Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > Specific Topics > Archive and FAQs

Archive and FAQs Archives and Frequently Asked Questions about the 240SX are in here.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-24-2007, 08:17 PM   #1
Phlip
Custom administrator user text
 
Phlip's Avatar
 
Join Date: Sep 2002
Location: In my supervillain's lair
Posts: 27,850
Trader Rating: (19)
Phlip is close to perfectionPhlip is close to perfectionPhlip is close to perfectionPhlip is close to perfectionPhlip is close to perfectionPhlip is close to perfectionPhlip is close to perfectionPhlip is close to perfectionPhlip is close to perfectionPhlip is close to perfectionPhlip is close to perfection
Feedback Score: 19 reviews
Custom exhaustedness

I am presenting this as a VERY high-level overview, in response to PM/IM/frequent posts requesting components...
The starting point, for the application, would be the resonator, should feel so inclined to use one. I did, and the one I did was ordered from Summit Racing, part number WLK-24222, find it on their site here:
http://store.summitracing.com/partde...5&autoview=sku
... yes, it is 3" in and out, and is streamlined enough to not be huge and fuckin cumbersome in the system...

Next comes the rear muffler and, in such, will be required creativity, not to mention the application of subjectivity. Go with what you like, personally I was looking for a 3" in and twin 2.5" outs, I went with this guy here, part number WLK-17674:
http://store.summitracing.com/partde...0&autoview=sku

(by my math, at this point, I have spent $89.83 in mufflers, no tax and shipping is free)

All of my components to this place have been DynoMaxx, and that is what I personally suggest, based upon my own personal experience. I call into question a post I made back in April of last year about the whole presentation:
Quote:
... I asked to have it sit far enough in to appear stockish:

3" piping from (and including a new) cat back please ignore that my old muffler did a number on my bumper:

nice coating of 1200 degree hi-temp black before I took it to the shop, but welding kinda scuffed that a little:

a pic to allow one to see it on the car from distance:

snapped a couple while still on the lift:

guy that did it, whose head you can see in the left corner here, went behind himself and went over the welds with hi-temp silver, apparently he cares what his work looks like:

I guesstimate the lowest point in the system to be about 4-5" inches off of the ground, but I have short arms and can't reach that far to measure:

... yes, my system is crush-bent.
... yes, I could have gone somewhere else and paid for mandrel bending, but wouldn't that have been a bit spendy?
I am BEYOND pleased with the sound, and it is an application that can be EASILY duplicated/taken as inspiration and used for something different. Your own choice of the rear muffler/piping length will fall purely into the hands of your own opinion, but I WILL toss up a couple ideas:
1 - be wary of longer-length mufflers, given the amount of space you're provided to work with and location of youg fuel tank, especially if you own an S13:
http://store.summitracing.com/partde...5&autoview=sku
(Magnaflow, Summit P/N MPE-12198)
http://store.summitracing.com/partde...5&autoview=sku
(Borla, Summit P/N BOR-40943)

... remember that some of the items one may find as "prohibitive" in these cases will be the cost, at some point it will become more worth it to just BUY an exhaust. Feel free to shop about the internets and make an informed consumer decision before throwing money away, and look at the tips that your local shop has right there, they may have something that you like for dirt cheap. Me? I found my own at vato zone a block away while I walked to get the cash from the ATM while he welded mine.
The beauty of the application is the infinite possibilities, and God knows I hope that my presentation proves helpful for information's purpose.
__________________
Quote:
Originally Posted by Ignignokt
"Getting it is easy... filling it with illegal substances and sending it across the border is not."
And I write too!
Phlip is offline  
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:54 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™