No power any where - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

underground_army · 04-23-2010, 01:22 PM

Well like the titles says i have no power going to anything. i was changing my battery terminal clamps, whatever they are called. so while doing this i was really careful to not let the cables touch anything so i went on got it all nice and tight and got inside the car and there was no power to anything everything was off as if i never installed a battery. so the first thing i went to check out was if i had volts and yes i did 12.56 from battery i checked the cables next same thing 12v so i got the clamp on right next i went to the alternator fuse and it looks fine so i took it of and to see if anything was wrong and there isn't anything. now what do i do i'm lost and confused on what to do. help

c-los13 · 04-23-2010, 08:17 PM

alternator?

godrifttoday · 04-23-2010, 09:39 PM

The fuse u are checking is it a 75 amp??? It has to be a fuse... If not. Check ur grounds. A bad one should cause it to not start...

S13 IN MY BLOOD · 04-23-2010, 10:09 PM

What model do you have and year. I had same problem before and it turned out to be the ecu fuse in the engine compartment

iambape · 04-23-2010, 11:38 PM

check your battery fuse.

check all the fuse if anything.

underground_army · 04-24-2010, 12:37 PM

so after a while and a beer i found out that i didnt attach the 2 fuses or whatever they are that go to the battery. so i installed that and wala it turns on. always put everything back that you took off i learn my lesson lol

04-23-2010, 01:22 PM	#1
underground_army Zilvia Member Join Date: Feb 2009 Location: Tustin socal Age: 32 Posts: 247 Trader Rating: (12) Feedback Score: 12 reviews	No power any where Well like the titles says i have no power going to anything. i was changing my battery terminal clamps, whatever they are called. so while doing this i was really careful to not let the cables touch anything so i went on got it all nice and tight and got inside the car and there was no power to anything everything was off as if i never installed a battery. so the first thing i went to check out was if i had volts and yes i did 12.56 from battery i checked the cables next same thing 12v so i got the clamp on right next i went to the alternator fuse and it looks fine so i took it of and to see if anything was wrong and there isn't anything. now what do i do i'm lost and confused on what to do. help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-23-2010, 08:17 PM	#2
c-los13 Zilvia Junkie Join Date: Feb 2010 Location: Edinburg, Texas Age: 32 Posts: 445 Trader Rating: (0) Feedback Score: 0 reviews	alternator?

04-23-2010, 09:39 PM	#3
godrifttoday Post Whore! Join Date: Jan 2004 Location: los angeles Age: 37 Posts: 3,120 Trader Rating: (82) Feedback Score: 82 reviews	The fuse u are checking is it a 75 amp??? It has to be a fuse... If not. Check ur grounds. A bad one should cause it to not start...

04-23-2010, 10:09 PM	#4
S13 IN MY BLOOD Join Date: Apr 2010 Location: kissimmee Age: 36 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	What model do you have and year. I had same problem before and it turned out to be the ecu fuse in the engine compartment

04-23-2010, 11:38 PM	#5
iambape Zilvia Member Join Date: Aug 2009 Location: your moms house Posts: 151 Trader Rating: (0) Feedback Score: 0 reviews	check your battery fuse. check all the fuse if anything.

04-24-2010, 12:37 PM	#6
underground_army Zilvia Member Join Date: Feb 2009 Location: Tustin socal Age: 32 Posts: 247 Trader Rating: (12) Feedback Score: 12 reviews	so after a while and a beer i found out that i didnt attach the 2 fuses or whatever they are that go to the battery. so i installed that and wala it turns on. always put everything back that you took off i learn my lesson lol