Zilvia Junkie
 
street240's Avatar
 
Join Date: Jan 2007
Location: Rapid
Posts: 502
Trader Rating: (0)
street240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nice
Feedback Score: 0 reviews
Emance Rom Tune Answers

There has been some speculation surrounding Emance performance rom tunes. I am referring to this thread-http://www.zilvia.net/f/showthread.php?t=140162-. I said that I would contact the tuner bring him (he was actually a member) on here to clear up some misconceptions and answer Zilvia member questions. I get tired of reading posts from people who have not even tried one. Feel free to fire off any questions you guys may have on the Rom tunes in question.
__________________
The Gallo 24 would be a better motor for my skyline...But I am waiting on the swap dvd...
street240 is offline   Reply With Quote
Sponsored Links
Old 04-24-2007, 05:29 AM   #2
street240
Zilvia Junkie
 
street240's Avatar
 
Join Date: Jan 2007
Location: Rapid
Posts: 502
Trader Rating: (0)
street240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nice
Feedback Score: 0 reviews
1.why are the rom tunes so cheap?
2.have your tunes been dyno or at least knock tested?
3.what do you wot afrs look like?
4.anyone you have tuned for that we might know?
5.what setups can you tune for?
__________________
The Gallo 24 would be a better motor for my skyline...But I am waiting on the swap dvd...
street240 is offline   Reply With Quote
Old 04-24-2007, 11:15 AM   #3
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
Hello, this is Jason, owner of Emance LLC.

I see you have a few questions in reguards to our tunes.

1. You ask why the tunes are so cheap? i ask why does everyone else charge so damn much?? i suppose if you want to spend $500 you could, but i am not trying to make a million dollars, i am trying to help the poor 240 owners which i was when i first started on my 240 in college at 19.

2. Yes our tunes have been tested on dyno and or wideband. we also have knock lights installed on cars we tune to make our base tunes.

3. a/f's are around 14.5 (loopback mode) on idle and at WOT they are around 11.5-11.8 (you can customize this)

4. I dont know if they are on zilvia, but i have tuned for a lot of local people to me in san diego, in fact, if anyone reading this lives in san diego, i'd show them my tune, we could install one in their car for a very low cost as long as they wrote a report here on zilvia.

5. I have tuned very high compression ka's, sr20det redtop/blacktops, z32 na and tt, and my personal favorate KA-T. if anyone also lives local to san diego, i can show how well the tunes work on my 500whp ka-t. just converted it to E85, man does that fuel love timing!

so in short, if you are trying to tune a common turbo setup sr20 or ka-t, i can tune for most turbos as long as they have a compressor map, i have successfully tuned for up to 100lb injectors. as long as you have an s13 or at least a conversion harness for s14/s15 to run a s13 ecu (i have a write up how to make one), you can take advantage of my tunes.

hope this helps you guys out.

Quote:
Originally Posted by street240 View Post
1.why are the rom tunes so cheap?
2.have your tunes been dyno or at least knock tested?
3.what do you wot afrs look like?
4.anyone you have tuned for that we might know?
5.what setups can you tune for?
nosajton is offline   Reply With Quote
Old 05-14-2007, 01:01 PM   #4
steve shadows
Post Whore!
 
steve shadows's Avatar
 
Join Date: Aug 2003
Location: LA and OC
Posts: 8,202
Trader Rating: (5)
steve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to steve shadows
Quote:
2. Yes our tunes have been tested on dyno and or wideband. we also have knock lights installed on cars we tune to make our base tunes.
the stock knock sensor is useless.

anyone using it as a base for saftey or tune is not a tuner I would trust.

please clarify what you mean by this.

Do you have access to a personal/company dynometer? or outsource?

Why not tune every car on the dynometer one by one? The power possibilties would be much higher and tune much better especially for midigating tuning effects of Cali gas and other influences.

just curious
__________________
Like Me on FaceBook !
steve shadows is offline   Reply With Quote
Old 05-14-2007, 07:19 PM   #5
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
all our base maps are dynotuned.

for fine tuning we use turboxs knock lites (google it) and the bosch knock sensor turboxs recommends. it works beautifully it is so powerful it even detects mild knock. i advance/retard timing so there is not even mild knock (naked ear cant hear it)

we could dyno tune cars one by one if you live local to san diego and are willing to pay. but for most people, or base tune will make you happy.

Quote:
Originally Posted by steve shadows View Post
the stock knock sensor is useless.

anyone using it as a base for saftey or tune is not a tuner I would trust.

please clarify what you mean by this.

Do you have access to a personal/company dynometer? or outsource?

Why not tune every car on the dynometer one by one? The power possibilties would be much higher and tune much better especially for midigating tuning effects of Cali gas and other influences.

just curious
nosajton is offline   Reply With Quote
Old 05-15-2007, 01:21 AM   #6
steve shadows
Post Whore!
 
steve shadows's Avatar
 
Join Date: Aug 2003
Location: LA and OC
Posts: 8,202
Trader Rating: (5)
steve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfectionsteve shadows is close to perfection
Feedback Score: 5 reviews
Send a message via AIM to steve shadows
yeah using a light to tune for knock is not my fortay but i suppose it could work in a pinch.

If i could data log the input from the sensor the knock lite unit uses then i might pick one up in the near future.

im fine (tune my own goodies and others ems') but im sure there are people who arent willing to go standalone and could use your services.

there is quite a meaningless monopoly on tuning in cali regarding stuff like this the more smaller people start up the easier it makes it for me to get some legitimacy as well, at least in the short term.

cheers
__________________
Like Me on FaceBook !
steve shadows is offline   Reply With Quote
Old 03-08-2011, 11:03 PM   #7
cbrowning89
 
cbrowning89's Avatar
 
Join Date: Mar 2011
Location: flowermound ,tx
Age: 32
Posts: 1
Trader Rating: (0)
cbrowning89 is an unknown quantity at this point
Feedback Score: 0 reviews
Hey if you are the owner mabey u can answer my question.. I purchased one of your cables
For my rb25 in my 240 and wired it into my ecu the way I was instructed to. However .. no matter what I do or how hard I try. Or what computer I am using , I cannot get the computer to recognize the interfacer. And yes I do have a computer capable of running a serial to usb adapter. Soooo. whats the problem? Why won't this work?
cbrowning89 is offline   Reply With Quote
Old 03-09-2011, 02:46 AM   #8
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
Quote:
Originally Posted by cbrowning89 View Post
Hey if you are the owner mabey u can answer my question.. I purchased one of your cables
For my rb25 in my 240 and wired it into my ecu the way I was instructed to. However .. no matter what I do or how hard I try. Or what computer I am using , I cannot get the computer to recognize the interfacer. And yes I do have a computer capable of running a serial to usb adapter. Soooo. whats the problem? Why won't this work?
pm me we'll figure it out most of the time if it is a swap the consult wires arent hooked up right.
__________________
04 G35, Kinetix Plenum, Borla Ext, JWT Intake, custom ETG ECU Reflash.
nosajton is offline   Reply With Quote
Old 03-09-2011, 11:12 AM   #9
Nick_04K
Zilvia Junkie
 
Nick_04K's Avatar
 
Join Date: Jun 2010
Location: Vernal, UT
Age: 27
Posts: 467
Trader Rating: (0)
Nick_04K is an unknown quantity at this point
Feedback Score: 0 reviews
It's nice to see your still on here. I have read all the good and bad reviews for emance....And am still considering you for tuning. The fact your on the board and still helping people work through problems will most likely influence my decision alot.
Nick_04K is offline   Reply With Quote
Old 04-24-2007, 11:34 AM   #10
fromxtor
Post Whore!
 
fromxtor's Avatar
 
Join Date: Aug 2005
Location: NC
Age: 40
Posts: 3,012
Trader Rating: (23)
fromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfection
Feedback Score: 23 reviews
Send a message via AIM to fromxtor Send a message via Yahoo to fromxtor
Are you tuning SOHC Ka-ts?
__________________
Seller feedback>>http://www.zilvia.net/f/showthread.p...light=fromxtor
fromxtor is offline   Reply With Quote
Old 04-24-2007, 04:11 PM   #11
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
Quote:
Originally Posted by fromxtor View Post
Are you tuning SOHC Ka-ts?
yes i do tune sohc ka-t's as a matter of fact my buddy is running one at the local scca. he's running a gt28rs and he's always in #1 or #2 place in his class. i think he drives crazy though
nosajton is offline   Reply With Quote
Old 04-24-2007, 04:50 PM   #12
timtiminy
Zilvia Addict
 
timtiminy's Avatar
 
Join Date: Feb 2006
Location: Socal
Posts: 624
Trader Rating: (0)
timtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the rough
Feedback Score: 0 reviews
Send a message via AIM to timtiminy
Nosajton:
1)I am within driving distance of san diego. Could i possibly get a base tune for my setup from you then drive down there and have you fine tune my 240 on a dyno?
2)how much would you charge for something like this?
3)would you be able to fine tune, if I send you a dyno plot with air/fuel at a few different boost settings? I know this is something enthalpy offers.
4)I have heard that there is a possibiliy that your daughterboard quality is inferior to many other daughterboards. That it doesn't even have moisture protective coat and the circuit board is of cheap materials. This results in the cheap prices. Being able to do this for much cheaper because of the lack of quality in electronic components such as capacitors, resistors, and/or eeprom/flash chips. Is this just someones speculation or is there truth/partial truth in this statement? Tell us about the quality of the hardware of your system.

Thank you!
timtiminy is offline   Reply With Quote
Old 04-24-2007, 07:14 PM   #13
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
1) 2) I pm'd you about getting your car tuned by us.
3) yes, if you have a dyno plot/sheet it will greatly help us.
4) our daughterboards have a life expectancy of 10 years, per manufacture.

anyhow, i warranty your tune for the life of it. if anything happends, i will fix it for free. there are no resistors on our daughterboards. the capacitors we use are Kemet and are known for their superior components. our chips are texas instruments the best out there. the flash chips are amtel or sst just to clear up the 'speculation' this statement is nonsense, whoever is telling you our quality is poor really does not know much about electronics.
Quote:
Originally Posted by timtiminy View Post
Nosajton:
1)I am within driving distance of san diego. Could i possibly get a base tune for my setup from you then drive down there and have you fine tune my 240 on a dyno?
2)how much would you charge for something like this?
3)would you be able to fine tune, if I send you a dyno plot with air/fuel at a few different boost settings? I know this is something enthalpy offers.
4)I have heard that there is a possibiliy that your daughterboard quality is inferior to many other daughterboards. That it doesn't even have moisture protective coat and the circuit board is of cheap materials. This results in the cheap prices. Being able to do this for much cheaper because of the lack of quality in electronic components such as capacitors, resistors, and/or eeprom/flash chips. Is this just someones speculation or is there truth/partial truth in this statement? Tell us about the quality of the hardware of your system.

Thank you!
nosajton is offline   Reply With Quote
Old 04-24-2007, 07:39 PM   #14
fromxtor
Post Whore!
 
fromxtor's Avatar
 
Join Date: Aug 2005
Location: NC
Age: 40
Posts: 3,012
Trader Rating: (23)
fromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfectionfromxtor is close to perfection
Feedback Score: 23 reviews
Send a message via AIM to fromxtor Send a message via Yahoo to fromxtor
Nosa PM me about a KAET rom tune
__________________
Seller feedback>>http://www.zilvia.net/f/showthread.p...light=fromxtor
fromxtor is offline   Reply With Quote
Old 04-24-2007, 08:12 PM   #15
johngriff
Post Whore!
 
johngriff's Avatar
 
Join Date: Jun 2004
Location: Long Beach, CA
Posts: 4,103
Trader Rating: (4)
johngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfectionjohngriff is close to perfection
Feedback Score: 4 reviews
Send a message via AIM to johngriff
What type of dyno are you using?

Can you tune 8 bit ecu's like the ca18det?

Can you change coil dwell time?
__________________
[email protected]
johngriff is offline   Reply With Quote
Old 04-24-2007, 10:49 PM   #16
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
Quote:
Originally Posted by johngriff View Post
What type of dyno are you using?

Can you tune 8 bit ecu's like the ca18det?

Can you change coil dwell time?
sure can tune ca18det. what code ecu you got?

yes we can change coil dwell time but we dont really recommend playing with it too much because you can burn your coil
nosajton is offline   Reply With Quote
Old 04-24-2007, 10:02 PM   #17
street240
Zilvia Junkie
 
street240's Avatar
 
Join Date: Jan 2007
Location: Rapid
Posts: 502
Trader Rating: (0)
street240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nice
Feedback Score: 0 reviews
Im looking at a tune for sr/z32/740/2871 combo. Is that one supported and can you tune for s3 cams?
__________________
The Gallo 24 would be a better motor for my skyline...But I am waiting on the swap dvd...
street240 is offline   Reply With Quote
Old 04-24-2007, 10:50 PM   #18
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
Quote:
Originally Posted by street240 View Post
Im looking at a tune for sr/z32/740/2871 combo. Is that one supported and can you tune for s3 cams?
do you have a dyno chart for the s3 cams? i am sure i can tune for it.
nosajton is offline   Reply With Quote
Old 04-25-2007, 10:47 AM   #19
timtiminy
Zilvia Addict
 
timtiminy's Avatar
 
Join Date: Feb 2006
Location: Socal
Posts: 624
Trader Rating: (0)
timtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the roughtimtiminy is a jewel in the rough
Feedback Score: 0 reviews
Send a message via AIM to timtiminy
nosajton, Thanks for the pm, i will be getting back to you shortly. thanks for answering all my questions and being forward about everything. I think you will be a great asset to the zilvia.net community. Thanks for coming on here and answering questions and whatnot. pm sent
timtiminy is offline   Reply With Quote
Old 04-26-2007, 12:51 PM   #20
Chrischeezer
Zilvia FREAK!
 
Join Date: Jul 2005
Location: earth
Age: 37
Posts: 1,406
Trader Rating: (2)
Chrischeezer is a jewel in the roughChrischeezer is a jewel in the roughChrischeezer is a jewel in the roughChrischeezer is a jewel in the roughChrischeezer is a jewel in the roughChrischeezer is a jewel in the roughChrischeezer is a jewel in the rough
Feedback Score: 2 reviews
Is this the same as the Eformance that is advertised on ebay?

if so, i have an ECU being done by them right now..
__________________
Chrischeezer is offline   Reply With Quote
Old 04-26-2007, 04:12 PM   #21
street240
Zilvia Junkie
 
street240's Avatar
 
Join Date: Jan 2007
Location: Rapid
Posts: 502
Trader Rating: (0)
street240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nice
Feedback Score: 0 reviews
Yeah it is the same guy
__________________
The Gallo 24 would be a better motor for my skyline...But I am waiting on the swap dvd...
street240 is offline   Reply With Quote
Old 04-30-2007, 09:15 AM   #22
P10
 
Join Date: Apr 2007
Location: sd
Posts: 1
Trader Rating: (0)
P10 can only hope to improve
Feedback Score: 0 reviews
So yesterday Jason came out to my house to tune my KA, a '91 n/a setup inside a '71 Datsun 510. I actually didnt hear about him here or at ka-t.org but emailed him off of Craigslist (I could tell from the KA parts he was selling that he was not a 'normal' 240 guy).

This guy is easily the most knowledgeable KA tech I've ever met. I had a few ghetto-rig problems, he diagnosed, pinpointed and fixed before even getting started on the actual tune. I don't have the most exciting setup, just headers, intake and full exhaust, but he did what he needed to do, and now? Engine purrs perfectly, as far as power and torque, definitely noticed a difference in almost any situation, street or freeway. He even accepted my core ecu, which had old Pokez salsa spilled on it ().

If you're a local and he's got the time, you'd be stupid to not have him tweak your rig. Thanks again Jason! And BTW, after riding with you in your beast of a 240, I gotta say it's faster than a motherfucker. Easily would take my roommates 2006 STI, which is both hilarious and sad.
P10 is offline   Reply With Quote
Old 04-30-2007, 04:36 PM   #23
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
Thanks Eric, I hope you enjoy your datsun! if/when you're ready to turbo it, give me a call, i'll hook you up. with that car you wont need a huge turbo. a nice sr t25 will get you about 280whp or t28 will get you past the 300 mark.

btw, just turned the boost up a little more on my 240. going to dyno it tomorrow. i'll post the results on here.

Quote:
Originally Posted by P10 View Post
So yesterday Jason came out to my house to tune my KA, a '91 n/a setup inside a '71 Datsun 510. I actually didnt hear about him here or at ka-t.org but emailed him off of Craigslist (I could tell from the KA parts he was selling that he was not a 'normal' 240 guy).

This guy is easily the most knowledgeable KA tech I've ever met. I had a few ghetto-rig problems, he diagnosed, pinpointed and fixed before even getting started on the actual tune. I don't have the most exciting setup, just headers, intake and full exhaust, but he did what he needed to do, and now? Engine purrs perfectly, as far as power and torque, definitely noticed a difference in almost any situation, street or freeway. He even accepted my core ecu, which had old Pokez salsa spilled on it ().

If you're a local and he's got the time, you'd be stupid to not have him tweak your rig. Thanks again Jason! And BTW, after riding with you in your beast of a 240, I gotta say it's faster than a motherfucker. Easily would take my roommates 2006 STI, which is both hilarious and sad.
nosajton is offline   Reply With Quote
Old 04-30-2007, 01:12 PM   #24
street240
Zilvia Junkie
 
street240's Avatar
 
Join Date: Jan 2007
Location: Rapid
Posts: 502
Trader Rating: (0)
street240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nice
Feedback Score: 0 reviews
Thanks for the update. Everyone always forgets to report back.
__________________
The Gallo 24 would be a better motor for my skyline...But I am waiting on the swap dvd...
street240 is offline   Reply With Quote
Old 04-30-2007, 03:06 PM   #25
Rockogtr
Zilvia Member
 
Join Date: Feb 2006
Location: mass
Age: 35
Posts: 182
Trader Rating: (1)
Rockogtr is a jewel in the roughRockogtr is a jewel in the roughRockogtr is a jewel in the roughRockogtr is a jewel in the roughRockogtr is a jewel in the roughRockogtr is a jewel in the roughRockogtr is a jewel in the roughRockogtr is a jewel in the rough
Feedback Score: 1 reviews
Send a message via AIM to Rockogtr
i pm'd him about my set up and im waiting to hear back ...my stock turbo is out and by the weekend i should have the gt2871r in with the new mani and elbow all im gonna need is some injectors but im not sure if i should go with 740's or 650's...
Rockogtr is offline   Reply With Quote
Old 04-30-2007, 03:12 PM   #26
street240
Zilvia Junkie
 
street240's Avatar
 
Join Date: Jan 2007
Location: Rapid
Posts: 502
Trader Rating: (0)
street240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nicestreet240 is just really nice
Feedback Score: 0 reviews
You could do 650's, but if you go 740 they will most likely be the last set you ever buy.
__________________
The Gallo 24 would be a better motor for my skyline...But I am waiting on the swap dvd...
street240 is offline   Reply With Quote
Old 04-30-2007, 03:52 PM   #27
S14DB
AFC #1
 
S14DB's Avatar
 
Join Date: Oct 2003
Location: 昨晩あなたのお母さんの家
Posts: 20,181
Trader Rating: (3)
S14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfection
Feedback Score: 3 reviews
Did you create the base tunes or did you get them from another source?
__________________
Comments should be taken as Opinions not as Statements of Fact
S14DB is offline   Reply With Quote
Old 04-30-2007, 04:38 PM   #28
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
all of my tunes are done by me. not another source. i have learned from some of the best tuners, but it is my original work.

Quote:
Originally Posted by S14DB View Post
Did you create the base tunes or did you get them from another source?
nosajton is offline   Reply With Quote
Old 06-16-2007, 01:56 PM   #29
nelson8708
 
nelson8708's Avatar
 
Join Date: Jul 2006
Location: Indiana
Posts: 27
Trader Rating: (0)
nelson8708 is making a name for him/her selfnelson8708 is making a name for him/her self
Feedback Score: 0 reviews
Thumbs down

Quote:
Originally Posted by nosajton View Post
all of my tunes are done by me. not another source. i have learned from some of the best tuners, but it is my original work.
That is not true. I purchased a tune from you for the sohc ka and it is identical to the develish stage 3 N/A tune on the hybridka forum. I paid 50$ for something i already had for free. Wont make that mistake agian. Copied his tune and sold it as your own.....
__________________
KA24E-T boosted for one year now.
nelson8708 is offline   Reply With Quote
Old 06-17-2007, 04:57 PM   #30
nosajton
Zilvia Junkie
 
Join Date: Jul 2006
Location: San Diego
Posts: 392
Trader Rating: (10)
nosajton is on a distinguished road
Feedback Score: 10 reviews
Quote:
Originally Posted by nelson8708 View Post
That is not true. I purchased a tune from you for the sohc ka and it is identical to the develish stage 3 N/A tune on the hybridka forum. I paid 50$ for something i already had for free. Wont make that mistake agian. Copied his tune and sold it as your own.....

there was one tune over 18 months ago that a collegue of mine said he made for the sohc. devious brought it to my attention that it resembled his tune and we immediately cut ties with that person and stopped selling that tune.

you can even ask devious about this. this is old news.
nosajton is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™