signal start wire - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NathanBerge · 01-01-2018, 05:39 PM

hi, im sorry if this has been solved before but i could not find anything. Im having a issue where my signal start wire has no power. i have check continuity from the fuse block to where it plugs into the ecu and i do have continuity to the wire. i am getting power to the fuse and it is not blown but still no power to where it plugs into the harness to the ecu any ideas?

nisileighty · 01-01-2018, 05:42 PM

Orange wire on the brown dash plug. Remove your glove box and you’ll see it. Make sure it is connected at the plug, and then check for continuity between the upper plug and the ignition tumbler. If there is, and it is connected, look on the starter. It’s common for the starter signal wire to come disconnected

Sent from my iPhone using Tapatalk

NathanBerge · 01-01-2018, 05:54 PM

I don’t see a orange wire going to the ignition tumbler, which wire do I check continuity at the tumblr

nisileighty · 01-01-2018, 05:58 PM

Not sure why you wouldn’t just try all four... doesn’t hurt

Sent from my iPhone using Tapatalk

NathanBerge · 01-01-2018, 06:02 PM

None of the 4 wires at the ignition tumbler gave me continuity to the orange wire at the brown plug

nisileighty · 01-01-2018, 06:03 PM

You got a break in the wiring somewhere along there then I would say

Sent from my iPhone using Tapatalk

NathanBerge · 01-08-2018, 10:30 PM

Okay after further testing I am getting continuity from the tumbler to the orange wire! I am getting power in and out of the fuse block as well as continuity from the tumbler to the fuse block but yet still no power in the orange wire any ideas ?

smoked240 · 01-09-2018, 07:24 AM

Quote:

Originally Posted by NathanBerge

Okay after further testing I am getting continuity from the tumbler to the orange wire! I am getting power in and out of the fuse block as well as continuity from the tumbler to the fuse block but yet still no power in the orange wire any ideas ?

Check resistance in the orange wire I would say.

01-01-2018, 05:39 PM	#1
NathanBerge Join Date: Jan 2017 Location: california Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	signal start wire hi, im sorry if this has been solved before but i could not find anything. Im having a issue where my signal start wire has no power. i have check continuity from the fuse block to where it plugs into the ecu and i do have continuity to the wire. i am getting power to the fuse and it is not blown but still no power to where it plugs into the harness to the ecu any ideas?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-01-2018, 05:42 PM	#2
nisileighty Zilvia FREAK! Join Date: Feb 2016 Location: Seattle, WA Posts: 1,215 Trader Rating: (4) Feedback Score: 4 reviews	Orange wire on the brown dash plug. Remove your glove box and you’ll see it. Make sure it is connected at the plug, and then check for continuity between the upper plug and the ignition tumbler. If there is, and it is connected, look on the starter. It’s common for the starter signal wire to come disconnected Sent from my iPhone using Tapatalk

01-01-2018, 05:54 PM	#3
NathanBerge Join Date: Jan 2017 Location: california Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	I don’t see a orange wire going to the ignition tumbler, which wire do I check continuity at the tumblr

01-01-2018, 05:58 PM	#4
nisileighty Zilvia FREAK! Join Date: Feb 2016 Location: Seattle, WA Posts: 1,215 Trader Rating: (4) Feedback Score: 4 reviews	Not sure why you wouldn’t just try all four... doesn’t hurt Sent from my iPhone using Tapatalk

01-01-2018, 06:02 PM	#5
NathanBerge Join Date: Jan 2017 Location: california Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	None of the 4 wires at the ignition tumbler gave me continuity to the orange wire at the brown plug

01-01-2018, 06:03 PM	#6
nisileighty Zilvia FREAK! Join Date: Feb 2016 Location: Seattle, WA Posts: 1,215 Trader Rating: (4) Feedback Score: 4 reviews	You got a break in the wiring somewhere along there then I would say Sent from my iPhone using Tapatalk

01-08-2018, 10:30 PM	#7
NathanBerge Join Date: Jan 2017 Location: california Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	Okay after further testing I am getting continuity from the tumbler to the orange wire! I am getting power in and out of the fuse block as well as continuity from the tumbler to the fuse block but yet still no power in the orange wire any ideas ?