HOw to remove rear quarter panel window 95 240sx?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dirteeboy808 · 05-18-2009, 01:39 PM

Is there a way without cutting up the OEM seals? If I do cut up the seal where do they sell only the rubber seals w/o the glass?

thanks....I could only find one other thread and there wasn't too much info

projectRDM · 05-18-2009, 04:07 PM

The moulding is not sold separately, you buy it prefitted to the glass, no other way. Use a right angle glass cutter and a heat gun, on a good hot afternoon you can almost pry the glass loose, so just heat it up and cut from the inside, slowly prying on the moulding only. Don't put pressure or contact the glass at all.

repda916 · 05-18-2009, 11:03 PM

can you do this with a front windshield?

GSXRJJordan · 05-19-2009, 05:32 AM

Windshields are much easier to pull out than quarter glass - I've seen amateurs pull out windshields before, but never seen anyone do quarter glass without breaking it half way through. It's really sad to watch, actually lol.

projectRDM · 05-19-2009, 07:57 AM

Odd, I always break windshields but have never broken a quarter glass. I've got about a dozen of them laying around from parts cars in fact.

s142jzkillav10 · 05-19-2009, 08:04 PM

you can use wire ( similar to throttle cable) and tie to ends to a tube ( pvc ) and pass the wire back and forth throw the windos cutting away at the silicon. GL

Shift_Cory · 05-19-2009, 08:48 PM

ya thats they way they did it at school in the autobody program... they used i think piano wire? with like 2 handles i think they would put the wire through then put the handle on, on the other side of the window. and then 2 guys would kindof "saw" around the window through the glue. me personally would just pay someone to do it, its deffinatly a pain in the ass. ive broke a few myself

05-18-2009, 01:39 PM	#1
dirteeboy808 Zilvia Junkie Join Date: Feb 2008 Location: Oahu, Hawaii Posts: 311 Trader Rating: (19) Feedback Score: 19 reviews	HOw to remove rear quarter panel window 95 240sx?? Is there a way without cutting up the OEM seals? If I do cut up the seal where do they sell only the rubber seals w/o the glass? thanks....I could only find one other thread and there wasn't too much info

05-18-2009, 04:07 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	The moulding is not sold separately, you buy it prefitted to the glass, no other way. Use a right angle glass cutter and a heat gun, on a good hot afternoon you can almost pry the glass loose, so just heat it up and cut from the inside, slowly prying on the moulding only. Don't put pressure or contact the glass at all. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

05-19-2009, 05:32 AM	#4
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	Windshields are much easier to pull out than quarter glass - I've seen amateurs pull out windshields before, but never seen anyone do quarter glass without breaking it half way through. It's really sad to watch, actually lol. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

05-19-2009, 07:57 AM	#5
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Odd, I always break windshields but have never broken a quarter glass. I've got about a dozen of them laying around from parts cars in fact. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-18-2009, 11:03 PM	#3
repda916 Zilvia Addict Join Date: Jun 2008 Location: cali Age: 29 Posts: 999 Trader Rating: (0) Feedback Score: 0 reviews	can you do this with a front windshield?

05-19-2009, 08:04 PM	#6
s142jzkillav10 Zilvia Junkie Join Date: Mar 2009 Location: Kill Devil Hills, NC aka OBX Posts: 309 Trader Rating: (5) Feedback Score: 5 reviews	you can use wire ( similar to throttle cable) and tie to ends to a tube ( pvc ) and pass the wire back and forth throw the windos cutting away at the silicon. GL

05-19-2009, 08:48 PM	#7
Shift_Cory Banned from the Marketplace Join Date: Dec 2008 Location: Northern Illinois Posts: 261 Trader Rating: (11) Feedback Score: 11 reviews	ya thats they way they did it at school in the autobody program... they used i think piano wire? with like 2 handles i think they would put the wire through then put the handle on, on the other side of the window. and then 2 guys would kindof "saw" around the window through the glue. me personally would just pay someone to do it, its deffinatly a pain in the ass. ive broke a few myself