SC Z32 30mm Calipers w/350z Track Rotors (F) + Stock S13/S14 Upgraded Brembo Setup (R) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Okinawandrifter87 · 08-08-2012, 03:57 PM

Not willing to part! Thanks!

I bought these brakes off of CrimsonRockett a few months backand barely even took them out of the box, they have not even been mounted. I am merely selling these with the intentions of getting what I paid for them. Hope Johnny doesn't mind me stealing these pics from his thread. The only thing thats added to this package was I bought a stainless steel line for the rear of the car for stock brakes, bracket for track rotors, and 350z Track 12.75 inch rotors. Here is a link to his old thread. I will be taking new pics when I get off work tonight.

S13/S14 300zx Brake Upgrade- SOLD!

Z32 30mm Calipers

350z Track Rotors 12.75 inch BNIB

Rear Setup

S13/S14 Brake Upgrade

Included in the package:
300zx 30mm Iron Calipers (purchased new)
BNIB 350z track rotors/ can include the Z32 Brembo rotors for a lil extra if you want.
Brembo S14 SE rear slotted rotors
Hawk HP Front/rear brake pads (85% life on all pads)
SPL Stainless steel brake lines F/R
Perfect set up for a daily driver or "weekend warrior".

The calipers were purchased new. Everything has less than 1,000 miles, just a bit dirty from sitting around for so long. Pads and rotors have a ton of life left.

Buying everything new would run you $820 ($150 calipers + $300 front rotors + $150 rear rotors + $85 front pads + $85 rear pads + $50 brake lines) .

Price - $460 + shipping + 3% paypal fee

Or $460 picked up locally! No lowballin!!!!

Brakes do not need rebuild however, I will include a new unopened rebuild kit for the Z32 brakes.

Okinawandrifter87 · 08-09-2012, 02:36 PM

Sorry for the delay on pics, just found out my grandfather passed away. Will be able to snag some pics today. Also willing to do $500 shipped for complete package.

Danietink37 · 08-11-2012, 06:04 PM

Bump for a good deal!

GigaRoc · 08-12-2012, 09:17 AM

Are the Calipers ALU or Iron?

2jdm4you · 08-12-2012, 09:37 AM

Read the post, it says iron, plus they dont say sumitomo in the pics. Free bump for a baller daily setup.

future · 08-12-2012, 09:50 AM

I don't see the adapters?

Okinawandrifter87 · 08-12-2012, 10:38 AM

I didn't take pics of the adapters yet, I'm on emergency leave right now for the funeral so didn't get a chance to snap a pic of them. Are you interested @ future?

future · 08-12-2012, 10:55 AM

I'm having trouble accepting that thesewere bought brand new, but need a rebuild?

Okinawandrifter87 · 08-12-2012, 11:13 AM

I think I maybe copied that from the post previously or just had something else in my mind while making this thread because I myself did not purchase them new. I purchased them from Crimsonrockett aka Johnny. Maybe he did, I'm not sure I'll have to check when I can get to a computer. Second off I never said they needed a rebuild as clearly posted in last line, I just said I would include one cause I had a spare sitting around in case the new owner felt inclined to do so anyway if he wanted to powder coated them.

That's all, thanks for bringing that to my attention though cause now I'm unsure if the last owner bought them néw or if I was tripping out when I made the post. Lmk if your interested though or just trollin. Either way thanks!

future · 08-12-2012, 11:18 AM

That was my fault I read that wrong. It says do not need rebuild

And yes I am actually interested. He front rotors are new. Are rear only have 1k? Buy are you asking $50 more then the last thread? What did you buy for the kit? Pm me

Okinawandrifter87 · 08-20-2012, 08:40 PM

Last bump, anyone interested? Had a couple flakers.

Okinawandrifter87 · 08-23-2012, 02:32 PM

Mods lock it up.. I'll make a new thread in a couple days. Thanks.

abes · 09-23-2012, 08:59 PM

If available, interested. PM Sent..

08-08-2012, 03:57 PM	#1
Okinawandrifter87 Post Whore! Join Date: Jun 2006 Location: Sacramento, CA Posts: 3,959 Trader Rating: (22) Feedback Score: 22 reviews	Z32 30mm Calipers w/350z Track Rotors (F) + Stock S13/S14 Upgraded Brembo Setup (R) Not willing to part! Thanks! I bought these brakes off of CrimsonRockett a few months backand barely even took them out of the box, they have not even been mounted. I am merely selling these with the intentions of getting what I paid for them. Hope Johnny doesn't mind me stealing these pics from his thread. The only thing thats added to this package was I bought a stainless steel line for the rear of the car for stock brakes, bracket for track rotors, and 350z Track 12.75 inch rotors. Here is a link to his old thread. I will be taking new pics when I get off work tonight. S13/S14 300zx Brake Upgrade- SOLD! Z32 30mm Calipers 350z Track Rotors 12.75 inch BNIB Rear Setup S13/S14 Brake Upgrade Included in the package: 300zx 30mm Iron Calipers (purchased new) BNIB 350z track rotors/ can include the Z32 Brembo rotors for a lil extra if you want. Brembo S14 SE rear slotted rotors Hawk HP Front/rear brake pads (85% life on all pads) SPL Stainless steel brake lines F/R Perfect set up for a daily driver or "weekend warrior". The calipers were purchased new. Everything has less than 1,000 miles, just a bit dirty from sitting around for so long. Pads and rotors have a ton of life left. Buying everything new would run you $820 ($150 calipers + $300 front rotors + $150 rear rotors + $85 front pads + $85 rear pads + $50 brake lines) . Price - $460 + shipping + 3% paypal fee Or $460 picked up locally! No lowballin!!!! Brakes do not need rebuild however, I will include a new unopened rebuild kit for the Z32 brakes. __________________ Driftphreak87 Last edited by Okinawandrifter87; 08-11-2012 at 06:02 PM..

08-09-2012, 02:36 PM	#2
Okinawandrifter87 Post Whore! Join Date: Jun 2006 Location: Sacramento, CA Posts: 3,959 Trader Rating: (22) Feedback Score: 22 reviews	Sorry for the delay on pics, just found out my grandfather passed away. Will be able to snag some pics today. Also willing to do $500 shipped for complete package. __________________ Driftphreak87

08-12-2012, 10:38 AM	#7
Okinawandrifter87 Post Whore! Join Date: Jun 2006 Location: Sacramento, CA Posts: 3,959 Trader Rating: (22) Feedback Score: 22 reviews	I didn't take pics of the adapters yet, I'm on emergency leave right now for the funeral so didn't get a chance to snap a pic of them. Are you interested @ future? __________________ Driftphreak87

08-12-2012, 11:13 AM	#9
Okinawandrifter87 Post Whore! Join Date: Jun 2006 Location: Sacramento, CA Posts: 3,959 Trader Rating: (22) Feedback Score: 22 reviews	I think I maybe copied that from the post previously or just had something else in my mind while making this thread because I myself did not purchase them new. I purchased them from Crimsonrockett aka Johnny. Maybe he did, I'm not sure I'll have to check when I can get to a computer. Second off I never said they needed a rebuild as clearly posted in last line, I just said I would include one cause I had a spare sitting around in case the new owner felt inclined to do so anyway if he wanted to powder coated them. That's all, thanks for bringing that to my attention though cause now I'm unsure if the last owner bought them néw or if I was tripping out when I made the post. Lmk if your interested though or just trollin. Either way thanks! __________________ Driftphreak87

08-20-2012, 08:40 PM	#11
Okinawandrifter87 Post Whore! Join Date: Jun 2006 Location: Sacramento, CA Posts: 3,959 Trader Rating: (22) Feedback Score: 22 reviews	Last bump, anyone interested? Had a couple flakers. __________________ Driftphreak87

08-11-2012, 06:04 PM	#3
Danietink37 Join Date: Apr 2012 Location: Sacramento, CA Age: 31 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Bump for a good deal!

08-12-2012, 09:17 AM	#4
GigaRoc Join Date: May 2012 Location: Central New Jersey Age: 38 Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	Are the Calipers ALU or Iron?

08-12-2012, 09:37 AM	#5
2jdm4you Zilvia Addict Join Date: Sep 2011 Location: NWI Age: 26 Posts: 627 Trader Rating: (13) Feedback Score: 13 reviews	Read the post, it says iron, plus they dont say sumitomo in the pics. Free bump for a baller daily setup.

08-23-2012, 02:32 PM	#12
Okinawandrifter87 Post Whore! Join Date: Jun 2006 Location: Sacramento, CA Posts: 3,959 Trader Rating: (22) Feedback Score: 22 reviews	Mods lock it up.. I'll make a new thread in a couple days. Thanks. __________________ Driftphreak87

09-23-2012, 08:59 PM	#13
abes Join Date: Aug 2007 Location: Miami, Fl. Age: 43 Posts: 46 Trader Rating: (2) Feedback Score: 2 reviews	If available, interested. PM Sent..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode