92 s13 OEM restore + kouki aero - Page 3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Bullitt_180sx · 11-29-2014, 10:54 AM

What is the part number on the front emblem?

DILLONDILLONDILLON! · 11-29-2014, 11:15 AM

Quote:

Originally Posted by Bullitt_180sx

What is the part number on the front emblem?

The front emblem from the 180sx was no longer available.
I talked to Scott at Nismo and he let me know that the
OEM 240sx emblem is the same,
only thing that needed to be done was.

A. make provisions for the screw and mounting tab

B. remove the tab and screw tab with a small dremel tool.

I opted to remove them rather then cut into new paint.
The hold is fine with the 3m product that comes with it
stock oem part number is 62890-51F00
its aboout 42$

solo_ryder · 11-29-2014, 11:30 AM

Great looking car, really like that you kept it clean, OEM and not bagged like most of the other s chassis around

Bullitt_180sx · 11-29-2014, 11:53 AM

Quote:

Originally Posted by DILLONDILLONDILLON!

The front emblem from the 180sx was no longer available.
I talked to Scott at Nismo and he let me know that the
OEM 240sx emblem is the same,
only thing that needed to be done was.

A. make provisions for the screw and mounting tab

B. remove the tab and screw tab with a small dremel tool.

I opted to remove them rather then cut into new paint.
The hold is fine with the 3m product that comes with it
stock oem part number is 62890-51F00
its aboout 42$

They are not the same, this is common misinformation. I had to search for someone selling one to test this theory. Below are photos of both the OEM kouki emblem and OEM 240sx emblem. You can see how the kouki emblem matches the indentation in the bumper whereas the 240sx emblem is smaller and doesn't match the contours.

First the kouki emblem

240sx emblem

As soon as I find one of my older posts, I'll be able to let you know where you can get a new one.

DILLONDILLONDILLON! · 11-29-2014, 12:05 PM

Quote:

Originally Posted by solo_ryder

Great looking car, really like that you kept it clean, OEM and not bagged like most of the other s chassis around

Thanks dude. i do need to raise it a hair up front.
only thing tat would fit was the Technicians time card at work =x
will do that sometime next week when i have off.
Also will be getting security system and keyless entry installed.
By that time the other oem parts will be in and the wing hopefully will be
painted and installed

DILLONDILLONDILLON! · 11-29-2014, 12:08 PM

Yeah man that would be awesome if you do find that
i really was hoping id be able to get the kouki emblem.
Just hoping its still in productionthe 240sx one
doesnt look half bad when i did mine
but the picture you have makes it look like poop lol

Bullitt_180sx · 11-29-2014, 12:29 PM

Quote:

Originally Posted by DILLONDILLONDILLON!

Yeah man that would be awesome if you do find that
i really was hoping id be able to get the kouki emblem.
Just hoping its still in productionthe 240sx one
doesnt look half bad when i did mine
but the picture you have makes it look like poop lol

It's in here somewhere.

http://zilvia.net/f/showthread.php?t=467195

It's also the same as a 1994-1996 maxima FYI.

DILLONDILLONDILLON! · 11-29-2014, 12:39 PM

Alright yeah the part # works for my system so it is available thre nissan usa.
That is the same part # that i purchased thats for the 240sx unfortunately
and will not be like the 180sx emblem that you showed in your post. =/
I can't complain and bitch to nismo yet till monday..
I do however have someone from japan who might be able to find it
for me !!=]
the kouki emblem is 62890 31U00
sorry about that didnt read it fully

DILLONDILLONDILLON! · 11-29-2014, 12:46 PM

OKS lol did some more part CROSS. REF.
the part number 62890-31U00 which supposedly
fit the kouki 180sx front bumper is from a A32B (MAXIMA)
or a B14X (SENTRA) . They will fit the bumper alittle better but
not 100% thats the original part number.

DILLONDILLONDILLON! · 11-29-2014, 01:01 PM

Quote:

Originally Posted by Bullitt_180sx

It's in here somewhere.

http://zilvia.net/f/showthread.php?t=467195

It's also the same as a 1994-1996 maxima FYI.

Thanks dude im going to order one up looks like ther are only 9 left
so im going to see how it looks and maybe replace it

kudos for the help!

QX8C · 11-29-2014, 01:23 PM

Nice car man it looks dope, clean, and love the color. How much was that paint job?

Hoonigan19 · 11-29-2014, 02:50 PM

wow, so jealous, clean 240!

DILLONDILLONDILLON! · 11-29-2014, 03:02 PM

Should have some more part updates next week getting my door moldings and rear marker lights hopefully the wing comes in and ill take it to paint and get it installed !

A54 · 11-29-2014, 05:43 PM

Excellent Thread! 5 stars.....

DILLONDILLONDILLON! · 11-30-2014, 11:29 AM

Had some time this weekend to install dome small parts that I got in at work
last week.

new door moldings

I had the raise the front up about half an inch because it was rubbing was
thinking id get away with alil more camber but this worked fine.

more shit next week lol

future · 11-30-2014, 12:18 PM

So pretty

.....

Bushido · 11-30-2014, 01:18 PM

cool car, man.

Almighty So · 11-30-2014, 07:39 PM

ride height looks fine to me.
with all this overall goodness that has taken place so far, i'm excited to see what wheels you're going with.

yes i'm inferring that you're not allowed to keep the current set up.
too much balling happening for that.

DILLONDILLONDILLON! · 11-30-2014, 09:27 PM

Quote:

Originally Posted by Almighty So

ride height looks fine to me.
with all this overall goodness that has taken place so far, i'm excited to see what wheels you're going with.

yes i'm inferring that you're not allowed to keep the current set up.
too much balling happening for that.

Hahaha damm you ! Deftly in the works my friend .
Im trying to save up for that not too sure what I want yet
any ideas ??

Almighty So · 12-01-2014, 05:46 AM

Quote:

Originally Posted by DILLONDILLONDILLON!

any ideas ??

i'll answer that question with blitz 03's nine times out of ten.
but i'm kinda biased.
R33's would be pretty damn cool on this thing though..

DILLONDILLONDILLON! · 12-02-2014, 04:29 PM

Small Update today !
received my pass side door molding and emblem.
Have also decided what im going to do for plans on rims.

i will test fitment of the new front emblem .
It has to small mounting tabs i will most likely remove
the 3m double sided tape goes fully arounnd the whole
emblem unlike the stock 240sx emblem. should have my
type x wing in tommorrow and i will send it out to paint!

KoukiMonsta · 12-02-2014, 05:37 PM

dem headlight surrounds

cool build, keep it up

Almighty So · 12-02-2014, 10:31 PM

Quote:

Originally Posted by DILLONDILLONDILLON!

Have also decided what im going to do for plans on rims.

Don't leave me hangin' like that..

DILLONDILLONDILLON! · 12-03-2014, 10:56 AM

Hey guys!! so kinda a big UPDATE for me =]
recieved my type X wing Brand new OEM.
I will be bringing it to paint ASAP!
It has all the mounting hardware
No japanese instructions lol or templates but
Im sure i will be able to make one up for future use or if anyone needs it!

SWEET JESUS!!

future · 12-03-2014, 11:39 AM

Sweet baby Jesus

forgotten · 12-03-2014, 01:37 PM

Lookes awsome man, love the details

Nissan love!

*TheRealSy90* · 12-03-2014, 03:04 PM

I have to ask what somehow nobody has asked...

Why the hell didn't you do 180sx quarter glass after you already had the stock glass out, you have the hookup at the dealership etc to order them brand new or find good ones, AND you're already doing all the other Kouki 180sx parts, so that's the ONE thing that you don't have... It's kind of a shame lol.

Other than that, props on the build! It looks amazing. I wish I could do the same...

DILLONDILLONDILLON! · 12-03-2014, 03:19 PM

Quote:

Originally Posted by TheRealSy90

I have to ask what somehow nobody has asked...

Why the hell didn't you do 180sx quarter glass after you already had the stock glass out, you have the hookup at the dealership etc to order them brand new or find good ones, AND you're already doing all the other Kouki 180sx parts, so that's the ONE thing that you don't have... It's kind of a shame lol.

Other than that, props on the build! It looks amazing. I wish I could do the same...

Yeah i thought about it. At the same time then i should probably get 180sx seats and do a rhd conversion lol
If its in the cards maybe later down the line i will get them but because mine were fine. didnt see the need to replace them.
BTW. if you needed the part # for those glass pieces
LH side 83301-47F01
RH side 83300-47F01
Thats for models from JAN 95- DEC 98
not sure if nismo has them

*TheRealSy90* · 12-03-2014, 04:57 PM

Yes, yes you should get 180sx seats, brand new ones from Nissan! Or used ones with brand new covers? Haha.

DILLONDILLONDILLON! · 12-03-2014, 05:39 PM

Quote:

Originally Posted by TheRealSy90

Yes, yes you should get 180sx seats, brand new ones from Nissan! Or used ones with brand new covers? Haha.

Xmas is coming soon and I have a great lead from a zilvia member for those seats

.. I doubt nissan still has them lol if there was a part number for a full seat I'd check thought lol most times it's separate in 3 pieces or more

11-29-2014, 12:08 PM	#66
DILLONDILLONDILLON! Zilvia Member Join Date: Dec 2013 Location: new jersey Age: 30 Posts: 206 Trader Rating: (2) Feedback Score: 2 reviews	Yeah man that would be awesome if you do find that i really was hoping id be able to get the kouki emblem. Just hoping its still in productionthe 240sx one doesnt look half bad when i did mine but the picture you have makes it look like poop lol __________________ http://springfieldnissan.com/

11-29-2014, 12:39 PM	#68
DILLONDILLONDILLON! Zilvia Member Join Date: Dec 2013 Location: new jersey Age: 30 Posts: 206 Trader Rating: (2) Feedback Score: 2 reviews	Alright yeah the part # works for my system so it is available thre nissan usa. That is the same part # that i purchased thats for the 240sx unfortunately and will not be like the 180sx emblem that you showed in your post. =/ I can't complain and bitch to nismo yet till monday.. I do however have someone from japan who might be able to find it for me !!=] the kouki emblem is 62890 31U00 sorry about that didnt read it fully __________________ http://springfieldnissan.com/ Last edited by DILLONDILLONDILLON!; 11-29-2014 at 12:41 PM.. Reason: stupidity

11-29-2014, 12:46 PM	#69
DILLONDILLONDILLON! Zilvia Member Join Date: Dec 2013 Location: new jersey Age: 30 Posts: 206 Trader Rating: (2) Feedback Score: 2 reviews	OKS lol did some more part CROSS. REF. the part number 62890-31U00 which supposedly fit the kouki 180sx front bumper is from a A32B (MAXIMA) or a B14X (SENTRA) . They will fit the bumper alittle better but not 100% thats the original part number. __________________ http://springfieldnissan.com/

11-29-2014, 03:02 PM	#73
DILLONDILLONDILLON! Zilvia Member Join Date: Dec 2013 Location: new jersey Age: 30 Posts: 206 Trader Rating: (2) Feedback Score: 2 reviews	Should have some more part updates next week getting my door moldings and rear marker lights hopefully the wing comes in and ill take it to paint and get it installed ! __________________ http://springfieldnissan.com/

11-30-2014, 11:29 AM	#75
DILLONDILLONDILLON! Zilvia Member Join Date: Dec 2013 Location: new jersey Age: 30 Posts: 206 Trader Rating: (2) Feedback Score: 2 reviews	Had some time this weekend to install dome small parts that I got in at work last week. new door moldings I had the raise the front up about half an inch because it was rubbing was thinking id get away with alil more camber but this worked fine. more shit next week lol __________________ http://springfieldnissan.com/

11-29-2014, 10:54 AM	#61
Bullitt_180sx Zilvia Addict Join Date: Sep 2010 Location: Florida Age: 36 Posts: 631 Trader Rating: (4) Feedback Score: 4 reviews	What is the part number on the front emblem?

11-29-2014, 11:30 AM	#63
solo_ryder Zilvia Junkie Join Date: Mar 2011 Location: The True North Posts: 529 Trader Rating: (18) Feedback Score: 18 reviews	Great looking car, really like that you kept it clean, OEM and not bagged like most of the other s chassis around

11-29-2014, 01:23 PM	#71
QX8C Join Date: Oct 2014 Location: Richardson, TX Posts: 6 Trader Rating: (0) Feedback Score: 0 reviews	Nice car man it looks dope, clean, and love the color. How much was that paint job?

11-29-2014, 02:50 PM	#72
Hoonigan19 Leaky Injector Join Date: Feb 2013 Location: Alberta Posts: 97 Trader Rating: (0) Feedback Score: 0 reviews	wow, so jealous, clean 240!

11-29-2014, 05:43 PM	#74
A54 Zilvia Member Join Date: Jan 2008 Location: Norcal Posts: 273 Trader Rating: (40) Feedback Score: 40 reviews	Excellent Thread! 5 stars.....

11-30-2014, 01:18 PM	#77
Bushido Post Whore! Join Date: Jun 2003 Location: SFL Posts: 3,562 Trader Rating: (10) Feedback Score: 10 reviews	cool car, man. __________________

12-02-2014, 04:29 PM	#81
DILLONDILLONDILLON! Zilvia Member Join Date: Dec 2013 Location: new jersey Age: 30 Posts: 206 Trader Rating: (2) Feedback Score: 2 reviews	Small Update today ! received my pass side door molding and emblem. Have also decided what im going to do for plans on rims. i will test fitment of the new front emblem . It has to small mounting tabs i will most likely remove the 3m double sided tape goes fully arounnd the whole emblem unlike the stock 240sx emblem. should have my type x wing in tommorrow and i will send it out to paint! __________________ http://springfieldnissan.com/

12-02-2014, 05:37 PM	#82
KoukiMonsta Nissanaholic! Join Date: Mar 2009 Location: NC Posts: 1,969 Trader Rating: (23) Feedback Score: 23 reviews	dem headlight surrounds cool build, keep it up __________________ @UpshiftEngineering

12-03-2014, 10:56 AM	#84
DILLONDILLONDILLON! Zilvia Member Join Date: Dec 2013 Location: new jersey Age: 30 Posts: 206 Trader Rating: (2) Feedback Score: 2 reviews	Hey guys!! so kinda a big UPDATE for me =] recieved my type X wing Brand new OEM. I will be bringing it to paint ASAP! It has all the mounting hardware No japanese instructions lol or templates but Im sure i will be able to make one up for future use or if anyone needs it! SWEET JESUS!! __________________ http://springfieldnissan.com/

12-03-2014, 01:37 PM	#86
forgotten Leaky Injector Join Date: Jan 2010 Location: Montreal Posts: 110 Trader Rating: (0) Feedback Score: 0 reviews	Lookes awsome man, love the details Nissan love!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode