Differences in aftermarket swaybar difference - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

CrazyTrance · 12-04-2008, 10:34 AM

I dont know if this has been covered before but I'm trying to figure out what the clearance differences are between the aftermarket and stock front sway bars.

I have a problem where i got to know a curb real well and it bent up a lca, broke a tension rod, and now my sway bar wont clear the new oil pan i put on. When i look down the sway bar it seems to have bent. Well needles to say i dont have a front sway bar on my car anymore until i can either bend it back to fit, or buy a new one.

Anyways, with the vh45 i've got in there, the stock sway bar just BARELY fits to begin with and rubbed on the front of the oil pan anyways.

vv Pictures vv

Its kinda hard to tell from those pictures how close it really is, i dont have a picture from the side showing just how close it is. But i assure you there isn't much more than 1mm between the two.

So i'm curious which sway bars would actually allow for more clearance.

I'm pretty sure the whiteline one would as i've seen how low that one hangs. But what about the others? Anybody got pictures of them installed? I keep finding pictures of the bars, but not installed.

CrazyTrance · 12-05-2008, 02:08 PM

seriously? Nobody?

g6civcx · 12-05-2008, 03:08 PM

Quote:

Originally Posted by CrazyTrance

bent up a lca, broke a tension rod, and now my sway bar wont clear the new oil pan i put on. When i look down the sway bar it seems to have bent.

Nobody wants to touch this thread because of this. You're going to have a difficult time finding clearance specs especially if you don't say what your "swap" is.

5t341tH · 12-05-2008, 04:43 PM

looks like a VK45 from his avatar

CrazyTrance · 12-06-2008, 01:28 AM

Quote:

Originally Posted by g6civcx

Nobody wants to touch this thread because of this. You're going to have a difficult time finding clearance specs especially if you don't say what your "swap" is.

Ok.. all anyone had to do was ask then. I didn't think it was a big deal since all i asked was if anyone knew how much more clearance over stock certain aftermarket bars give.

I've got a vh45de in my coupe

12-04-2008, 10:34 AM	#1
CrazyTrance Zilvia Member Join Date: Sep 2004 Location: Tucson, AZ Age: 33 Posts: 273 Trader Rating: (3) Feedback Score: 3 reviews	swaybar clearances? I dont know if this has been covered before but I'm trying to figure out what the clearance differences are between the aftermarket and stock front sway bars. I have a problem where i got to know a curb real well and it bent up a lca, broke a tension rod, and now my sway bar wont clear the new oil pan i put on. When i look down the sway bar it seems to have bent. Well needles to say i dont have a front sway bar on my car anymore until i can either bend it back to fit, or buy a new one. Anyways, with the vh45 i've got in there, the stock sway bar just BARELY fits to begin with and rubbed on the front of the oil pan anyways. vv Pictures vv Its kinda hard to tell from those pictures how close it really is, i dont have a picture from the side showing just how close it is. But i assure you there isn't much more than 1mm between the two. So i'm curious which sway bars would actually allow for more clearance. I'm pretty sure the whiteline one would as i've seen how low that one hangs. But what about the others? Anybody got pictures of them installed? I keep finding pictures of the bars, but not installed. __________________ 450sx.com Last edited by CrazyTrance; 12-06-2008 at 01:33 AM..

12-05-2008, 02:08 PM	#2
CrazyTrance Zilvia Member Join Date: Sep 2004 Location: Tucson, AZ Age: 33 Posts: 273 Trader Rating: (3) Feedback Score: 3 reviews	seriously? Nobody? __________________ 450sx.com

12-05-2008, 04:43 PM	#4
5t341tH Post Whore! Join Date: Jun 2006 Location: socal (Huntington Beach) Age: 33 Posts: 2,776 Trader Rating: (14) Feedback Score: 14 reviews	looks like a VK45 from his avatar __________________ lexus baby

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode