Sr21Det - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

[email protected] · 06-13-2011, 04:03 PM

Just been on this build for a while
and this is what I got.
8.5=1 cp piston, eagle rods, acl main, rods , thrust
Bearings honed and bored block .20 over= 86.50
Not 86 no more lol, gt3071r turbo top mount
manifold 38 mm. wastegatearp bolts 87mm apex
metal head Gasket, specs clutch stage 3 6 puck
Everything Is stock except front mount and soon
Walbro255Lph high volume fuel pump with fpr
and 750cc injectors. Now the question is how much
power can I make? With stock tune and then
aem ems. I also have a stock det head
not ve sorry. guys lol

[email protected] · 06-14-2011, 02:15 AM

Bump, let me know what you think

evomike · 06-14-2011, 02:26 AM

Put it together and find out

[email protected] · 06-14-2011, 03:26 AM

Slowly but surely just anxious but
Doing it right no rushing. Wanted to see
If Anyone Has done it before and wat
numbers they made.

[email protected] · 06-14-2011, 03:28 AM

Slowly but surely just anxious but
Doing it right no rushing. Wanted to see
If Anyone Has done it before and wat
numbers they made.

SLiDe_WaYz · 06-14-2011, 03:51 AM

Built block, stand alone, but stock head?

With that big turbo get cams other wise that turbo just won't get enough air to breath. Cams will bring it to life.

[email protected] · 06-14-2011, 11:09 AM

TheHead is stock for now will up grade
To Bc cams maybe 264 or 272 with
Spring, retainers, solid lifters and a valve job
In The future this is my only car and
needs transportation quick so trying to build a
FastDaily driver

[email protected] · 06-14-2011, 11:35 AM

TheHead is stock for now will up grade
To Bc cams maybe 264 or 272 with
Spring, retainers, solid lifters and a valve job
In The future this is my only car and
needs transportation quick so trying to build a
FastDaily driver

street_sleeper · 08-28-2012, 05:34 AM

I had a similar setup back in the day but with the BC valve train goodies and 550cc's and made 355whp and 3something tq.

onehundredoctane · 08-28-2012, 07:03 AM

I'm betting somewhere upwards of 350 whp. I have a GT3071R, Crower rods, CP pistons (9:1), built head and 1000cc injectors and cranked out 435 whp on 20 psi.

[email protected] · 08-28-2012, 08:30 AM

This build was done a long time ago and with
t3/,t3 Turbo but the shop who put it together didn't torque
nothing to correct specs so piston hit top.of the valve rod hit side of the wall and
Put two holes in it but now I got s13 SR stock motor with s14
Turbo 550cc injectors z32 maf and a romtune at 16 psi hopefully next month going to dyno and make
325hp

06-13-2011, 04:03 PM	#1
[email protected] Leaky Injector Join Date: Apr 2011 Location: FL Age: 35 Posts: 74 Trader Rating: (1) Feedback Score: 1 reviews	Sr21Det Just been on this build for a while and this is what I got. 8.5=1 cp piston, eagle rods, acl main, rods , thrust Bearings honed and bored block .20 over= 86.50 Not 86 no more lol, gt3071r turbo top mount manifold 38 mm. wastegatearp bolts 87mm apex metal head Gasket, specs clutch stage 3 6 puck Everything Is stock except front mount and soon Walbro255Lph high volume fuel pump with fpr and 750cc injectors. Now the question is how much power can I make? With stock tune and then aem ems. I also have a stock det head not ve sorry. guys lol Last edited by [email protected]; 06-13-2011 at 05:10 PM.. Reason: Thread not posting

06-14-2011, 03:51 AM	#6
SLiDe_WaYz Zilvia FREAK! Join Date: May 2011 Location: Texas Age: 31 Posts: 1,282 Trader Rating: (6) Feedback Score: 6 reviews	Built block, stand alone, but stock head? With that big turbo get cams other wise that turbo just won't get enough air to breath. Cams will bring it to life. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-14-2011, 02:15 AM	#2
[email protected] Leaky Injector Join Date: Apr 2011 Location: FL Age: 35 Posts: 74 Trader Rating: (1) Feedback Score: 1 reviews	Bump, let me know what you think

06-14-2011, 02:26 AM	#3
evomike Zilvia Member Join Date: Jun 2009 Location: philly Age: 39 Posts: 233 Trader Rating: (0) Feedback Score: 0 reviews	Put it together and find out

06-14-2011, 03:26 AM	#4
[email protected] Leaky Injector Join Date: Apr 2011 Location: FL Age: 35 Posts: 74 Trader Rating: (1) Feedback Score: 1 reviews	Slowly but surely just anxious but Doing it right no rushing. Wanted to see If Anyone Has done it before and wat numbers they made.

06-14-2011, 03:28 AM	#5
[email protected] Leaky Injector Join Date: Apr 2011 Location: FL Age: 35 Posts: 74 Trader Rating: (1) Feedback Score: 1 reviews	Slowly but surely just anxious but Doing it right no rushing. Wanted to see If Anyone Has done it before and wat numbers they made.

06-14-2011, 11:09 AM	#7
[email protected] Leaky Injector Join Date: Apr 2011 Location: FL Age: 35 Posts: 74 Trader Rating: (1) Feedback Score: 1 reviews	TheHead is stock for now will up grade To Bc cams maybe 264 or 272 with Spring, retainers, solid lifters and a valve job In The future this is my only car and needs transportation quick so trying to build a FastDaily driver

06-14-2011, 11:35 AM	#8
[email protected] Leaky Injector Join Date: Apr 2011 Location: FL Age: 35 Posts: 74 Trader Rating: (1) Feedback Score: 1 reviews	TheHead is stock for now will up grade To Bc cams maybe 264 or 272 with Spring, retainers, solid lifters and a valve job In The future this is my only car and needs transportation quick so trying to build a FastDaily driver

08-28-2012, 05:34 AM	#9
street_sleeper Zilvia Junkie Join Date: Jun 2005 Location: Georgetown TX Age: 37 Posts: 341 Trader Rating: (0) Feedback Score: 0 reviews	I had a similar setup back in the day but with the BC valve train goodies and 550cc's and made 355whp and 3something tq.

08-28-2012, 07:03 AM	#10
onehundredoctane Post Whore! Join Date: Oct 2006 Location: Greensborough, NC Posts: 2,783 Trader Rating: (3) Feedback Score: 3 reviews	I'm betting somewhere upwards of 350 whp. I have a GT3071R, Crower rods, CP pistons (9:1), built head and 1000cc injectors and cranked out 435 whp on 20 psi.

08-28-2012, 08:30 AM	#11
[email protected] Leaky Injector Join Date: Apr 2011 Location: FL Age: 35 Posts: 74 Trader Rating: (1) Feedback Score: 1 reviews	This build was done a long time ago and with t3/,t3 Turbo but the shop who put it together didn't torque nothing to correct specs so piston hit top.of the valve rod hit side of the wall and Put two holes in it but now I got s13 SR stock motor with s14 Turbo 550cc injectors z32 maf and a romtune at 16 psi hopefully next month going to dyno and make 325hp